URC_D-30W Series
30W,4:1WIDE
INPUT, ISOLATED & REGULATED
THREE OUTPUT DIP DC-DC CONVERTER
FEATURES
●
Efficiency up to 88%
●
4:1 wide input voltage range
●
1500VDC isolation
●
Six-sided metal shield
●
Short circuit protection
(automatic recovery)
●
Operating temperature: -40°C to +85°C
●
Industry standard pinout
Patent Protection
RoHS
APPLICATION
URC_D-30W series offer 30W of output， wide input
voltage:9-36VDC, 18-75VDC, and features 1500VDC
isolation, six-sided metal shield， over current and short
circuit protection. All models are particularly suitable for
industrial, telecommunication, electric power, test
equipments applications.
PART NUMBER SYSTEM
URC240515D-30W
Rated Pow er
Package
Supplement Output Voltage
Main Output Voltage
Input Voltage
Product Series
SELECTION GUIDE
Model Number
URC240312D-30W
URC240315D-30W
URC240512D-30W
URC240515D-30W
URC480312D-30W
URC480315D-30W
48
(18-75)
URC480512D-30W
URC480515D-30W
80
24
(9-36)
40
Input
Voltage(VDC)
Nominal
Max*
(Range)
Output
Voltage
(VDC)
3.3/±12
3.3/±15
5/±12
5/±15
3.3/±12
3.3/±15
5/±12
5/±15
Output Current (mA)
Max.
3500/±625
3500/±500
3000/±625
3000/±500
3500/±625
3500/±500
3000/±625
3000/±500
Min.
175/±31
175/±25
150/±31
150/±25
175/±31
175/±25
150/±31
150/±25
712
720
1420
30
30
30
30
30
Input Current
Reflected
(mA)(typ.)
Ripple
Current
@Max.
@No Load (mA,typ.)
Load
1450
30
30
30
30
Max. Capacitive
Load (µF)
4700/300
4700/220
4700/300
4700/220
4700/300
4700/220
4700/300
4700/220
Efficiency
(%, typ.) @Max.
Load
85
86
88
88
85
85
88
87
Note: 1.*Input voltage can’t exceed this value, or will cause the permanent damage.
2. Add suffix
“H”
for heat sink mounted, for example URC240515D-30WH.
INPUT SPECIFICATIONS
Item
Test Conditions
Nominal Input
(24V)
Under Voltage Lockout
Nominal Input
(48V)
Start-up Time
Models ON
Ctrl*
Models OFF
Input current (Models OFF)
Input Filter
Note:*
The CTRL pin voltage is referenced to GND.
Min.
Models ON
Models OFF
Models ON
Models OFF
--
8
--
16
--
Typ.
--
--
--
--
10
Max.
9
--
17.8
--
--
Unit
VDC
ms
Ctrl leave open or connect TTL high level(3.5-12VDC)
Ctrl connect GND or low level(0-1.2VDC)
--
--
Pi Filter
1
mA
OUTPUT SPECIFICATIONS
Item
Output Power
Main Output Voltage Accuracy
Supplement Output Voltage Accuracy
Refer to recommended circuit
Test Conditions
Min.
1.5
--
--
Typ.
--
±1
±3
URC_D-30W
Max.
30
±3
±5
2013.05.31-A/2
Unit
W
%
The copyright and authority for the interpretation of the products are reserved by
MORNSUN
Page 1 of 5
Load Regulation*
From 10% to 100% load input, Nominal Input
(Main output)
From 10% to 100% load input, Nominal Input
(Supplement output)
100% load, Input voltage from low to high
(Main output)
100% load, Input voltage from low to high
(Supplement output)
100% load(Main output and one Main output
Supplement output).
From 25% to 100% load input(the Supplement
output
other one Supplement output)
load step change
100% full load
20MHz Bandwidth
3.3V output
--
--
--
--
--
--
--
--
--
--
--
--
--
--
110
--
--
---
--
--
--
±3
300
--
85
3.9
6.2
15
18
130
±2
±5
±1
%
±5
±2
±5
±5
500
±0.03
120
--
--
--
--
--
%Io
VDC
μs
%/°C
mVp-p
Voltage Regulation
Cross Regulation
Transient Response Deviation
Transient Recovery Time
Temperature Drift
Ripple & Noise**
Over Voltage Protection(Inside circuit)
5V output
12V output
15V output
Over Current Protection
Short Circuit Protection
Input voltage range
Hiccup, continual, auto-recovery
Note: *Triple output models unbalanced load (25/100%):
±5%Max.
** Ripple and noise tested by
“parallel
cable” method. See detailed operation instructions at
DC-DC application notes.
COMMON SPECIFICATIONS
Item
Isolation Voltage
Isolation Resistance
Isolation Capacitance
Switching Frequency
MTBF
Case Material
Weight
Without heatsink
With heatsink
--
--
Test Conditions
Tested for 1 minute and leakage current less than 1 mA
Test at 500VDC
Input/Output,100KHz/1V
Full load, nominal input
MIL-HDBK-217F@25℃
Min.
1500
1000
--
--
1000
Typ.
--
--
2000
400
--
Max.
--
--
--
--
--
Unit
VDC
MΩ
pF
KHz
K hours
Aluminum Alloy
40
52
--
--
g
ENVIRONMENTAL SPECIFICATIONS
Item
Storage Humidity
Operating Temperature
Storage Temperature
The Max. Case Temperature
Lead Temperature
Cooling
Operating Temperature curve range
1.5mm from case for 10 seconds
Test Conditions
Non condensing
Power derating (above 55℃)
Min.
5
-40
-55
--
--
Typ.
--
--
--
--
--
Max.
95
85
125
105
300
°C
Unit
%
Free air convection
EMC SPECIFICATIONS
EMI
CE
RE
ESD
EMS
EFT
Surge
CISPR22/EN55022
CISPR22/EN55022
IEC/EN61000-4-2
IEC/EN61000-4-4
IEC/EN61000-4-5
CLASS B（External Circuit Refer to Figure1）
CLASS B（External Circuit Refer to Figure1）
Contact
±2KV
±2KV
±4KV
perf. Criteria B
perf. Criteria B（External Circuit Refer to Figure1）
perf. Criteria B（External Circuit Refer to Figure1）
The copyright and authority for the interpretation of the products are reserved by
MORNSUN
URC_D-30W
2013.05.31-A/2
Page 2 of 5
EMC RECOMMENDED CIRCUIT
FU SE
Vi n
LD M
L CM
C3
Vi n
+Vo 1
+Vo 2
L O AD
LO AD
MO V
G ND
TV S
C1
C0
C2
EUT
0V
G ND
LO AD
-Vo 2
①
②
(Figure 1)
C4
Recommended external circuit parameters:
Model
FUSE
MOV
LDM
TVS
C0
C1
LCM
C2
C3
C4
URC24_D-30W
URC48_D-30W
Choose according to practical input current
S10K35
S10K60
56μH
SMCJ48A
680μF/50V
SMCJ90A
680μF/100V
1μF /100V
1mH（0.1V 100KHz）15T core
:
TS7 T12*6*4
2.2μF /100V
--
1nF/2KV
Note: 1. In Figure 1,part①is EMS Recommended external circuit, part②is EMI recommended external circuit. Choose according to requirements.
2. If want to meet higher level of RE, add a common mode inductance after Lcm in figure 1: 1.5mH 20T core:A10 T12*6*4.
EMC RECOMMENDED CIRCUIT PCB LAYOUT
(Figure 2)
EMC TEST WAVEFORM(CLASS B TEST CIRCUIT)
URC240515D-30W
CE (Positive line)
URC240515D-30W
CE (Negative line)
URC240515D-30W
RE(Horizontal)
URC240515D-30W
RE(Vertical)
The copyright and authority for the interpretation of the products are reserved by
MORNSUN
URC_D-30W
2013.05.31-A/2
Page 3 of 5
PRODUCT TYPICAL CURVE
Output Power Percent (%)
120
100
80
60
40
20
0
-40
0
40 5565 85
120
Operating Temp(°C)
Safe Operating Area
With heatsink
Without heatsink
Efficiency VS Input Voltage curve
(Full Load)
URC240515D-30W
100
90
80
70
60
50
40
30
20
10
0
9
12
15
18
21
24
27
30
33
36
Efficiency VS Output Load curve
(Vin=Vin-nominal)
URC240515D-30W
100
90
80
70
60
50
40
30
20
10
0
10
20
30 40
50
60
70
80
90 100
Efficiency(%)
Efficiency(%)
Input Voltage(V)
Total Output Current (% )
OUTLINE DIMENSIONS, RECOMMENDED FOOTPRINT & PACKAGING
The copyright and authority for the interpretation of the products are reserved by
MORNSUN
URC_D-30W
2013.05.31-A/2
Page 4 of 5
HEATSINK ASSEMBLY & PACKAGE DIAGRAM
TEST CONFIGURATIONS
Input Reflected-Ripple Current Test Setup
Input reflected-ripple current is measured with an inductor Lin and Cin to simulate source impedance.
Oscilloscope
Lin
Cin
Current
Probe
DC DC
Load
Lin(4.7µH)
Cin(220µF, ESR < 1.0Ω at 100 KHz)
RECOMMENDED CIRCUIT
If you want to further decrease the Input surge current and output ripple, an capacitor filtering network may be connected to the input and output
ends of the DC/DC converter, see (Figure 3).
It should also be noted that the capacitance of filter capacitor must be proper. If the capacitance is too big, a startup problem might arise. For every
channel of output, provided the safe and reliable operation is ensured, the recommended capacitance of its filter capacitor sees (Table 1).
Vin
Vo 1
Vo 2
Cout
Cout
Cout
0V
Vo 3
DC
GND
DC
(Figure 3) Recommended Circuit
EXTERNAL CAPACITOR TABLE (Table 1)
Vout
Cout
(VDC)
(µF)
3.3/5
10
±12/±15
4.7
Note:
1. The load shouldn't be less than 5%, otherwise ripple will increase dramatically.
2.
Max. Capacitive Load is tested on Vin-nominal and full load.
3. All specifications measured at Ta=25°C, humidity<75%, nominal input voltage and rated output load unless otherwise specified.
4. In this datasheet, all the test methods of indications are based on corporate standards.
5. Only typical models listed, other models may be different, please contact our technical person for more details.
6. Specifications subject to change without notice.
MORNSUN Science & Technology Co.,Ltd.
Address: No. 5, Kehui St. 1, Kehui development center, Science Ave., Guangzhou Science City, Luogang district, Guangzhou,P.R.China.
Tel: 86-20-38601850
Fax:86-20-38601272
E-mail: info@mornsun.cn
Http://www.mornsun-power.com
The copyright and authority for the interpretation of the products are reserved by
MORNSUN
URC_D-30W
2013.05.31-A/2
Page 5 of 5
京公网安备 11010802033920号
EEWORLD
