PT-50
Vishay Dale
Through Hole Transformers Trigger, SCR Isolation
FEATURES
• Designed for low-cost trigger source isolation in
SCR power control circuits
• Small physical size and low profile provide
packaging advantages
• Designed to transfer high amplitude or long duration
pulses without saturation
• Industrial and commercial applications include motor
speed controls, lighting controls and heater controls
ELECTRICAL SPECIFICATIONS
Primary Inductance Values:
From 200 μH to 5000 μH
Turns Ratio:
1:1, 2:1 and 5:1
Temperature Range:
- 55 °C to + 105 °C
Dielectric Test at 60 Hz:
1600 V
RMS
(Windings to core)
AC Line Voltage at 60 Hz:
240 V
RMS
maximum in test
circuits shown
• Interchangeable. Designed for circuit board mounting
using same mounting dimensions as 11Z and PT-20
models
• Compliant to RoHS directive 2002/95/EC
MATERIAL SPECIFICATIONS
Bobbin:
Glass-filled nylon
Terminals:
0.025" [0.635] square tinned copper
Material Rating:
+ 105 °C class A
STANDARD ELECTRICAL SPECIFICATIONS
MODEL
PT-50-101
PT-50-102
PT-50-103
PT-50-104
PT-50-105
PT-50-106
PT-50-107
PT-50-108
PT-50-109
PT-50-110
TURNS
RATIO
1:1 ± 10 %
1:1 ± 10 %
1:1 ± 10 %
1:1 ± 10 %
1:1 ± 10 %
2:1 ± 10 %
2:1 ± 10 %
2:1 ± 10 %
2:1 ± 10 %
5:1 ± 10 %
PRIMARY
IND. MIN.
(μH)
200
500
1000
2000
5000
500
1000
2000
5000
5000
LEAKAGE
IND. MAX.
(μH)
3
6
12
13
15
6
10
12
15
1500
INTERWINDING
CAPACITY MAX.
(pF)
3
6
12
13
15
6
10
12
15
1500
PRIMARY
DCR MAX.
(Ω)
1.5
4.5
8.0
12.0
18.4
4.0
10.0
10.0
18.0
19.0
SECONDARY
DCR MAX.
(Ω)
1.5
4.5
8.0
12.0
18.4
2.0
2.0
5.0
10.0
3.0
UNIPOLAR ET
(V-μs)
570
912
1283
1853
2850
912
1288
1881
2565
2850
DIMENSIONAL CONFIGURATIONS
in inches [millimeters]
0.780
[19.8]
Max.
2
0.655
[16.9]
Max.
1
0.600
[15.24]
Dot identifies
#1 Terminal
0.025 [0.635]
Sq. Terminals Typ.
0.500
[12.70]
3
0.654
[16.6]
Max.
4
Terminal Numbers
For Ref. Only
Schematic
1
PRI.
2
3
SEC.
4
0.250 [6.35]
Min.
Document Number: 34074
Revision: 16-Dec-09
For technical questions, contact:
magnetics@vishay.com
www.vishay.com
1
Legal Disclaimer Notice
www.vishay.com
Vishay
Disclaimer
ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE TO IMPROVE
RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE.
Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively,
“Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other
disclosure relating to any product.
Vishay makes no warranty, representation or guarantee regarding the suitability of the products for any particular purpose or
the continuing production of any product. To the maximum extent permitted by applicable law, Vishay disclaims (i) any and all
liability arising out of the application or use of any product, (ii) any and all liability, including without limitation special,
consequential or incidental damages, and (iii) any and all implied warranties, including warranties of fitness for particular
purpose, non-infringement and merchantability.
Statements regarding the suitability of products for certain types of applications are based on Vishay’s knowledge of typical
requirements that are often placed on Vishay products in generic applications. Such statements are not binding statements
about the suitability of products for a particular application. It is the customer’s responsibility to validate that a particular
product with the properties described in the product specification is suitable for use in a particular application. Parameters
provided in datasheets and/or specifications may vary in different applications and performance may vary over time. All
operating parameters, including typical parameters, must be validated for each customer application by the customer’s
technical experts. Product specifications do not expand or otherwise modify Vishay’s terms and conditions of purchase,
including but not limited to the warranty expressed therein.
Except as expressly indicated in writing, Vishay products are not designed for use in medical, life-saving, or life-sustaining
applications or for any other application in which the failure of the Vishay product could result in personal injury or death.
Customers using or selling Vishay products not expressly indicated for use in such applications do so at their own risk. Please
contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for such applications.
No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by
any conduct of Vishay. Product names and markings noted herein may be trademarks of their respective owners.
Material Category Policy
Vishay Intertechnology, Inc. hereby certifies that all its products that are identified as RoHS-Compliant fulfill the
definitions and restrictions defined under Directive 2011/65/EU of The European Parliament and of the Council
of June 8, 2011 on the restriction of the use of certain hazardous substances in electrical and electronic equipment
(EEE) - recast, unless otherwise specified as non-compliant.
Please note that some Vishay documentation may still make reference to RoHS Directive 2002/95/EC. We confirm that
all the products identified as being compliant to Directive 2002/95/EC conform to Directive 2011/65/EU.
Vishay Intertechnology, Inc. hereby certifies that all its products that are identified as Halogen-Free follow Halogen-Free
requirements as per JEDEC JS709A standards. Please note that some Vishay documentation may still make reference
to the IEC 61249-2-21 definition. We confirm that all the products identified as being compliant to IEC 61249-2-21
conform to JEDEC JS709A standards.
Revision: 02-Oct-12
1
Document Number: 91000
京公网安备 11010802033920号
EEWORLD
