This catalog contains the typical specification only due to the limitation of space. When you consider the purchase of our products, please check our specification.
For details of each product (characteristics graph, reliability information, precautions for use, and so on), see our Web site (http://www.ty-top.com/) .
c_mlcc_reli_e-E06R01
6. Capacitance （Tolerance）
Standard
C□
U□
SL
CG
0.2pF≦C≦5pF
0.2pF≦C≦10pF
C＞10pF
0.2pF≦C≦2pF
C＞2pF
: ±0.25pF
: ±0.5pF
: ±5% or ±10%
: ±0.1pF
: ±5%
Class 2
C≦10μ
F
C＞10μ
F
Thermal treatment （at 150℃ for 1hr） Note 2
1kHz±10%
120±10Hz
1±0.2Vrms
0.5±0.1Vrms
None
Specified
Value
Temperature
Compensating（Class1）
High Frequency Type
High Permittivity （Class2）
±10% or ±20%
Class 1
Standard
High Frequency Type
None
1ＭHz±10%
0.5 to 5Vrms
Test
Methods and
Remarks
Preconditioning
Measuring frequency
Measuring voltage Nte
Bias application
7. Q or Dissipation Factor
Specified
Value
Temperature
Compensating（Class1）
Standard
High Frequency Type
C＜30pF : Q≧400＋20C
C≧30pF : Q≧1000
（C：Nominal capacitance）
Refer to detailed specification
BJ, B7, C6, C7：2.5% max.
Class 1
Standard
High Frequency Type
None
1ＭHz±10%
1GHz
0.5 to 5Vrms
Class 2
C≦10μ
F
C＞10μ
F
Thermal treatment （at 150℃ for 1hr） Note 2
1½Hz±10%
120±10Hz
1±0.2Vrms
0.5±0.1Vrms
None
High Permittivity （Class2） Note 1
Test
Methods and
Remarks
Preconditioning
Measuring frequency
Measuring voltage Note 1
Bias application
High Frequency Type
Measuring equipment
Measuring jig
: HP4291A
: HP16192A
8. Temperature Characteristic （Without voltage application）
Temperature Characteristic ［ppm/℃½
C□ : 0
CG
Temperature
Compensating（Class1）
Standard
U□ : －750
SL
High Frequency Type
Specified
Value
BJ
: ＋350 to －1000
Tolerance ［ppm/℃½
G : ±30
UJ, UK
Tolerance ［ppm/℃½
G : ±30
J：±120
K：±250
Temperature Characteristic ［ppm/℃½
C□ : 0
CG
Specification
B
X5R
B7
X7R
C6
XS
C7
X7S
LD(※)
X5R
Note : ※LD Low
High Permittivity （Class2）
Capacitance
Reference
Temperature Range
change
temperature
±10%
20℃
－25 to ＋85℃
±15%
25℃
－55 to ＋85℃
±15%
25℃
－55 to ＋125℃
±22%
25℃
－55 to ＋105℃
±22%
25℃
－55 to ＋125℃
±15%
25℃
－55 to ＋85℃
distortion high value multilayer ceramic capacitor
Class 1
Capacitance at 20℃ and 85℃ shall be measured in thermal equilibrium, and the temperature characteristic shall be calculated from the
following equation.
（C
85
－C
20
）
×10
6
（ppm/℃）
△T＝65
C
20
×△T
Test
Methods and
Remarks
Class 2
Capacitance at each step shall be measured in thermal equilibrium, and the temperature characteristic shall be calculated from the following
equation.
Step
B
X5R、X7R、X6S、X7S
1
Minimum operating temperature
2
20℃
25℃
3
Maximum operating temperature
（C－C
2
）
C
2
×100（%）
C ：Capacitance in Step 1 or Step 3
C
2
：Capacitance in Step 2
▶
This catalog contains the typical specification only due to the limitation of space. When you consider the purchase of our products, please check our specification.
For details of each product (characteristics graph, reliability information, precautions for use, and so on), see our Web site (http://www.ty-top.com/) .
c_mlcc_reli_e-E06R01
9. Deflection
Temperature
Compensating（Class1）
Standard
High Frequency Type
Appearance
Capacitance change
Appearance
Capacitance change
Appearance
Capacitance change
: No abnormality
: Within ±5% or ±0.5 pF, whichever is larger.
: No abnormality
: Within±0.5 pF
: No abnormality
: Within ±12.5%
Specified
Value
High Permittivity （Class2）
Test
Methods and
Remarks
Board
Thickness
Warp
Duration
Multilayer Ceramic Capacitors
021, 042, 063,
※
105 Type
The other types
Glass epoxy-resin substrate
0.8mm
1.6mm
1mm
10 sec.
※
105 Type thickness, C： 0.2mm ,P： 0.3mm.
Capacitance measurement shall be conducted
with the board bent
10. Body Strength
Specified
Value
Temperature
Compensating（Class1）
High Permittivity （Class2）
High Frequency 105Type
Applied force
: 5N
Duraton
: 10 sec.
Standard
High Frequency Type
－
No mechanical damage.
－
Test
Methods and
Remarks
11. Adhesive Strength of Terminal Electrodes
Specified
Value
Temperature
Compensating（Class1）
High Permittivity （Class2）
Test
Methods and
Remarks
Multilayer Ceramic Capacitors
021, 042, 063 Type
105 Type or more
2N
5N
30±5 sec.
Standard
High Frequency Type
No terminal separation or its indication.
Applied force
Duration
12. Solderability
Specified
Value
Temperature
Compensating（Class1）
High Permittivity （Class2）
Test
Methods and
Remarks
Solder type
Solder temperature
Duration
Eutectic solder
H60A or H63A
230±5℃
4±1 sec.
Lead-free solder
Sn-3.0Ag-0.5Cu
245±3℃
Standard
High Frequency Type
At least 95% of terminal electrode is covered by new solder.
▶
This catalog contains the typical specification only due to the limitation of space. When you consider the purchase of our products, please check our specification.
For details of each product (characteristics graph, reliability information, precautions for use, and so on), see our Web site (http://www.ty-top.com/) .
c_mlcc_reli_e-E06R01
13. Resistance to Soldering
Appearance
Capacitance change
Q
Insulation resistance
Withstanding voltage
Appearance
Capacitance change
Q
Insulation resistance
Withstanding voltage
Appearance
Capacitance change
Dissipation factor
Insulation resistance
Withstanding voltage
Class 1
021, 042, 063 Type
Preconditioning
Preheating
Solder temp.
Duration
Recovery
150℃, 1 to 2 min.
None
80 to 100℃, 2 to 5 min.
150 to 200℃, 2 to 5 min.
105 Type
: No abnormality
: Within ±2.5% or ±0.25pF, whichever is larger.
: Initial value
: Initial value
（between terminals） : No abnormality
: No abnormality
: Within ±2.5%
: Initial value
: Initial value
（between terminals） : No abnormality
: No abnormality
: Within ±7.5%
: Initial value
: Initial value
（between terminals）: No abnormality
Standard
Temperature
Compensating（Class1）
Specified
Value
High Frequency Type
High Permittivity （Class2）
Note 1
Test
Methods and
Remarks
270±5℃
3±0.5 sec.
6 to 24 hrs （Standard condition） Note 5
Class 2
105, 107, 212 Type
316, 325, 432 Type
Thermal treatment （at 150℃ for 1 hr） Note 2
80 to 100℃, 2 to 5 min.
80 to 100℃, 5 to 10 min.
150 to 200℃, 2 to 5 min.
150 to 200℃, 5 to 10 min.
270±5℃
3±0.5 sec.
24±2 hrs （Standard condition） Note 5
021, 042、063 Type
Preconditioning
Preheating
Solder temp.
Duration
Recovery
14. Temperature Cycle (Thermal Shock）
150℃, 1 to 2 min.
Standard
Temperature
Compensating（Class1）
Specified
Value
High Frequency Type
Appearance
Capacitance change
Q
Insulation resistance
Withstanding voltage
Appearance
Capacitance change
Q
Insulation resistance
Withstanding voltage
Appearance
Capacitance change
Dissipation factor
Insulation resistance
Withstanding voltage
Class 1
: No abnormality
: Within ±2.5% or ±0.25pF, whichever is larger.
: Initial value
: Initial value
（between terminals） : No abnormality
: No abnormality
: Within ±0.25pF
: Initial value
: Initial value
（between terminals） : No abnormality
: No abnormality
: Within ±7.5%
: Initial value
: Initial value
（between terminals） : No abnormality
Class 2
Thermal treatment （at 150℃ for 1 hr）
Note 2
High Permittivity （Class2）
Note 1
Preconditioning
Step
1
2
3
4
None
Test
Methods and
Remarks
1 cycle
Temperature（℃）
Minimum operating temperature
Normal temperature
Maximum operating temperature
Normal temperature
5 times
Time（min.）
30±3
2 to 3
30±3
2 to 3
Number of cycles
Recovery
6 to 24 hrs （Standard condition） Note 5
24±2 hrs （Standard condition） Note 5
▶
This catalog contains the typical specification only due to the limitation of space. When you consider the purchase of our products, please check our specification.
For details of each product (characteristics graph, reliability information, precautions for use, and so on), see our Web site (http://www.ty-top.com/) .
c_mlcc_reli_e-E06R01
15. Humidity （Steady State）
Appearance
Capacitance change
Q
: No abnormality
: Within ±5% or ±0.5pF, whichever is larger.
: C＜10pF : Q≧200＋10C
10≦C＜30pF : Q≧275＋2.5C
C≧30pF:Q≧350（C：Nominal capacitance）
: 1000 MΩmin.
: No abnormality
: Within ±0.5pF,
: 1000 MΩmin.
:
:
:
:
No abnormality
Within ±12.5%
5.0% max.
50 MΩ F or 1000 MΩwhichever is smaller.
μ
Class 2
All items
Thermal treatment（ at 150℃ for 1 hr） Note 2
40±2℃
90 to 95%RH
500＋24/－0 hrs
24±2 hrs （Standard condition） Note 5
Standard
Temperature
Compensating（Class1）
Specified
Value
High Frequency Type
Insulation resistance
Appearance
Capacitance change
Insulation resistance
Appearance
Capacitance change
Dissipation factor
Insulation resistance
Class 1
Standard
High Frequency Type
None
40±2℃
60±2℃
90 to 95%RH
500＋24/－0 hrs
6 to 24 hrs （Standard condition） Note 5
High Permittivity （Class2）
Note 1
Test
Methods and
Remarks
Preconditioning
Temperature
Humidity
Duration
Recovery
16. Humidity Loading
Appearance
Capacitance change
Q
Insulation resistance
Appearance
Capacitance change
High Frequency Type
Insulation resistance
Appearance
Capacitance change
Dissipation factor
Insulation resistance
Class 1
High Frequency Type
None
40±2℃
90 to 95%RH
500＋24/－0 hrs
Rated voltage
50mA max.
6 to 24 hrs （Standard condition） Note 5
60±2℃
: No abnormality
: Within ±7.5% or ±0.75pF, whichever is larger.
: C＜30pF：Q≧100＋10C/3
C≧30pF：Q≧200 （C：Nominal capacitance）
: 500 MΩmin.
: No abnormality
: C≦2pF：Within ±0.4 pF
C＞2pF：Within ±0.75 pF
（C：Nominal capacitance）
: 500 MΩmin.
:
:
:
:
No abnormality
Within ±12.5%
5.0% max.
25 MΩ F or 500 MΩ whichever is smaller.
μ
,
Class 2
All items
Voltage treatment
（Rated voltage are applied for 1 hour at 40℃） Note 3
40±2℃
90 to 95%RH
500＋24/－0 hrs
Rated voltage
50mA max.
24±2 hrs（Standard condition） Note 5
Standard
Temperature
Compensating（Class1）
Specified
Value
High Permittivity （Class2）
Note 1
Standard
Preconditioning
Test
Methods and
Remarks
Temperature
Humidity
Duration
Applied voltage
Charge/discharge
current
Recovery
▶
This catalog contains the typical specification only due to the limitation of space. When you consider the purchase of our products, please check our specification.
For details of each product (characteristics graph, reliability information, precautions for use, and so on), see our Web site (http://www.ty-top.com/) .
Various registers (x represents a number, such as TA1, then x = 1)1 TAxR - 16-bit counterThe 16-bit timer/counter register TAxR increases or decreases with each rising edge of the clock signal (depend...
Since the project of our industrial measurement and control DIY project group was determined, we have basically carried out corresponding preparations around the center of this activity, and cooperate...
Central topics:
Boost circuit design featuresBoost circuit operation modeLinear dimming capability of the driver circuitDesign of Closed-loop Control CircuitChip compensation network controlBoost circ...
From being a global leader to losing the market, Korean battery manufacturers have always wanted to regain the lost market and dignity, but facing Chinese battery manufacturers represented by CAT...[Details]
Dual-mode inverters can operate both in conjunction with the grid and independently. These inverters can inject excess energy from renewable energy and storage devices into the grid, and withdraw p...[Details]
Tesla and BYD, vying for dominance in the global electric vehicle market, are reportedly considering adopting Samsung's AMOLED (active-matrix organic light-emitting diode) technology for their next...[Details]
introduction
With the development of digital and network technologies, broadcasting technology has become increasingly diversified, with the most significant trend being the transition from an...[Details]
What is "Car Electronic Fence"
Fleet managers can define a graphical area (regular or irregular) or divide it into administrative zones in Yamei Technology's vehicle backend management system ...[Details]
summary
There are multiple approaches to making industrial systems more intelligent, including applying artificial intelligence (AI) technology at the edge and in the cloud to sensor...[Details]
On August 25th, TSMC, the world's leading contract chip manufacturer, attracted significant attention for its decision to build a chip manufacturing facility in Arizona. TSMC primarily manufactures...[Details]
1. Introduction
Electronic scales are gradually replacing traditional measuring tools like springs and balances in everyday life, such as electronic price computing scales and electronic weigh...[Details]
For healthcare professionals, accurate diagnosis and treatment are crucial for a clear picture of a person's health. However, healthcare professionals often rely on tests at medical facilities, cli...[Details]
Gross profit margin jumped from 13.6% in the first half of last year to 25.9%, almost doubling year-on-year.
On August 21, RoboSense released its interim performance report, in which the...[Details]
On August 21, WeRide officially launched WePilot AiDrive, a one-stage end-to-end assisted driving solution developed in cooperation with Bosch. This comes only half a year after the two parties' "t...[Details]
Recently, Tesla released the "Tesla Car Voice Assistant Terms of Use", announcing that the car voice assistant will be connected to the Doubao large model (Skylark large model) and DeepSeek Chat pr...[Details]
On August 22, the National Energy Administration released the latest data, showing that by the end of July 2025, China's total number of electric vehicle charging infrastructure will reach 16.696 m...[Details]
On August 22, South Korean media Nate reported on the 20th local time that Samsung Electronics is introducing Hyper Cell technology into its most advanced 2nm process technology, striving to improv...[Details]
Electric vehicles are now widespread, but they've brought with them a host of problems, the most prominent of which is charging. Small electric vehicles (EVs) are a new form of transportation in a ...[Details]
MCU
京公网安备 11010802033920号
EEWORLD
