CTS Model 416 incorporates a high Q quartz resonator and is ideal for supporting a wide range of commercial and
industrial applications.
Ordering Information
Model
416
Mode of
Oscillation
F
Frequency Code
[MHz]
XXX
Tolerance
@ +25°C
3
Temperature
Stability
5
Temperature
Range
C
Load
Capacitance
D
Packaging
R
Mode
Code
Fundamental
F
Code
1
X
2
Y
3
Tolerance
±10ppm
±15ppm
±20ppm
±25ppm
±30ppm
Code
A
C
D
I
Temp. Range
-10°C to +60°C
-20°C to +70°C
-30°C to +85°C
-40°C to +85°C
Packing
Code
3k pcs./reel
R
Code
Frequency
Product Frequency Code
1
Code
1
X
2
Y
3
5
Stability
±10ppm
2
±15ppm
±20ppm
±25ppm
±30ppm
±50ppm
Code Capacitance Code Capacitance
W
L
5pF
12pF
16pF
6pF
T
C
7pF
18pF
V
D
8pF
20pF
K
E
9pF
Series
J
S
10pF
A
Notes:
1] Refer to document 016-1454-0, Frequency Code Tables. 3-digits for frequencies <100MHz.
2] Check factory availability when combined with -40°C to +85°C temperature range.
Not all performance combinations and frequencies may be available.
Contact your local CTS Representative or CTS Customer Service for availability.
This product is specified for use only in standard commercial applications. Supplier disclaims all express and implied warranties and liability in connection with any use of this
product in any non-commercial applications or in any application that may expose the product to conditions that are outside of the tolerances provided in its specification.
[i=s]This post was last edited by alan000345 on 2019-5-27 10:04[/i] [p=25, null, left][color=rgb(51, 51, 51)][font=微软雅黑]Active Load Pull[/font][/color][/p] [p=25, null, left][color=rgb(51, 51, 51)][fo...
Some time ago, I saw several netizens encountering problems when doing I2C. I recently took some time to learn. Here are some places in the routine that are prone to errors. #define I2C_SLAVE_ADDR 0x5...
For single-chip microcomputers, GPIO is often used. Here, an oscilloscope is used to test the IO flip rate to see how fast it is.
The manual gives some characteristics of GPIODirectly flip GPIO progra...
1. In the newly created PCB, press the "O"-"O" (Option-color) shortcut key to set the color of each layer of the PCB: Three principles for setting layer color: ① Close to nature and looks comfortable;...
The South Africa World Cup ended in July. Beijing was scorching hot and hot like a sauna. There were heavy rain and typhoons in the south, west and northeast. Embedded and "spygate" were hot topics in...
I'm planning to make an oscilloscope recently, but I can't think of a good way to display the waveform on 12864. Has anyone done it before? I hope you can give me some advice. Thank you~~~~...
Signal sources have developed to a very wide range today. We can classify them according to the frequency range: ultra-low frequency (0.1m~1kHz), audio (20Hz~20kHz), video (20kHz~10MHz), radio fre...[Details]
Abstract: Based on the research of the communication process between the reader and the RFID tag, combined with the EPC C1G2 protocol and ISO/IEC18000.6 protocol, a digital circuit of RFID tag appl...[Details]
introduction
Mobile phones, MP3 players, hard disk players, digital cameras, PDAs and other devices are all controlled by navigation keys. Currently, the more popular navigation key contro...[Details]
introduction
Usually, there are many input and output ports in RF systems, and it is expensive to use a multi-port network analyzer to analyze scattering characteristics. Therefore, it is ...[Details]
In order to ensure the reliability of the driving assistance system and the basic functions of the car, and also to leave suitable connection interfaces for the car's future new entertainment and ...[Details]
1. Introduction
The intelligent detector discussed in this paper is an integrated semiconductor photodetector. Compared with traditional semiconductor photosensitive devices, its most ...[Details]
Application of TWLA500 in ADC and related fields
FAE: On-site technical support.
Provide technical support for the application of the products you sell, and handle quality issues ra...[Details]
In recent years, with the rapid economic growth, wireless communication has developed rapidly. Since spread spectrum signals have the characteristics of anti-interference, confidentiality, anti-det...[Details]
1 Introduction
Many test systems require real-time data acquisition while continuously moving. If the test process is discontinuous, or the test position is in front and the acquisition is...[Details]
Frequent dropped calls, "network busy" messages, and intermittent service are all potential symptoms of poor device interoperability. Often, these issues are caused by either insufficient validatio...[Details]
With the development of LED technology, the application of LED has expanded from the traditional low-power portable product backlight to medium- and high-power indoor lighting, outdoor lighting, an...[Details]
0 Introduction
μClinux is an operating system for embedded control. It inherits most of the features of the Linux kernel and is designed for embedded microprocessors without a memory manag...[Details]
0 Introduction
The PTZ controller designed with a single-chip microcomputer as the core can control the camera to move over a large range and at a wide angle in monitoring situations, so t...[Details]
The dual-field-of-view infrared optical system can simultaneously provide two images with different magnifications and fields of view. The large field of view in the system has a lower resolution a...[Details]
0 Introduction
With the development of technology, the scale of tasks that need to be processed in the fields of missile control and communication is getting larger and larger. Although wi...[Details]