BU-65178G0-391S datasheet, PDF

Datasheet> All Categories > The embedded processor and controller> Microcontrollers and processors> BU-65178G0-391S

BU-65178G0-391S: DescriptionMil-Std-1553 Controller, 2 Channel(s), 0.125MBps, CMOS, CQFP72, 1 X 1 INCH, 0.155 INCH HEIGHT, CERAMIC, QFP-72; CategoryThe embedded processor and controller Microcontrollers and processors; File Size1MB，15 Pages; ManufacturerData Device Corporation

Download Datasheet Parametric View All

BU-65178G0-391S Overview

Mil-Std-1553 Controller, 2 Channel(s), 0.125MBps, CMOS, CQFP72, 1 X 1 INCH, 0.155 INCH HEIGHT, CERAMIC, QFP-72

BU-65178G0-391S Parametric

Parameter Name	Attribute value
Maker	Data Device Corporation
package instruction	QFP,
Reach Compliance Code	compliant
Address bus width	16
boundary scan	NO
letter of agreement	MIL STD 1553A; MIL STD 1553B; STANAG-3838
Data encoding/decoding methods	BIPH-LEVEL(MANCHESTER)
Maximum data transfer rate	0.125 MBps
External data bus width	16
JESD-30 code	S-CQFP-G72
length	25.4 mm
low power mode	NO
Number of serial I/Os	2
Number of terminals	72
Maximum operating temperature	70 °C
Minimum operating temperature
Package body material	CERAMIC, METAL-SEALED COFIRED
encapsulated code	QFP
Package shape	SQUARE
Package form	FLATPACK
Maximum seat height	3.615 mm
Maximum supply voltage	5.5 V
Minimum supply voltage	4.5 V
Nominal supply voltage	5 V
surface mount	YES
technology	CMOS
Temperature level	COMMERCIAL
Terminal form	GULL WING
Terminal pitch	1.27 mm
Terminal location	QUAD
width	25.4 mm
uPs/uCs/peripheral integrated circuit type	SERIAL IO/COMMUNICATION CONTROLLER, MIL-STD-1553

Preview

Download Datasheet

View All

BU-65178/65179*/61588/61688*/61689*

MINIATURE ADVANCED

COMMUNICATION ENGINE

(MINI-ACE®) AND MINI-ACE PLUS*

Make sure the next

Card you purchase

has...

FEATURES

•

5 Volt Only

•

Fully Integrated MIL-STD-1553 A/B

STANAG 3838 Compliant Terminals

•

One-Square-Inch Package

•

Smallest BC/RT/MT In The Industry

•

Hardware and Software Compatible

with BU-61580 ACE Series

•

Flexible Processor/Memory Interface

•

Bootable RT* Option

•

4K x 16 or 64K x 16* Shared RAM

•

Automatic BC Retries

•

Programmable BC Gap Times

DESCRIPTION

The BU-61588 Mini-ACE and BU-61688 Mini-ACE Plus* integrates two

5-volt-only transceivers, protocol, memory management, processor interface

logic, and 4K x 16, or 64K x 16* words of RAM in a choice of pin grid array

(PGA), quad flat pack or gull lead packages. The Mini-ACE is packaged in a

1.0 square inch, low profile, cofired ceramic multi-chip-module (MCM) pack-

age making it the smallest integrated MIL-STD-1553 BC/RT/MT in the indus-

try.

The Mini-ACE provides full compatibility to DDC’s BU-61580 and BU-65170

Advanced Communication Engine (ACE). As such, the Mini-ACE includes all

the hardware and software architectural features of the ACE.

The Mini-ACE contains internal address latches and bidirectional data buffers

to provide a direct interface to a host processor bus. The memory manage-

ment scheme for RT mode provides three data structures for buffering data.

These structures, combined with the Mini-ACE’s extensive interrupt capabil-

ity, serve to ensure data consistency while off-loading the host processor.

The Mini-ACE Plus* can optionally boot-up as a RT with the Busy bit set for

1760 applications. The Mini-ACE BC mode implements several features

aimed at providing an efficient real-time software interface to the host proces-

sor including automatic retries, programmable intermessage gap times, auto-

matic frame repetition, and flexible interrupt generation.

The advanced architectural features of the Mini-ACE, combined with its small

size and high reliability, make it an ideal choice for demanding military and indus-

trial processor-to-1553 applications.

•

Programmable Illegalization

•

Simultaneous RT/Monitor Mode

•

Operates From 10*/12 /16 / 20* MHz

Clock

FOR MORE INFORMATION CONTACT:

Data Device Corporation

105 Wilbur Place

Bohemia, New York 11716

631-567-5600 Fax: 631-567-7358

www.ddc-web.com

Technical Support:

1-800-DDC-5757 ext. 7677 or 7381

7771

All trademarks are the property of their respective owners.

1998, 1999 Data Device Corporation

Recommended Resources

Fuse blown sound and light alarm circuit 3

Motor sequential starting and individual stopping control circuit a

Battery low voltage detector circuit diagram

Traffic light AC flasher

STK461 power amplifier circuit

5v regulated power supply circuit with over-cut protection

Regarding the issue of nios, please give me some advice: The following problem occurs when using Nios: No Nios II target connection paths were located. Check connections and that a Nios II .sof is downloaded. Click refresh connection, but nothing happens? ?...; wanyi223 FPGA/CPLD

Ask: 1 warning of timing analysis warning: Question: 1 warning of timing analysis warning [table][tr][td] When doing timing analysis, only one path does not meet the requirement: -0.044 ns 99.56 MHz (period = 10.044 ns) . . . . . . . If I add ...; psd0208 FPGA/CPLD

Computer USB 3.0 interface hardware circuit design: USB is a serial bus standard for computer systems and external devices, supporting plug-and-play and hot-swap functions. It is commonly used for mobile peripherals such as USB flash drives and mice. U...; Jacktang Analogue and Mixed Signal

How to design an antenna PCB using Protel 99SE: I need help from all the experts. My tutor asked me to use Protel 99SE to design a schematic diagram of a patch antenna. What I want to ask is, do I need to draw the schematic diagram directly on this...; zhezhe0192 PCB Design

EK-LM4F120XL ADC reference voltage problem: In EK-LM4F120XL Launchpad, I use AIN0 (PE3 port) to sample 1.3V voltage, AIN1 (PE2 port) to sample 0.65V voltage, AIN8 (PE5 port) to sample 1.95V voltage, AIN9 (PE4 port) to sample 2.6V voltage. If 3....; fengzhidianzi Microcontroller MCU

Talk about the key points of antenna soldering: :) [b]The key points of soldering can be summarized as follows: [/b] 1. Before using a soldering iron (including a fire soldering iron), the surface of the soldering iron tip must be covered with a la...; xtss RF/Wirelessly

Shortcut: S0 S1 S2 S3 S4 S5 S6 S7 S8 S9 SA SB SC SD SE SF SG SH SI SJ SK SL SM SN SO SP SQ SR SS ST SU SV SW SX SY SZ T0 T1 T2 T3 T4 T5 T6 T7 T8 T9 TA TB TC TD TE TF TG TH TI TJ TK TL TM TN TO TP TQ TR TS TT TU TV TW TX TY TZ U0 U1 U2 U3 U4 U6 U7 U8 UA UB UC UD UE UF UG UH UI UJ UK UL UM UN UP UQ UR US UT UU UV UW UX UZ V0 V1 V2 V3 V4 V5 V6 V7 V8 V9 VA VB VC VD VE VF VG VH VI VJ VK VL VM VN VO VP VQ VR VS VT VU VV VW VX VY VZ W0 W1 W2 W3 W4 W5 W6 W7 W8 W9 WA WB WC WD WE WF WG WH WI WJ WK WL WM WN WO WP WR WS WT WU WV WW WY X0 X1 X2 X3 X4 X5 X7 X8 X9 XA XB XC XD XE XF XG XH XK XL XM XN XO XP XQ XR XS XT XU XV XW XX XY XZ Y0 Y1 Y2 Y4 Y5 Y6 Y9 YA YB YC YD YE YF YG YH YK YL YM YN YP YQ YR YS YT YX Z0 Z1 Z2 Z3 Z4 Z5 Z6 Z8 ZA ZB ZC ZD ZE ZF ZG ZH ZJ ZL ZM ZN ZP ZR ZS ZT ZU ZV ZW ZX ZY

Popular Components