SEALED, ILLUMINATED ROCKER SWITCHES
LOW COST, SNAP-IN ROCKER FOR WET & DUSTY ENVIRONMENTS
K1/K2
SNAP-IN
ROCKERS
The K series rockers are rugged, high performance sealed
switches designed for use under severe conditions found in
marine, appliance, heavy equipment and industrial control
applications. Sealed to IP68S with an optional panel gasket
available.
The K1 series is offered in single pole configuration while the
K2 series is available in single and double pole configurations.
Both series offer illuminated models. Illumination can be
independent or dependent of the switch position or a
combination of both. A choice of red, green, clear or amber
colored lenses are offered in illuminated models. Illumination
options include incandescent, LED or neon light sources.
Mounting is simple and quick; snaps into panel from the
front. The OTTO snap-in design supports a variety of panel
thicknesses with just one cutout size specified.
A choice of models are offered to handle power levels to 16 amps,
1/2 HP and low level electronic switching applications.
OTTO can provide custom colors upon request. Value-added
assemblies with wire leads are also available. Please consult
the factory for assistance.
ROCKER SWITCHES
K1 Series
Single Pole
K2 Series
Single & Double Pole
C
Features:
• Withstands direct water spray
• Watertight to IP68S
• Fits industry standard panel openings for drop-in
replacement of panel sealed & unsealed switches
• Snap-in feature accommodates a wide range of
panel cutouts
• Switches up to 16 amps
• UV & solvent resistant
• Withstands extreme shock & vibration
• Custom legends available
• 2 & 3-position, momentary & maintained action
• Incandescent, LED & neon illumination with
independent & dependent light source options
• UL recognized & CSA certified
• Ignition protected
• RoHS/WEEE/Reach compliant
Standard Characteristics/Ratings:
ELECTRICAL RATINGS:
Load
Resistive
Resistive
Inductive
Lamp
Motor
DWV
Low Level
Electrical Life:
Sea Level @ 28VDC
or 125/250VAC, 60Hz
16A
10A
10A
5A
0.5HP
10mA @ 30mV
See Rating Chart
Cycles
25,000
50,000
25,000
25,000
25,000
®
US
1050Vrms except across light terminals
LIGHTING:
Light Source
Incandescent
Neon
LED
Mechanical Life:
Seal:
Rating
(VDC) 6V, 12V, 24V
(VAC) 125V, 250V
(VDC) 2V, 6V, 12V, 24V
100,000 cycles
IP68S
Operating Temp Range:
-30°C to +85°C
MATERIALS:
Case:
Button:
Base:
Terminals/Contact:
Terminal Hardware:
Thermoplastic
Thermoplastic
Thermoplastic
Brass, silver alloy with silver plate, gold flash for low level
Screws and lockwashers provided when applicable
K1/K2 series recommended Quick Connect terminals:
AMP 60253-2 for 12-16 AWG
AMP 42100-2 for 14-18 AWG
None provided
Mounting Hardware:
Specifications Subject To Change Without Notice
www.ottoexcellence.com
147
K1
SNAP-IN
ROCKERS
SEALED, ILLUMINATED ROCKER SWITCHES
LOW COST, SNAP-IN ROCKER FOR WET & DUSTY ENVIRONMENTS
K1 PART NUMBER CODE
K1
Terminal Style/
Switch Rating
A.
Q.C./Std.
B.
Screw/Std.
C.
Solder/Std.
D.
Q.C./Low Level
E.
Screw/Low Level
F.
Solder/Low Level
G.
PC Pin/Std.
H.
PC Pin/Low Level
X
X
X
Switch Action/Circuit
Position Position Position Circuit
“A”
“B”
“C”
A.
B.
C.
D.
E.
F.
G.
H.
Part Number Code Continued Below
X
Actuator Color/Style
A.
Red/Rocker
B.
Black/Rocker
C.
White/Rocker
D.
Red/Paddle
E.
Black/Paddle
F.
White/Paddle
G.
Red/Rocker Pinned
H.
Black/Rocker Pinned
J.
White/Rocker Pinned
K.
Red/Short Paddle Pinned
L.
Black/Short Paddle Pinned
M.
White/Short Paddle Pinned
N.
Red/Standard Paddle Pinned
P.
Black/Standard Paddle Pinned
R.
White/Standard Paddle Pinned
T.
Red/Short Paddle
U.
Black/Short Paddle
V.
White/Short Paddle
Light Type
A.
No Light
B.
6V Incandescent
C.
12V Incandescent
D.
24V Incandescent
E.
125VAC Neon
F.
250VAC Neon
G.
2V Red LED
H.
2V Green LED
J.
2V Amber LED
K.
6V Red LED
L.
6V Green LED
M.
6V Amber LED
N.
12V Red LED
P.
12V Green LED
Q.
12V Amber LED
R.
24V Red LED
S.
24V Green LED
T.
24V Amber LED
1-C
1-C
(1-C)
(
1-C)
(1-C)
1-C
(1-C)
OFF
Position “A”
NONE
NONE
NONE
NONE
OFF
OFF
OFF
NONE
Position “B”
OFF
2-C
OFF
2-C
(2-C)
2-C
2-C
2-C
SPST
SPDT
SPST
SPDT
SPDT
SPDT
SPDT
SPST
Position “C”
NOTE
: ( ) denotes momentary action.
K1
Continued
X
X
K1 PART NUMBER CODE
CONTINUED FROM ABOVE
X
Light/Circuit Location
A.
No Light
B.
F.
B.
X
Legend & Orientation
A.
None
C.
Lens Color
Position “A”
A.
No Lens
B.
Red
C.
Green
D.
Amber
E.
Clear
Position “C”
A.
No Lens
B.
Red
C.
Green
D.
Amber
E.
Clear
Dependent Light
ON in position “A”
Wired to terms
1
& 3
C.
Dependent Light
ON in position “A”
Wired to terms
1
& 3
Dependent Light
ON in position “C”
Wired to terms
2
& 4
D.
E.
G.
Independent Light
ON in position “C”
Wired to terms
2
& 4
F.
Dependent Light
ON in position “A”
Wired to terms
1
& 3
Independent Light
ON in position “C”
Wired to terms 3 &
4
G.
D.
H.
J.
NOTES:
• No momentary switches with dependent lights.
• Neon lamps only to be coded with clear or amber
lenses.
• LED lenses must be clear or same color as LED.
• No dependent light in OFF position.
• All legends printed on actuators without lens(es)
will be white except actuator codes C, F, J, M & R.
• All legends printed on lenses will be white except
on clear lens(es) will be black.
Independent Light
at position “A”
Wired to terms 3 &
4
H.
K.
Independent Light
at position “A”
Wired to terms
3
& 4
Dependent Light
ON in position “C”
Wired to terms
2
& 4
E.
L.
Independent Light
at position “C”
Wired to terms 3 &
4
M.
N.
D
= Dependent Light
I
= Independent Light
NOTES:
• LED anode (+) terminal number shown in
bold.
• Light on OFF side must be independent.
• Contact factory for multiple light types in the
same switch.
P.
R.
•
K1 panel plugs available as shown on page 167.
148
OTTO Full Line Catalog
Specifications Subject To Change Without Notice
SEALED, ILLUMINATED ROCKER SWITCHES
LOW COST, SNAP-IN ROCKER FOR WET & DUSTY ENVIRONMENTS
SNAP-IN
ROCKERS
K1
ROCKER SWITCHES
Specifications Subject To Change Without Notice
www.ottoexcellence.com
149
MicroPython Open Source section
京公网安备 11010802033920号
EEWORLD
