Tripp Lite Switched ATS / Auto Transfer Switch provides a redundant power option for single-corded network
devices. Dual input cords support separate connection to PRIMARY and SECONDARY power sources. The
ATS will normally maintain continuous output to all outlets as derived from the primary input cable. If the primary
power source becomes unstable or fails altogether, the ATS will switch over to the secondary power source until
the primary input is restored and stable. Switched PDU features include individually controllable output
receptacles and built-in network interface. Super-fast switchover between primary and secondary power sources
occurs within milliseconds. ATS functionality is supported by any two compatible AC power sources, regardless
of phase angle, to support a variety of advanced redundant power networking applications. Enables fault tolerant
hot-swappable UPS protection when used with a single UPS and fully redundant UPS protection when each cord
is connected to a separate UPS system. In a two-UPS environment, the primary input cable must be supported
by a full time sine wave UPS with zero transfer time. Tripp Lite SmartOnline series is highly recommended for
use as the primary UPS in a two-UPS application. ATS configurations utilizing separate mains circuits, backup
single-corded network devices
Package Includes
PDU with attached L5-20P input
power cord
Detachable C19 to NEMA
L5-20P 12 ft/3.6m secondary
input cord
Two NEMA L5-20R to NEMA
5-20P plug adapters
Installable 1U mounting brackets
User manual with warranty
information
generators and even separate utility power grid feeds are fully supported. On-board ATS processor constantly evaluates power quality on both input sources to
prevent transfer to the secondary source when unavailable or of lower quality than the primary source. Front input LED's display primary or secondary power
availability.
Features
120V 20A Power Distribution Unit (PDU) with Auto-Transfer Switch (ATS) and Switched outlets (Agency de-rated to 16A)
ATS features provide redundant power for critical network equipment with a single input power cord
Switched PDU features enable programmable or real-time control of individual outlets via built-in network interface
Visual meter reports output power consumption in amps
16 switched NEMA 5-15/20R outlets; 1U horizontal rackmount form factor; 14.5 in. / 36.8 cm depth
Two NEMA L5-20P inputs (includes two 5-20P adapters) connect to separate PRIMARY and SECONDARY inputs
ATS normally maintains output sourced from the primary input; As primary input power fails or becomes unstable, the ATS will switch to power equipment
1/5
from the secondary input until power on the primary input is restored and stable
ATS configurations enable hot-swappable UPS protection when used with a single UPS and redundant UPS protection when each input is connected to a
separate UPS system (in a two-UPS environment, the primary input cable must be supported by an online UPS similar to Tripp Lite SmartOnline)
Advanced ATS configurations using separate mains circuits, backup generators and out of phase utility feeds are fully supported
On-board processor evaluates power quality on both inputs to prevent transfer to the secondary source when unavailable or of lower quality than the
primary source
2-7 millisecond transfer time between primary and secondary inputs
[i=s] This post was last edited by azhiking on 2015-6-11 21:53 [/i] [color=rgb(51, 51, 51)][font=宋体]1. What is BabyLinux [/font][/color] [color=rgb(51, 51, 51)][font=宋体]2. Why do we need to make such ...
There are many non-synthesizable languages in Verilog that are used for simulation and debugging, but how can I use them on Quartus II?I only know about synthesizable statements, and I can see the res...
Module power supply, switching power supply, power module DC power supply regulated power supply Nanjing Pengtu Power Supply [url] www.025021.net [/ url] The design of high-frequency magnetic componen...
The design requirement of the self-service tour instrument based on the single-chip microcomputer is that the designer needs to be familiar with the structure and principle of the single-chip microcom...
Hello everyone, how do I write a program for a frequency meter based on a 51 single-chip microcomputer? There are low-frequency signals of 0~100HZ and high-frequency signals of 25MHZ. How do I write t...
Remote keyless entry (RKE) systems have become popular with users, with more than 80% of new cars in North America and more than 70% in Europe equipped with RKE systems. In addition to the obvious ...[Details]
The Portable Digital Data Acquisition System (PDDAS) uses LabVIEW Real-Time and PXI to control the wind tunnel test and record air pressure data from 128 different channels.
"The LabVIEW Real-...[Details]
As LEDs continue to improve in almost every aspect of performance and cost, LED lighting is being used in an increasingly wide range of applications, among which LED street lights are a focus of in...[Details]
This paper establishes a fuel cell engine test platform based on the NI integrated hardware and software environment. This platform can realize the test and control of fuel cell engines and their a...[Details]
1. Introduction
With the gradual automation and modernization of industrial control systems, fieldbus control systems have received more and more attention and application. CAN bus is currentl...[Details]
1 Introduction
The Third Steel Plant of Jigang Group is a key investment project of Jigang Group during the "15th Five-Year Plan". It has introduced first-class domestic and foreign advanced eq...[Details]
1 Introduction
There have been many studies on the detection and protection of power grid short circuit and line fault. The short circuit, overload and overvoltage protectors on the market have ...[Details]
Single-chip microcomputers are widely used because of their small size, powerful functions and low price. This article introduces the method of designing a micro electronic piano using the AT89C51 sin...[Details]
The TPS92210 is a single-stage LED lighting pulse width modulation (PWM) controller. The TRIAC dimmable solution not only regulates the LED current, but also achieves a power factor close to 1. The...[Details]
D5026A is a driver IC designed by Shanghai Debei Electronics for energy-saving LED display screens. Its design concept is energy-saving and compatible with existing solutions, that is, it can be ...[Details]
0 Introduction
High-precision current source can provide high-precision current supply for precision instruments, and is suitable for automatic measurement tasks of various resistors in semico...[Details]
With the rapid development of the national economy, lifting and hoisting operations are used more and more frequently and widely in various fields of economic construction. China has continuously expl...[Details]
store
To prevent moisture, LEDs should be stored in a dry and ventilated environment with a storage temperature of -40°C to +100°C and a relative humidity below 85%.
The LED should be use...[Details]
Car lights, whether headlights, fog lights or tail lights, play an important role in driving safety. However, the material of the car lights determines that the probability of damage in a collision...[Details]
Direct digital frequency synthesis (DDS) has fast frequency switching and modulation capabilities and is widely used. However, when low power consumption and low cost are the main considerations, D...[Details]
Linux and Android
京公网安备 11010802033920号
EEWORLD
