5962-1021701KXA datasheet, PDF

Datasheet> All Categories > Power/power management> The power supply circuit> 5962-1021701KXA

5962-1021701KXA: DescriptionDC-DC Regulated Power Supply Module, 1 Output, 50W, Hybrid, HERMETIC SEALED PACKAGE-13; CategoryPower/power management The power supply circuit; File Size121KB，12 Pages; ManufacturerInfineon; Websitehttp://www.infineon.com/

Download Datasheet Parametric Compare View All

5962-1021701KXA Overview

DC-DC Regulated Power Supply Module, 1 Output, 50W, Hybrid, HERMETIC SEALED PACKAGE-13

5962-1021701KXA Parametric

Parameter Name	Attribute value
package instruction	, MODULE,13LEAD,3.5
Reach Compliance Code	compli
Analog Integrated Circuits - Other Types	DC-DC REGULATED POWER SUPPLY MODULE
Maximum input voltage	40 V
Minimum input voltage	18 V
Nominal input voltage	28 V
JESD-30 code	R-CDMA-P13
Number of functions	1
Output times	1
Number of terminals	13
Maximum operating temperature	125 °C
Minimum operating temperature	-55 °C
Maximum output current	15.15 A
Maximum output voltage	3.36 V
Minimum output voltage	3.24 V
Nominal output voltage	3.3 V
Package body material	CERAMIC, METAL-SEALED COFIRED
Encapsulate equivalent code	MODULE,13LEAD,3.5
Package shape	RECTANGULAR
Package form	MICROELECTRONIC ASSEMBLY
Certification status	Qualified
Filter level	MIL-PRF-38534 Class K
surface mount	NO
technology	HYBRID
Temperature level	MILITARY
Terminal form	PIN/PEG
Terminal location	DUAL
Maximum total power output	50 W
Fine-tuning/adjustable output	NO
Base Number Matches	1

Preview

Download Datasheet

View All

REVISIONS

LTR

DESCRIPTION

DATE (YR-MO-DA)

APPROVED

REV

SHEET

REV

SHEET

REV STATUS

OF SHEETS

PMIC N/A

REV

SHEET

PREPARED BY

Greg Cecil

CHECKED BY

Greg Cecil

STANDARD

MICROCIRCUIT

DRAWING

THIS DRAWING IS

AVAILABLE

FOR USE BY ALL

DEPARTMENTS

AND AGENCIES OF THE

DEPARTMENT OF DEFENSE

AMSC N/A

DEFENSE SUPPLY CENTER COLUMBUS

COLUMBUS, OHIO 43218-3990

http://www.dscc.dla.mil

APPROVED BY

Charles F. Saffle

MICROCIRCUIT, HYBRID, 3.3 VOLT, SINGLE

CHANNEL, DC/DC CONVERTER

DRAWING APPROVAL DATE

10-04-21

REVISION LEVEL

SIZE

SHEET

CAGE CODE

67268

1 OF

5962-10217

DSCC FORM 2233

APR 97

5962-E189-10

1.3 Absolute maximum ratings. 1/

Input voltage range ....................................................................

Lead temperature (soldering, 10 seconds).................................

Storage temperature ..................................................................

1.4 Recommended operating conditions.

Input voltage range ....................................................................

Output power 2/ 3/ .....................................................................

Case operating temperature range (T

) 4/ .................................

2. APPLICABLE DOCUMENTS

2.1 Government specification, standards, and handbooks. The following specification, standards, and handbooks form a part

of this drawing to the extent specified herein. Unless otherwise specified, the issues of these documents are those cited in the

solicitation or contract.

DEPARTMENT OF DEFENSE SPECIFICATION

MIL-PRF-38534 - Hybrid Microcircuits, General Specification for.

DEPARTMENT OF DEFENSE STANDARDS

MIL-STD-883 - Test Method Standard Microcircuits.

MIL-STD-1835 - Interface Standard for Electronic Component Case Outlines.

DEPARTMENT OF DEFENSE HANDBOOKS

MIL-HDBK-103 - List of Standard Microcircuit Drawings.

MIL-HDBK-780 - Standard Microcircuit Drawings.

(Copies of these documents are available online at

https://assist.daps.dla.mil/quicksearch/

or from the Standardization

Document Order Desk, 700 Robbins Avenue, Building 4D, Philadelphia, PA 19111-5094.)

2.2 Order of precedence. In the event of a conflict between the text of this drawing and the references cited herein, the text of

this drawing takes precedence. Nothing in this document, however, supersedes applicable laws and regulations unless a

specific exemption has been obtained.

3. REQUIREMENTS

3.1 Item requirements. The individual item performance requirements for device classes D, E, G, H, and K shall be in

accordance with MIL-PRF-38534. Compliance with MIL-PRF-38534 may include the performance of all tests herein or as

designated in the device manufacturer's Quality Management (QM) plan or as designated for the applicable device class.

Therefore, the tests and inspections herein may not be performed for the applicable device class (see MIL-PRF-38534). The

manufacturer may eliminate, modify or optimize the tests and inspections herein, however the performance requirements as

defined in MIL-PRF-38534 shall be met for the applicable device class. In addition, the modification in the QM plan shall not

affect the form, fit, or function of the device for the applicable device class.

+18 V dc to +40 V dc



50 W

-55C to +125C

-0.5 V dc to +50 V dc

+300C

-55C to +125C

Stresses above the absolute maximum ratings may cause permanent damage to the device. Extended operation at the

maximum levels may degrade performance and affect reliability.

Derate output power linearly above case temperature +125C to 0 at +135C.

Limit represent 80 percent of total rated output current. To achieve rated output power, the remaining 20 percent of the total

rated output current must be provided by the other output.

For operation at temperatures between +85C and +125C, derate the maximum input voltage linearly from 60 V dc to 40 V

dc and the maximum output power linearly from 100 percent to 75 percent.

STANDARD

MICROCIRCUIT DRAWING

DEFENSE SUPPLY CENTER COLUMBUS

COLUMBUS, OHIO 43218-3990

DSCC FORM 2234

APR 97

SIZE

REVISION LEVEL

5962-10217

SHEET

3.2 Design, construction, and physical dimensions. The design, construction, and physical dimensions shall be as specified in

MIL-PRF-38534 and herein.

3.2.1 Case outline(s). The case outline(s) shall be in accordance with 1.2.4 herein and figure 1.

3.2.2 Terminal connections. The terminal connections shall be as specified on figure 2.

3.3 Electrical performance characteristics. Unless otherwise specified herein, the electrical performance characteristics are

as specified in table I and shall apply over the full specified operating temperature range.

3.4 Electrical test requirements. The electrical test requirements shall be the subgroups specified in table II. The electrical

tests for each subgroup are defined in table I.

3.5 Marking of device(s). Marking of device(s) shall be in accordance with MIL-PRF-38534. The device shall be marked with

the PIN listed in 1.2 herein. In addition, the manufacturer's vendor similar PIN may also be marked.

3.6 Data. In addition to the general performance requirements of MIL-PRF-38534, the manufacturer of the device described

herein shall maintain the electrical test data (variables format) from the initial quality conformance inspection group A lot sample,

for each device type listed herein. Also, the data should include a summary of all parameters manually tested, and for those

which, if any, are guaranteed. This data shall be maintained under document revision level control by the manufacturer and be

made available to the preparing activity (DSCC-VA) upon request.

3.7 Certificate of compliance. A certificate of compliance shall be required from a manufacturer in order to supply to this

drawing. The certificate of compliance (original copy) submitted to DSCC-VA shall affirm that the manufacturer's product meets

the performance requirements of MIL-PRF-38534 and herein.

3.8 Certificate of conformance. A certificate of conformance as required in MIL-PRF-38534 shall be provided with each lot of

microcircuits delivered to this drawing.

4. VERIFICATION

4.1 Sampling and inspection. Sampling and inspection procedures shall be in accordance with MIL-PRF-38534 or as

modified in the device manufacturer's Quality Management (QM) plan. The modification in the QM plan shall not affect the form,

fit, or function as described herein.

4.2 Screening. Screening shall be in accordance with MIL-PRF-38534. The following additional criteria shall apply:

Burn-in test, method 1015 of MIL-STD-883.

(1)

Test condition A, B, C, or D. The test circuit shall be maintained by the manufacturer under document revision level

control and shall be made available to either DSCC-VA or the acquiring activity upon request. Also, the test circuit

shall specify the inputs, outputs, biases, and power dissipation, as applicable, in accordance with the intent specified

in method 1015 of MIL-STD-883.

as specified in accordance with table I of method 1015 of MIL-STD-883.

(2)

Interim and final electrical test parameters shall be as specified in table II herein, except interim electrical parameter

tests prior to burn-in are optional at the discretion of the manufacturer.

STANDARD

MICROCIRCUIT DRAWING

DEFENSE SUPPLY CENTER COLUMBUS

COLUMBUS, OHIO 43218-3990

DSCC FORM 2234

APR 97

SIZE

REVISION LEVEL

5962-10217

SHEET

5962-1021701KXA Related Products

	5962-1021701KXA	5962-1021701KXC
Description	DC-DC Regulated Power Supply Module, 1 Output, 50W, Hybrid, HERMETIC SEALED PACKAGE-13	DC-DC Regulated Power Supply Module, 1 Output, 50W, Hybrid, HERMETIC SEALED PACKAGE-13
package instruction	, MODULE,13LEAD,3.5	HERMETIC SEALED PACKAGE-13
Reach Compliance Code	compli	compliant
Analog Integrated Circuits - Other Types	DC-DC REGULATED POWER SUPPLY MODULE	DC-DC REGULATED POWER SUPPLY MODULE
Maximum input voltage	40 V	40 V
Minimum input voltage	18 V	18 V
Nominal input voltage	28 V	28 V
JESD-30 code	R-CDMA-P13	R-CDMA-P13
Number of functions	1	1
Output times	1	1
Number of terminals	13	13
Maximum operating temperature	125 °C	125 °C
Minimum operating temperature	-55 °C	-55 °C
Maximum output current	15.15 A	15.15 A
Maximum output voltage	3.36 V	3.36 V
Minimum output voltage	3.24 V	3.24 V
Nominal output voltage	3.3 V	3.3 V
Package body material	CERAMIC, METAL-SEALED COFIRED	CERAMIC, METAL-SEALED COFIRED
Encapsulate equivalent code	MODULE,13LEAD,3.5	MODULE,13LEAD,3.5
Package shape	RECTANGULAR	RECTANGULAR
Package form	MICROELECTRONIC ASSEMBLY	MICROELECTRONIC ASSEMBLY
Certification status	Qualified	Qualified
Filter level	MIL-PRF-38534 Class K	MIL-PRF-38534 Class K
surface mount	NO	NO
technology	HYBRID	HYBRID
Temperature level	MILITARY	MILITARY
Terminal form	PIN/PEG	PIN/PEG
Terminal location	DUAL	DUAL
Maximum total power output	50 W	50 W
Fine-tuning/adjustable output	NO	NO
Base Number Matches	1	1

Recommended Resources

Adjustable low power DC-DC converter circuit

Photoelectric tube control circuit

Ring detector circuit

Floating adjustable regulated power supply circuit diagram b using μA723

5V precision voltage reference circuit

Ozone generator circuit for motorcycles

Some thoughts on infrared: [i=s] This post was last edited by paulhyde on 2014-9-15 03:14 [/i] Since infrared voice transmission can be done by analog, I later experimented with using pulse width modulation to modulate a signal...; 平行电 Electronics Design Contest

How to change the display of the digital tube through serial communication: In this code, I want to use the serial port assistant to control the display of the digital tube, but I don’t want to put the display program in interrupt 4 (that is, I want to control the change of t...; 胡豆豆的春天 51mcu

DTCP: Has anyone worked on DTCP? I remember there is an HDCP in HDMI. The Authentication Key, Exchange Key, and Content Key are known to me, but not to him. Does anyone know the specific meaning of these ke...; 5525 FPGA/CPLD

Yian Data Recovery 010--51293635 Hard Drive Data Recovery Digital Camera Data Recovery Password Cracking Secret Server Data Recovery: Yian Data Recovery 010--51293635 hard drive data recovery digital camera data recovery password cracking server data recovery USB disk data recovery mobile hard disk data recovery decryption password ...; ltby00 Embedded System

"FPGA Three Kingdoms" FPGA is superior to CPLD: At present, CPLD mainly includes: I/O Expander protocal bridge glue logic config or power sequence management. FPGA: Basically, it can build many SOPC applications, because the current development of ...; liumnqti FPGA/CPLD

What is the upper limit frequency of the 103ZE timer external mode 1 count?: I use the external clock mode 1 of STM32's TIM2 or TIM8 to count an external 50M square wave. Theoretically, 50,000 numbers can be counted in 1ms, but in reality, only more than 24,000 numbers are cou...; sealcold stm32/stm8

Shortcut: L0 L1 L2 L3 L4 L5 L6 L7 L8 L9 LA LB LC LD LE LF LG LH LI LJ LK LL LM LN LO LP LQ LR LS LT LU LV LW LX LY LZ M0 M1 M2 M3 M4 M5 M6 M7 M8 M9 MA MB MC MD ME MF MG MH MI MJ MK ML MM MN MO MP MQ MR MS MT MU MV MW MX MY MZ N0 N1 N2 N3 N4 N5 N6 N7 N8 NA NB NC ND NE NF NG NH NI NJ NK NL NM NN NO NP NQ NR NS NT NU NV NX NZ O0 O1 O2 O3 OA OB OC OD OE OF OG OH OI OJ OK OL OM ON OP OQ OR OS OT OV OX OY OZ P0 P1 P2 P3 P4 P5 P6 P7 P8 P9 PA PB PC PD PE PF PG PH PI PJ PK PL PM PN PO PP PQ PR PS PT PU PV PW PX PY PZ Q1 Q2 Q3 Q4 Q5 Q6 Q8 Q9 QA QB QC QE QF QG QH QK QL QM QP QR QS QT QV QW QX QY R0 R1 R2 R3 R4 R5 R6 R7 R8 R9 RA RB RC RD RE RF RG RH RI RJ RK RL RM RN RO RP RQ RR RS RT RU RV RW RX RY RZ

Popular Components