25.350.5353.0

1. Overview Will passive devices produce nonlinear intermodulation distortion? The answer is yes! Although there is no systematic theoretical analysis, it has been found in engineerin...[Details]

1 Introduction Intelligent control instruments are one of the most commonly used controllers in industrial control. They are mainly aimed at a specific parameter (such as pressure, tempera...[Details]

With concerns about the growing energy crisis, motor efficiency has become an important and timely topic. This is because motors use 63% to 70% of the electricity produced in the United States and ...[Details]

With the widespread application of new services and technologies in the communications industry, the scale and capacity of operators' network construction are getting larger and larger, and the ris...[Details]

The DisplayPort interface standard is approved by the Video Electronics Standards Association (VESA) to provide an open, scalable standard for the entire industry. The development of DisplayPort ca...[Details]

1 Introduction The stepper motor is an actuator of an open-loop servo motion system, which is controlled in a pulse mode and outputs angular displacement. Compared with AC servo motors and DC servo ...[Details]

The battery and its management system are one of the key technologies of electric vehicles. In the past few years, most companies have encountered embarrassment in the development of electric vehic...[Details]

The cruise control system (CCS) of a vehicle is also called a constant speed driving system. It is an electronic control device that uses advanced electronic technology to automatically adjust the ...[Details]

According to a survey by the International Energy Agency, Asia and Australia used 1.65 trillion liters of oil for energy in 2004. The survey also showed that since 1990, the demand for oil has been...[Details]

The construction of voltage and current feedback amplifier application circuits is generally the same, except for a few key points. Current feedback amplifiers have higher sl...[Details]

This article examines some of the requirements that need to be met when designing DC/DC converters used in telecom and distributed power systems (DPS). Telecom DC/DC converters have an input voltag...[Details]

introduction ISP in-system programmable technology is different from the previous PLD which requires a dedicated burner to realize logic design. It does not need to remove the ISP device to re...[Details]

VGA (Video Graphics Array) is a graphics display standard proposed by IBM in 1987. Although it is no longer an advanced display standard, it is still widely used due to its mature technology and pr...[Details]

Reference sources are widely used in various analog integrated circuits, mixed-signal integrated circuits and system integrated chips. Their accuracy and stability directly determine the accuracy of t...[Details]

Communication protocol: The first byte, MSB is 1, which is the first byte mark, the second byte, MSB is 0, which is the non-first byte mark, and so on... The last byte is the XOR checksum of the la...[Details]