RoHS Compliant
Serial ATA Flash Drive
SAFD25M4 Product Specifications
June 13
th
, 2013
Version 1.5
Apacer Technology Inc.
Apacer Technology Inc.
9/F, No. 100, Hsin Tai Wu Rd., Hsichih, Taipei Hsien 221, Taiwan
th
4 Fl., 75 Hsin Tai Wu Rd., Sec.1, Xizhi, New Taipei City, Taiwan 221
Tel: +886-2-2696-1666 Fax: +886-2-2696-1668
Tel: +886-2-2698-2888 Fax: +886-2-2698-2889
www.apacer.com
www.apacer.com
Serial ATA Flash Drive
APS25M5Xxxxx-PXX
Features:
Standard Serial ATA Revision 2.6
–
Serial ATA Revision 2.6
–
SATA 3.0 Gbps
–
ATA-compatible command set
–
ATA modes support
Capacities
–
4, 8, 16, 32, 64 GB
Performance*
–
Burst read/write:
300
MB/sec
–
Sustained read: up to 165 MB/sec
–
Sustained write: up to 150 MB/sec
Intelligent endurance design
–
Built-in hardware ECC, enabling up to
16/24 bit correction per 1K bytes
–
Static wear-leveling scheme together
with dynamical block allocation to
significantly increase the lifetime of a
flash device and optimize the disk
performance
–
Flash bad-block management
–
S.M.A.R.T.
–
Power Failure Management
–
ATA Secure Erase
–
TRIM
NAND Flash Type:
SLC
Endurance
–
4GB: 320 TBW
–
8GB: 640 TBW
–
16GB: 1,280 TBW
–
32GB: 2,560 TBW
–
64GB: 5,130 TBW
Temperature ranges
–
Operation: 0° to 70° (32 ~ 158°
C
C
F)
–
Extended: -40° to 85° (-40° ~ 185°
C
C
F)
–
Storage: -40° to 100° (-40° ~ 212°
C
C
F)
Supply voltage
–
5.0 V
5%
Power consumption (typical)*
–
Active mode: 335 mA
–
Idle mode: 95 mA
Form factor
–
2.5 inch” (70.00 x 48.66 x 9.25**, unit: mm)
Connector
–
7-pin SATA signal connector
–
15-pin SATA power connector
Shock & Vibration***
–
Shock: 1500 G
–
Vibration: 15 G
RoHS Recast compliant (2011/65/EU)
Write Protect (optional)
–
Enabled by onboard hardware switch
*Varies
from capacities. The values addressed for Performance and Power consumptions are typical and may vary depending on settings
and platforms.
**Including the width of the side brackets. Please “Physical Characteristics” for details.
***Non-operating
Notes about TBW: TBW is the abbreviation of Terabytes Written and it serves as an endurance indicator, though results may change due
to external factors in real world applications.
1
© 2013 Apacer Technology Inc.
Rev. 1.5
±
Serial ATA Flash Drive
APS25M5Xxxxx-PXX
Table of Contents
1. Product Description ................................................................................................. 3
1.1 Introduction .................................................................................................................................................3
1.2 Functional Block Diagram..........................................................................................................................3
1.3
ATA Mode Support ....................................................................................................................................4
1.4 Capacity Specification.................................................................................................................................4
1.5 Performance.................................................................................................................................................4
1.6 Pin Assignments ..........................................................................................................................................5
2. Software Interface .................................................................................................... 7
2.1 Command Set ..............................................................................................................................................7
2.2 S.M.A.R.T.......................................................................................................................................................7
3. Flash Management ................................................................................................... 8
3.1 Error Correction/Detection ........................................................................................................................8
3.2 Bad Block Management..............................................................................................................................8
3.3 Wear Leveling..............................................................................................................................................8
3.4 Power Failure Management .......................................................................................................................8
3.5 ATA Secure Erase .......................................................................................................................................8
3.6 TRIM............................................................................................................................................................9
4. Environmental Specifications ............................................................................... 10
4.1 Environments.............................................................................................................................................10
4.2 Mean Time Between Failures (MTBF)....................................................................................................10
4.3 Certification and Compliance ..................................................................................................................10
4.4 Endurance ...................................................................................................................................................10
5. Electrical Characteristics ...................................................................................... 12
5.1 Operating Voltage .....................................................................................................................................12
5.2 Power Consumption..................................................................................................................................12
6. Physical Characteristics........................................................................................ 13
6.1 Dimensions .................................................................................................................................................13
6.2 Write Protect Switch (optional).................................................................................................................14
7. Product Ordering Information ............................................................................... 15
7.1 Product Code Designations ......................................................................................................................15
7.2 Valid Combinations...................................................................................................................................16
2
© 2013 Apacer Technology Inc.
Rev. 1.5
Serial ATA Flash Drive
APS25M5Xxxxx-PXX
1. Product Description
1.1
Introduction
Apacer’s Serial ATA Flash Drive (SAFD) is a non-volatile SATA solid-state drive (SSD) that serves as the
ideal boot drive or mass storage device. Compliant with SATA 3.0 Gbps standard, the drive conforms to most
mainstream host system platforms with SATA-compliant interfaces, making it the primary storage solution for
replacing traditional hard disk drive.
SAFD 25M4 drive is designed with a powerful controller, offering capacities of up to 64 gigabytes and
providing full support for the SATA 3.0 Gbps high-speed interface standard. It can operate at sustained
access rates up to 165 megabytes per second, while power consumption remains at minimal level. Regarding
data integrity and memory efficiency, the controller unit of the device handles wear leveling, ECC, bad block
management and power management in urgent situations.
In addition, SAFD 25M4 adopts the global wear-leveling scheme to allow uniform use of all storage blocks,
ensuring that the lifespan of a flash media can be significantly increased and the disk performance is
optimized as well. SAFD 25M4 provides the S.M.A.R.T. feature that follows the SATA Rev. 2.6, ATA/ATAPI
specifications and uses the standard SMART command B0h to read data from the drive. This feature protects
the user from unscheduled downtime by monitoring and storing critical drive performance.
1.2
Functional Block Diagram
SAFD25M4 drive includes a single-chip SATA Controller and the flash media, as well as the SATA standard
interface. The controller integrates the flash management unit with the controller itself to support multi-channel,
multi-bank flash arrays. Figure 1-1 shows the functional block diagram.
Figure 1-1
Apacer SAFD25M4 block diagram
3
© 2013 Apacer Technology Inc.
Rev. 1.5
Serial ATA Flash Drive
APS25M5Xxxxx-PXX
1.3
ATA Mode Support
Up to PIO mode-4
Up to Multiword DMA mode-2
Up to UDMA mode-5
SAFD25M4 provides ATA mode support as follows:
1.4
Capacity Specification
Capacity specification of SAFD25M4 product family is available as shown in Table 1-1. It lists the specific
capacity, the default numbers of logical cylinders and heads, and the number of logical sectors per track for
each product line.
Table 1-1
Capacity specification
Capacity
4 GB
8 GB
16 GB
32 GB
64 GB
Total Bytes*
4,011,614,208
8,012,390,400
16,013,942,784
32,017,047,552
64,023,257,088
Cylinders
7,773
15,525
16,383
16,383
16,383
Heads
16
16
16
16
16
Sectors
63
63
63
63
63
Max LBA*
7,835,184
15,649,200
31,277,232
62,533,296
125,045,424
*Display of total bytes varies from file systems.
**Cylinders, heads or sectors are not applicable for these capacities. Only LBA addressing applies.
LBA count addressed in the table above indicates total user storage capacity and will remain the same throughout the lifespan of
the device. However, the total usable capacity of the SSD is most likely to be less than the total physical capacity because a small
portion of the capacity is reserved for device maintenance usages.
1.5
Performance
Performance of SAFD25M4 is shown in Table 1-2.
Table 1-2
Performance specification
Capacity
Performance
Sustained Read
(MB/s)
Sustained Write
(MB/s)
4 GB
145
50
8 GB
155
105
16 GB
155
105
32 GB
160
145
64 GB
165
150
Note: Performance varies from flash configurations or host system settings.
4
© 2013 Apacer Technology Inc.
Rev. 1.5