AZ942H
16 AMP
MINIATURE
PC BOARD RELAY
FEATURES
•
•
•
•
•
•
•
•
Extremely low cost
16 Amp switching capacity
Proof tracking index (PTI/CTI) 250
Clearance and creepage distance >2.5 mm
Class F insulation (155 °C) available
Meets IEEE 587 6 kV lightning surge
UL, CUR file E44211
VDE file 40026048
GENERAL DATA
CONTACTS
Arrangement
Ratings
1 Form A
SPST (1 Form A)
SPDT (1 Form C)
Resistive load:
Max. switched power: 280 W or 4000 VA
Max. switched current: 16 A
Max. switched voltage: 150 VDC* or 300 VAC
Max. switched power: 196 W or 1939 VA
Max. switched current: 12 A
Max. switched voltage: 150 VDC* or 300 VAC
*
Note: If switching voltage is greater than 30 VDC,
Life Expectancy
Mechanical
Electrical
Minimum operations
1 x 10
7
1 x 10
5
at 10A 250 VAC Res.
Operate Time (typical)
10 ms at nominal coil voltage
Release Time (typical)
5 ms at nominal coil voltage
(with no coil suppression)
Dielectric Strength
3000 Vrms contact to coil
(at sea level for 1 min.)
1000 Vrms across contacts
Insulation Resistance
Insulation
(according to
DIN VDE 0110,
IEC 60664-1)
Dropout
Ambient Temperature
Operating
Vibration
Shock
Enclosure
Terminals
Max. Solder Temp.
Max. Solder Time
Max. Solvent Temp.
Max. Immersion Time
Weight
Packing unit in pcs
100 megohms min. at 20°C, 500 VDC,
50% RH
Overvoltage category: II
Pollution degree: 2
Nominal voltage: 250 VAC
Greater than 10% of nominal coil voltage
At nominal coil voltage
Class B: -40°C(-40°F) to 70°C(158°F)
Class F: -40°C(-40°F) to 85°C(185°F)
0.062" (1.5 mm) DA at 10–55Hz
10 g
P.B.T. polyester
Tinned copper alloy, P.C.
270°C (518°F)
5 seconds
80°C (176°F)
30 seconds
13 g
20 per plastic tube / 1000 per carton box
1 Form C
special precautions must be taken.
Please contact the factory.
Rated Load
UL
1 Form A
16 A at 250 VAC, resistive, 85°C, 50k cycles
12 A at 250 VAC, resistive, 85°C, 100k cycles
10 A at 277 VAC, resistive, 85°C, 25k cycles
10 A at 28 VDC, resistive, 85°C, 100k cycles
1 Form C
16 A at 125 VAC, resistive, 85°C, 50k cycles (N.O.)
12 A at 250 VAC, resistive, 85°C, 100k cycles (N.O.)
12 A at 125 VAC, resistive, 85°C, 100k cycles (N.O.)
12 A at 125 VAC, resistive, 85°C, 100k cycles (N.C.)
7 A at 277 VAC, resistive, 85°C, 100k cycles
7 A at 28 VDC, resistive, 85°C, 100k cycles
VDE
1 Form A
10 A at 250 VAC, resistive, 85°C, 50k cycles
1 Form C
10 A at 250 VAC, resistive, 85°C, 50k cycles (N.O.)
7 A at 250 VAC, resistive, 85°C, 50k cycles
COIL
Power
At Pickup Voltage
(typical)
Max. Continuous
Dissipation
Temperature Rise
Temperature
230 mW
Class B: 1.7 W at 20°C (68°F) ambient
Class F: 2.2 W at 20°C (68°F) ambient
26°C (47°F) at nominal coil voltage
Class B: Max. 130°C (221°F)
Class F: Max. 155°C (311°F)
Material
Resistance
Silver tin oxide
< 100 milliohms initially
NOTES
1. All values at 20°C (68°F)
2. Relay may pull in with less than “Must Operate” value.
3. Specifications subject to change without notice.
ZETTLER electronics GmbH
Junkersstr. 3, D-82178 Puchheim, Germany
This product specification to be used only together with the application notes
which can be downloaded from http://www.ZETTLERelectronics.com/pdfs/relais/ApplicationNotes.pdf
-
A ZETTLER
GROUP
Company
phone: +49 89 800 97-0 office@ZETTLERelectronics.com
fax:
+49 89 800 97-200 www.ZETTLERelectronics.com
2015-06-17
AZ942H
RELAY ORDERING DATA
STANDARD RELAYS
COIL SPECIFICATIONS
Nominal Coil
VDC
3
5
6
9
12
18
24
48
Must Operate
VDC
2.4
4.0
4.8
7.2
9.6
14.4
19.2
38.4
Max. Continuous
VDC
6.5
11.0
13.0
20.0
26.0
39.0
52.0
104.0
Coil Resistance
Ohm ± 10%
25
70
100
225
400
900
1,600
6,200
ORDER NUMBER*
Form A
(SPST-N.O.)
AZ942H–1A–3DT(H)
AZ942H–1A–5DT(H)
AZ942H–1A–6DT(H)
AZ942H–1A–9DT(H)
AZ942H–1A–12DT(H)
AZ942H–1A–18DT(H)
AZ942H–1A–24DT(H)
AZ942H–1A–48DT(H)
Form C
(SPDT)
AZ942H–1C–3DT(H)
AZ942H–1C–5DT(H)
AZ942H–1C–6DT(H)
AZ942H–1C–9DT(H)
AZ942H–1C–12DT(H)
AZ942H–1C–18DT(H)
AZ942H–1C–24DT(H)
AZ942H–1C–48DT(H)
* Substitute “DET(H)” in place of “DT(H)” for epoxy sealed versions. To indicate Class F version, add suffix “F” before “(H)”.
Please notice: Additional letter “H” at the end of order number for PTI/CTI 250 version will be changed to “(H)” for all relays produced after 2011-04-26.
IEEE STANDARD 587-1980 (ANSI/IEEE C62.41-1980)
SURGE VOLTAGE WITHSTAND RATING
Test
1.2 x 50 usec positive pulse
1.2 X 50 usec negative pulse
0.5 us 100 kHz ring wave
Rating
6 kV
6 kV
6 kV
Description
Contact to coil – 5 pulses
Contact to coil – 5 pulses
Contact to coil - 5 waves
MECHANICAL DATA
PC BOARD LAYOUT
.87
[22.0]
.64
[16.3]
.082
[2.1]
.085
[2.15]
.236
[6.0]
.65
[16.5]
.138
[3.5]
.472
[12.0]
.016
[0.4]
.078
[2.0]
.480
[12.2]
5 x
ø
.051
[
ø
1.3]
VIEWED TOWARDS TERMINALS
.016
[0.4]
4 x .020
[0.5]
WIRING DIAGRAMS
.040
[1.0]
4 x .036
[0.9]
FORM A
FORM C
VIEWED TOWARDS TERMINALS
Dimensions in inches with metric equivalents in parentheses. Tolerance: ±0.010"
ZETTLER electronics GmbH
Junkersstr. 3, D-82178 Puchheim, Germany
This product specification to be used only together with the application notes
which can be downloaded from http://www.ZETTLERelectronics.com/pdfs/relais/ApplicationNotes.pdf
-
A ZETTLER
GROUP
Company
phone: +49 89 800 97-0 office@ZETTLERelectronics.com
fax:
+49 89 800 97-200 www.ZETTLERelectronics.com
2015-06-17
京公网安备 11010802033920号
EEWORLD
