AZ9481
16 AMP LOW PROFILE
POWER RELAY
FEATURES
•
•
•
•
•
•
•
•
•
High power switching (4000 VA)
High sensitivity, 128 mW / 256 mW pickup
Low profile (less than 11.4 mm height)
SPST (1 Form A) and SPDT (1 Form C)
UL Class F (155°C) standard
Epoxy sealed version available
DC coils up to 48 VDC
UL file E43203
TÜV certificate 50155384
GENERAL DATA
Life Expectancy
Mechanical
Electrical
Operate Time (typical)
Release Time (typical)
Minimum operations
1 x 10
7
1 x 10
5
at 10 A 250 VAC Res.
10 ms at nominal coil voltage
5 ms at nominal coil voltage
(with no coil suppression)
2500 Vrms coil to contact
1000 Vrms between open contacts
100 megaohms at 20°C, 500 VDC,
50% RH
Greater than 10% of nominal coil voltage
At nominal coil voltage
1 Form A: -40°C (-40°F) to 85°C (185°F)
1 Form C: -40°C (-40°F) to 70°C (158°F)
0.062” (1.5 mm) DA at 10-55 Hz
10 g
P.B.T. polyester
Tinned copper alloy, P.C.
270°C (518°F)
5 seconds
80°C (176°F)
30 seconds
8 grams
CONTACTS
Arrangement
Ratings
Standard
1 Form A
SPST (1 Form A)
SPDT (1 Form C)
Resistive load:
Max. switched power:
Max. switched current:
Max. switched voltage:
Max. switched power:
Max. switched current:
Max. switched voltage:
300 W or 2500 VA
10 A
30 VDC* or 250 VAC
300 W or 2500 VA
10 A
30 VDC* or 250 VAC
Dielectric Strength
(at sea level for 1 min.)
Insulation
Resistance
Dropout
Ambient Temperature
Operating
Vibration
Shock
1 Form C
Heavy Duty
1 Form A
Max. switched power:
Max. switched current:
Max. switched voltage:
* Note:
300 W or 4000 VA
16 A
30 VDC* or 250 VAC
If switching voltage is greater than 30 VDC,
special precautions must be taken.
Please contact the factory.
Enclosure
Terminals
Max. Solder Temp.
Rated Load
UL
Standard, 1 Form A
10 A at 250 VAC, resistive, 100k cycles [1][2]
10 A at 30 VDC, resistive, 100k cycles [1][2]
TV-5 [1]
Standard, 1 Form C
10 A at 250 VAC, resistive, 100k cycles (N.O.) [2]
10 A at 250 VAC, resistive, 30k cycles (N.O.) [3]
6 A at 250 VAC, resistive, 100k cycles (N.C.) [2][3]
Heavy Duty, 1 Form A
16 A at 125 VAC, resistive, 100K cycles [1][2]
10 A at 250 VAC, resistive, 100K cycles [1][2]
10 A at 30 VDC, resistive, 100k cycles [1][2]
0.3 A at 110 VDC, resistive, 50k cycles [1][2]
TV-5 [1]
Max. Solder Time
Max. Solvent Temp.
Max. Immersion Time
Weight
COIL
Power
At Pickup Voltage
128 mW (1 Form A)
(typical)
256 mW (1 Form C)
Max. Continuous
Disspiation
1.34 W at 20°C (68°F) ambient
TÜV
Heavy Duty, 1 Form A
16 A at 250 VAC, resistive, 50k cycles [1][2]
8 A at 250 VAC, cos phi 0.4, 50k cycles [1][2]
10 A at 30 VDC, resistive, 50k cycles [1][2]
Silver cadmium oxide [1], silver tin oxide [2],
silver nickel [3], gold plating available
< 100 milliohms initially
Temperature Rise
13°C (23°F) at nominal coil voltage (1 Form A)
24°C (43°F) at nominal coil voltage (1 Form C)
Temperature
Max. 155°C (333°F)
NOTES
1. All values at 20°C (68°F)
2. Relay may pull in with less than “Must Operate” value.
3. Specifications subject to change without notice.
Material
Resistance
ZETTLER electronics GmbH
Junkersstr. 3, D-82178 Puchheim, Germany
This product specification to be used only together with the application notes
which can be downloaded from http://www.ZETTLERelectronics.com/pdfs/relais/ApplicationNotes.pdf
-
A ZETTLER
GROUP
Company
phone: +49 89 800 97-0 office@ZETTLERelectronics.com
fax:
+49 89 800 97-200 www.ZETTLERelectronics.com
2014-06-26
AZ9481
RELAY ORDERING DATA
COIL SPECIFICATIONS SPST-NO (1 Form A)
Nominal Coil
VDC
5
6
9
12
18
24
48
Must Operate
VDC
4.0
4.8
7.2
9.6
14.4
19.2
38.4
Max. Continuous
VDC
12.9
15.5
23.3
31.0
46.6
62.0
124.0
Coil Resistance
Ohm ± 10%
125
180
405
720
1,620
2,880
11,520
ORDER NUMBER*
AZ9481-1A-5D
AZ9481-1A-6D
AZ9481-1A-9D
AZ9481-1A-12D
AZ9481-1A-18D
AZ9481-1A-24D
AZ9481-1A-48D
* “1A” denote silver cadmium oxide contacts.
Substitute “1AE” in place of “1A” for silver tin oxide contacts.
Add suffix “T” after “1A” or “1AE” for heavy duty version.
Add suffix “E” at the end of order number for sealed version.
Add suffix “A” at the end of order number for gold plated contacts.
COIL SPECIFICATIONS SPDT (1 Form C)
Nominal Coil
VDC
5
6
9
12
18
24
48
Must Operate
VDC
4.0
4.8
7.2
9.6
14.4
19.2
38.4
Max. Continuous
VDC
9.1
11.0
16.4
21.9
32.9
43.9
87.8
Coil Resistance
Ohm ± 10%
62.5
90
202.5
360
810
1,440
5,760
ORDER NUMBER*
AZ9481-1CE-5D
AZ9481-1CE-6D
AZ9481-1CE-9D
AZ9481-1CE-12D
AZ9481-1CE-18D
AZ9481-1CE-24D
AZ9481-1CE-48D
* “1CE” denote silver tin oxide contacts.
Substitute “1CB” in place of “1CE” for silver nickel contacts.
Add suffix “E” at the end of order number for sealed version.
Add suffix “A” at the end of order number for gold plated contacts.
ZETTLER electronics GmbH
Junkersstr. 3, D-82178 Puchheim, Germany
This product specification to be used only together with the application notes
which can be downloaded from http://www.ZETTLERelectronics.com/pdfs/relais/ApplicationNotes.pdf
-
A ZETTLER
GROUP
Company
phone: +49 89 800 97-0 office@ZETTLERelectronics.com
fax:
+49 89 800 97-200 www.ZETTLERelectronics.com
2014-06-26
ARM Technology
京公网安备 11010802033920号
EEWORLD
