302075-7Z12R300BB datasheet, PDF

Datasheet> All Categories > Passive components> The resistor> 302075-7Z12R300BB

302075-7Z12R300BB: DescriptionFixed Resistor, Metal Foil, 1.75W, 12.3ohm, 600V, 0.1% +/-Tol, -.2,.2ppm/Cel,; CategoryPassive components The resistor; File Size456KB，6 Pages; ManufacturerVishay; Websitehttp://www.vishay.com

Download Datasheet Parametric View All

302075-7Z12R300BB Overview

Fixed Resistor, Metal Foil, 1.75W, 12.3ohm, 600V, 0.1% +/-Tol, -.2,.2ppm/Cel,

302075-7Z12R300BB Parametric

Parameter Name	Attribute value
Is it Rohs certified?	incompatible
Maker	Vishay
Reach Compliance Code	unknown
structure	Hermetically Sealed
JESD-609 code	e0
Lead diameter	0.64 mm
Lead length	25.4 mm
Number of terminals	4
Maximum operating temperature	125 °C
Minimum operating temperature	-55 °C
Package diameter	12.7 mm
Package length	38.1 mm
Package form	4 Terminals
method of packing	Bulk
Rated power dissipation(P)	1.75 W
resistance	12.3 Ω
Resistor type	FIXED RESISTOR
series	HZ SERIES-OTHER
technology	METAL FOIL
Temperature Coefficient	-.2,.2 ppm/°C
Terminal surface	Tin/Lead (Sn/Pb)
Tolerance	0.1%
Operating Voltage	600 V

Preview

Download Datasheet

View All

HZ Series (Z-Foil) with Zero TCR

Vishay Foil Resistors

New Generation of Secondary Standards Hermetically Sealed Construction Ultra High

Precision Z-Foil Technology Resistors with TCR of ± 0.2 ppm/°C, Tolerance of ± 0.001 %

and Load Life Stability of ± 0.002 % (Metrology, Laboratory, Instrumentation, Industrial)

FEATURES



Temperature coefficient of resistance (TCR):

± 0.2 ppm/°C typical (- 55 °C to + 125 °C,

+ 25 °C ref.). For ultra high performances

(instrumentation and metrology) please refer to

the last page



Resistance range: 5



to 1.1 M (higher or lower values of

resistance available)



Foil resistors are not restricted to standard values; specific

“as required” values can be supplied at no extra cost or

delivery (e.g. 1K2345 vs. 1K)



Power coefficient “R due to self heating”:

5 ppm at rated power with the Z-Foil technology



Tolerance:

to ± 0.001 % (10 ppm)



Load life stability to ± 0.002 % (20 ppm) at 25 °C, 2000 h

at rated power



Load life stability, can be considerably improved

through in-house stabilization



Shelf life stability: 2 ppm for at least 6 years

(unaffected by humidity)



Electrostatic discharge (ESD) up to 25 000 V



Power rating: 0.3 W to 2.5 W at + 25 °C (depending on

model - see table 2)



Non-inductive, non-capacitive design



Non hot spot design



Rise time: 1 ns effectively no ringing



Current noise: 0.010 µV

RMS

/V of applied voltage (< - 40 dB)



Thermal EMF: 0.05 µV/°C typical



Voltage coefficient: < 0.1 ppm/V



Thermal stabilization time < 1 s (nominal value achieved

within 10 ppm of steady state value)



Non-inductive: < 0.08 µH



Terminal finish available: lead (Pb)-free or tin/lead alloy



Impervious to harmful environments - oil filled



Prototype quantities available in just 5 working days

or sooner. For more information, please contact

foil@vishaypg.com



For better performances (values, TCR, tolerance, stability),

please contact us

INTRODUCTION

The Z-Foil based oil filled, hermetically sealed HZ Series

resistors represent an industry breakthrough. The hermetic

sealing eliminates the ingress of moisture and oxygen, while

the oil acts as a thermal conductor, thus eliminating

long-term degradation elements of unsealed resistors, while

at the same time allowing the device to accept short periods

of overload without degradation.

The Z-Foil technology provides a significant reduction of the

resistive components, sensitivity to ambient temperature

variations (TCR) and applied power changes (PCR). When

combined with the hermetic sealing and oil filling, the

HZ Series resistors become

the most precise and stable

resistors available.

They are used as the most precise

secondary standards for ultra precision metrology.

With accuracies of ± 0.001 % (10 ppm) and a resistance

range from 5



to 1.1 M and long term shelf life of less than

2 ppm, these devices are virtually secondary standards that

can be carried in sets for daily or periodic calibration of

factory measurement equipment.

The HZ Series is available with laboratory and metrology

level precision and long-term stability with additional

in-house oriented processes such as: chip stabilization,

special TCR plotting, additional treatments for ultra

stability and special post manufacturing operations

(PMO). (Please refer to the last page)

TABLE 1 - TCR VS. RESISTANCE VALUE

RESISTANCE VALUE

()

TYPICAL TCR AND

MAX. SPREAD

(- 55 °C to + 125 °C, + 25 °C ref.)

(ppm/°C)

± 0.2 ± 2

± 0.2 ± 3

± 0.2 ± 4

FIGURE 1 - SHELF LIFE - VHA518-11

12K9 VS. QHE

0.9

0.8

0.7

0.6

0.5

0.4

0.3

0.2

0.1

- 0.1

100 200 300 400 500 600 700 800 900 1000

100 to < 1M1

50 to < 100

5 to < 50

Note

• For maximum TCR < 1 ppm/°C, see VHP100 and contact

application engineering

Resistance Change (ppm)

Time (Days)

Document Number: 63120

Revision: 25-Mar-10

For any questions, contact:

foil@vishaypg.com

www.foilresistors.com

Recommended Resources

Fixed frequency discontinuous mode power factor correction circuit

Wireless "Walkman" receiver circuit

Narrow pulse trigger one-way circuit

monkey climbing rope circuit

battery charge regulator

Rice cooker fire power controller circuit

Do what you want. Atmel classroom helps you evolve your technology!: [align=center][b][size=5][color=#00bfff]Do what you want Atmel classroom helps you evolve technology[/color][/size][/b][/align] [align=left][size=14px] [/size][size=3]In EEWORLD University's [url=http...; DreamerJane Microchip MCU

Answers to various questions about network cameras: Keywords: [b]Network Camera[/b] 1. What is a network camera? Answer: A network integrated management and image storage for remote monitoring through the Internet at a remote location where a [url=http...; yucooxfj Industrial Control Electronics

LED display brightness control method: There are two ways to control the brightness of LEDs. One is to change the current flowing through the LED. Generally, the continuous working current allowed by LED tubes is about 20 mA. Except for th...; 探路者 LED Zone

Can the parallel port expanded by the pci slot be used to download the test version of the microcontroller: Can the parallel port expanded by the PCI slot be used to download the microcontroller test version? As the title says! I bought a microcontroller test version, 89s52, and used a parallel port downloa...; colorcharge Embedded System

[New version of Zhongke Bluexun AB32VG1 RISC-V development board] - 3: Default Blink, strange reaction.: [i=s]This post was last edited by MianQi on 2021-8-12 09:44[/i]Default code in a new project in "RT-Thread Studio": #include rtthread.h #include "board.h"int main(void) {uint8_t pin = rt_pin_get("PE.1...; MianQi Domestic Chip Exchange

Urgent!!!!!!!!!!! ISP cannot read ID: I have a Zhou Ligong 2132 arm7 board. Today I am doing a GPIO output experiment - single-channel LCD control. I am using LPC2000 Flash Utility 2.2.1 (philips), but I cannot read the ID. What is going ...; qianrj Embedded System

Shortcut: A0 A1 A2 A3 A4 A5 A6 A7 A8 A9 AA AB AC AD AE AF AG AH AI AJ AK AL AM AN AO AP AQ AR AS AT AU AV AW AX AY AZ B0 B1 B2 B3 B4 B5 B6 B7 B8 B9 BA BB BC BD BE BF BG BH BI BJ BK BL BM BN BO BP BQ BR BS BT BU BV BW BX BY BZ C0 C1 C2 C3 C4 C5 C6 C7 C8 C9 CA CB CC CD CE CF CG CH CI CJ CK CL CM CN CO CP CQ CR CS CT CU CV CW CX CY CZ D0 D1 D2 D3 D4 D5 D6 D7 D8 D9 DA DB DC DD DE DF DG DH DI DJ DK DL DM DN DO DP DQ DR DS DT DU DV DW DX DZ

Popular Components