XCC722122000J

For STM32, there are two ways to reset the software:   1) Use the official software library     The system reset function is directly provided in the stm32f10x_nvic.c file of the official software li...[Details]

1. About FPU transplantation As long as the chip has FPU function, the use of FPU is generally enabled by default. You can also select it in the Options tab;  2. About the transplantation of DSP li...[Details]

background After the hardware engineer completed the PCB and schematic design, the routine was modified according to the tutorial of Zhengdian Atom to verify the correctness of the hardware.  STM32F...[Details]

Overview Lightning is a strong discharge phenomenon that occurs between thunderstorm clouds and between thunderstorm clouds and the earth due to severe convective weather. Lightning is gen...[Details]

In 2018, the National Development and Reform Commission issued a new photovoltaic subsidy policy. The benchmark on-grid electricity price was significantly reduced, the return on investment decreased,...[Details]

When STM32 uses JTMS (PA13) and JTCK (PA14) as normal I/O ports, add the following code before initialization (the order cannot be reversed):   RCC_APB2PeriphClockCmd(RCC_APB2Periph_AFIO, ENABLE); G...[Details]

1) ADC multi-channel acquisition: (Multi-channel acquisition must use scanning mode. In scanning mode, the channels of the rule group share a register, so DMA transmission must be used; to prevent da...[Details]

In the packaging process of a production line, every time the conveyor belt of the production line delivers a product to the packaging machine, the "SP" terminal outputs a pulse to the T1 terminal of...[Details]

//Environment: winavr+avr studio   char temp=0; ISR(TIMER1_COMPA_vect )//interrupt function {     // user code here     temp++;     if (temp==10)     temp=0;     PORTA=temp;     DDRA=0xff; } void ...[Details]

International Solar Photovoltaic Network News: On November 21, Australia's SMA Solar Technology Co., Ltd. signed a contract with the local government to provide photovoltaic inverters with an insta...[Details]

　　The STC12C5412AD microcontroller is an enhanced 8051 standard 51 series microcontroller. It is 12 times faster than the ordinary 8051 and can be programmed on a home computer without an emulator. 　...[Details]

#include  MSP430x12x2.h   #define TEM_ADC_CHL 0x0a  void InitSys(void);  void Read_ADC(unsigned int INCH_channel);  void ADC_TO_TEM(void); unsigned int ADC_sample_val;  unsigned int long temp1,temp2;...[Details]

MSP430 uses ADC10 to measure the voltage of the temperature diode inside the chip #include "msp430x22x4.h"  //This program uses ADC10 to measure the voltage of the temperature diode inside the chip  ...[Details]

An example of Samsung S3C/S3P/S3F9XXX series MCU implementing table lookup operation               ; to implement table lookup operation, you must first define the table address, there are two ways t...[Details]

5.1. Usage of EM78 series 8-bit microcontroller special instructions 5.1.1. Table Lookup Instructions and Usage The EM78 series 8-bit microcontroller uses three steps to look up the table: (1) "call"...[Details]