The MADL-011008 is a silicon PIN limiter with small
I-region length specifically designed for medium
signal applications. The limiter is available in a
lead-free 1.2 x 1.5 mm 6-lead PDFN package. The
limiter is ideally designed to provide low insertion
loss, at zero bias, as well as low flat leakage power
with fast signal response/recovery times.
Pin Configuration
Pin No.
Pin Name
N/C
GND
N/C
N/C
IN
N/C
Pad
Description
No Connection
RF Ground
No Connection
No Connection
RF Input
No Connection
GND
The MADL-011008 PIN limiter is designed for use in
passive limiter control circuits to protect sensitive
receiver components such as low noise amplifiers
(LNA), detectors, and mixers.
1
2
3
4
Ordering Information
1,2
Part Number
MADL-011008-141200
MADL-011008-14120T
MADL-011008-001SMB
Package
Bulk Packaging
Tape and Reel
Sample Test Board
5
6
7
3
3. The exposed pad centered on the package bottom must be
connected to RF and DC ground.
1. Reference Application Note M513 for reel size information.
2. All sample boards include 5 loose pieces.
Handling Procedures
Please observe the following precautions to avoid
damage:
Static Sensitivity
Silicon Integrated Circuits are sensitive to
electrostatic discharge (ESD) and can be damaged
by static electricity. Proper ESD control techniques
should be used when handling these devices.
* Restrictions on Hazardous Substances, European Union Directive 2002/95/EC.
1
M/A-COM Technology Solutions Inc. and its affiliates reserve the right to make changes to the product(s) or information contained herein without notice.
Visit www.macom.com for additional data sheets and product information.
•
North America
Tel: 800.366.2266 / Fax: 978.366.2266
•
Europe
Tel: 44.1908.574.200 / Fax: 44.1908.574.300
•
Asia/Pacific
Tel: 81.44.844.8296 / Fax: 81.44.844.8298
MADL-011008
PIN Diode Limiter
50 MHz - 4 GHz
Electrical Specifications: Freq 2.7 to 3.0 GHz, T
A
= 25°C, Z
0
= 50
Ω
Parameter
Insertion Loss
Input Return Loss
Output Return Loss
P1dB
Peak Incident Power
CW Incident Power
CW Flat Leakage
Recovery Time
Test Conditions
0 dBm
0 dBm
0 dBm
—
Pulse Width 1 µSec, Duty Cycle 0.1%
—
Incident Power = +24 dBm
To within 1 dB of final insertion loss
Peak Incident Power = +30 dBm
Pulse Width 1 µSec, Duty Cycle 0.1%
+30 dBm Pin,
Pulse Width 1 µSec, Duty Cycle 0.1%
Pin -5 dBm/tone, 10 MHz Spacing
Pin -5 dBm/tone
Forward current = 10 mA
Reverse voltage = 20 volts
Units
dB
dB
dB
dBm
dBm
dBm
dBm
ns
Min.
—
—
—
—
—
—
—
—
Typ.
0.15
20
20
10
40
30
16
50
Max.
—
—
—
—
—
—
—
—
Rev. V1
Spike Leakage
IP3
IP2
Forward Voltage
Reverse Current
erg
dBm
dBm
V
µA
—
—
—
—
—
0.5
30
43
0.9
0.1
—
—
—
1.1
10
Absolute Maximum Ratings
4,5
Parameter
Peak Incident Power
Pulse Width 1 µSec, Duty Cycle 0.1%
CW Incident Power
Operating Temperature
Storage Temperature
Absolute
Maximum
43 dBm
33 dBm
-40°C to +85°C
-65°C to +150°C
Application Schematic
4. Exceeding any one or combination of these limits may cause
permanent damage to this device.
5. M/A-COM Technology Solutions does not recommend
sustained operation near these survivability limits.
Recommended Board Layout
Parts List
Component
C1 - C2
L1
2
M/A-COM Technology Solutions Inc. and its affiliates reserve the right to make changes to the product(s) or information contained herein without notice.
Visit www.macom.com for additional data sheets and product information.
•
North America
Tel: 800.366.2266 / Fax: 978.366.2266
•
Europe
Tel: 44.1908.574.200 / Fax: 44.1908.574.300
•
Asia/Pacific
Tel: 81.44.844.8296 / Fax: 81.44.844.8298
Value
68 pF
5.1 nH
Package
0402
0402
MADL-011008
PIN Diode Limiter
50 MHz - 4 GHz
Typical Performance Curves
Insertion Loss
0.0
Rev. V1
Pin vs. Pout @ 2.85 GHz
20
-0.1
15
+25°C
-40°C
+85°C
-0.2
+25°C
-40°C
+85°C
10
-0.3
5
-0.4
2.70
0
2.75
2.80
2.85
2.90
2.95
3.00
0
5
10
15
20
25
30
Frequency (GHz)
Input Power (dBm)
Input Return loss
-10
+25°C
-40°C
+85°C
Output Return Loss
-10
-15
-15
+25°C
-40°C
+85°C
-20
-20
-25
-25
-30
2.70
2.75
2.80
2.85
2.90
2.95
3.00
-30
2.70
2.75
2.80
2.85
2.90
2.95
3.00
Frequency (GHz)
Frequency (GHz)
3
M/A-COM Technology Solutions Inc. and its affiliates reserve the right to make changes to the product(s) or information contained herein without notice.
Visit www.macom.com for additional data sheets and product information.
•
North America
Tel: 800.366.2266 / Fax: 978.366.2266
•
Europe
Tel: 44.1908.574.200 / Fax: 44.1908.574.300
•
Asia/Pacific
Tel: 81.44.844.8296 / Fax: 81.44.844.8298
MADL-011008
PIN Diode Limiter
50 MHz - 4 GHz
Lead-Free
1.2 x 1.5 mm 6-Lead PDFN
†
Rev. V1
†
Reference Application Note M538 for lead-free solder reflow recommendations.
M/A-COM Technology Solutions Inc. and its affiliates reserve the right to make changes to the product(s) or information contained herein without notice.
Visit www.macom.com for additional data sheets and product information.
1. I am a computer science graduate who has been using VC++ to write programs. 2. I know nothing about circuits, but I know a little bit about Protel DXP. 3. I want to use a NEC microcontroller to mak...
[size=5][b][font=微软雅黑][color=RoyalBlue]Solution Overview: [/color][/font][/b][/size] [font=微软雅黑][b]· Application Value: [/b]Energy consumption is a universal problem facing the world, and many industr...
Source: Technology Golden Eye
This article is excerpted from the latest publication "China Science and Technology Hotspot Review 2019" (Science Press, July 2020). In order to avoid misinterpreting t...
[align=left][b][font=宋体][size=15pt]Making an SD card for the boot system[/font][/size][/font][/b][/align][align=left]Note: The purpose of making an SD card for booting is to enable the CPU[/font][font...
I use PB4.2. Every time I select our BSP and create a new project, there is a warning as follows (in bold). If I build PlatForm directly without adding any components, there will always be 3 errors. T...
[i=s]This post was last edited by Muziyu on 2014-12-5 15:21[/i] [size=5]Today I made up my mind and carefully reviewed the Open1081 user manual.pdf again and found an error. [/size][size=5]The data sh...
Hardware designers have begun to adopt FPGA technology in high-performance DSP designs because it can provide 10-100 times faster computing than PC-based or microcontroller-based solutions. Previou...[Details]
When the WDP500-2A plane grating monochromator is used to test the emission wavelength of a high-power laser diode at different currents, the matching of the laser diode has the disadvantages of lo...[Details]
In public places such as schools, government agencies, factories and mines, as well as public corridors in residential areas, the phenomenon of long-burning lights is very common, which causes a h...[Details]
To differentiate their products in a crowded and competitive market, manufacturers of handheld devices often consider battery life and power management as key selling points for cell phones, PDAs, ...[Details]
July 11, 2012, Beijing - Altera Corporation (NASDAQ: ALTR) today announced the launch of 40-Gbps Ethernet (40GbE) and 100-Gbps Ethernet (100GbE) intellectual property (IP) core products. These core...[Details]
0 Introduction
With the rise and continuous improvement of the solid-state lighting industry, light-emitting diodes (LEDs) have become an alternative lighting technology and are gr...[Details]
In the single-chip microcomputer system, in addition to display devices, sound devices are often used, and the most common sound device is the buzzer. Buzzers are generally used for some low-demand...[Details]
The concept of state machine
State machine is an important concept in software programming. More important than this concept is its flexible application. In a clear and efficient program, ther...[Details]
Since the late 1990s, with the demand for higher system efficiency and lower power consumption, the technological update of telecommunications and data communication equipment has promoted the deve...[Details]
Rated capacity refers to the maximum output power of the UPS (the product of voltage V and current A).
Usually, the UPS power supplies sold on the market are marked with "W" (watt) for smaller...[Details]
The power consumption of a switching power supply includes fixed losses caused by parasitic resistances such as semiconductor switches, magnetic components, and wiring, as well as switching losses ...[Details]
In recent years, with the increasing maturity of LED technology, LED light sources have been increasingly widely used due to their advantages of using low-voltage power supply, low energy consumpti...[Details]
HL201A is a special thick film driver integrated circuit with a capacity of less than 75AGTR developed by Xi'an Power Electronics Technology Research Institute. The article explains the pin arrange...[Details]
introduction
The Steyr diesel engine produced by Weifang Diesel Engine Factory has huge power and is one of the main power models widely used in China's heavy machinery and large trucks. In ...[Details]
1. Project Introduction
Beijing Benz-Daimler Chrysler Co., Ltd. is a joint venture between Beijing BAIC Group and Benz-Daimler Chrysler. In October 2005, it started to build a new automobile ...[Details]
Embedded System
京公网安备 11010802033920号
EEWORLD
