flash over .000050 [0.00127] nickel on entire contact, with .000030 [0.00076] gold to a distance of .200 [5.08] from mating end. Gold thickness controlled
on socket O.D.
Posts plated tin-lead over copper.
Extraction Tool
Part No. 305183
(Instruction Sheet 408-1216)
Insertion Tool
Part No. 200893-2
Note:
These contacts are used as replacement contacts for all posted connectors.
‡Single contact, free-air test current is not to be construed as contact rating current. Use only for testing. Refer to contact current carrying capability
information on page 3.
Note:
All part numbers are RoHS compliant.
12
Catalog 65910
Revised 7-07
Dimensions are in inches and
millimeters unless otherwise
specified. Values in brackets
are metric equivalents.
Dimensions are shown for
reference purposes only.
Specifications subject to change.
Technical Support
USA: 1-800-522-6752
Canada: 1-905-475-6222
Mexico: 01-800-733-8926
Central America: 52-55-5-729-0425
South America: 55-11-3611-1514
www.tycoelectronics.com
AMP Precision Pin and Socket Contacts
Signal Contacts
(Continued)
Enhanced High Current
Type III+, Crimp, Snap-In
[
.0625
+.0010
–.0020
Dia.
[
1.588
+0.025
]
–0.051
Spring, Stainless Steel
Spring,
Stainless Steel
Pin Body
Pin
.390
Min.
[9.91]
Ferrule, Brass,
Nickel Flash
.113
Max.
[2.87] Dia.
Socket
Pin
Material and Finish
—
See chart.
Contact Body—Copper
Nickel Alloy
Retention Spring—Stainless
steel
Related Product Data
Application Tooling
— Pages 75-78
Technical Documents
114-10004 Application Specification
108-10024-2 Product Specification
Contact
Finish
Gold
Tin
Gold
Tin
Strip Form
Contact No.
Pin
Socket
1-66359-6
1-66359-9
1-66597-0
1-66597-1
1-66358-9
2-66358-1
1-66598-1
1-66598-2
.530
±.010
[13.46
±0.25
]
Socket
Contact Size 16—Pin Diameter .062 [1.57]
Wire Size
Range
AWG
mm
2
Ins.
Dia.
Range
.080-.100
1
2.03-2.54
18-14
0.8-2.0
.110-.150
2
2.79-3.81
1
2
Loose Piece
Contact No.
Pin
Socket
1-66361-4
1-66361-6
66602-9
1-66602-0
1-66360-4
1-66360-6
1-66601-0
1-66601-2
Tooling Part No.**
Loose Piece
Strip Form
Hand Tool
Applicators
91519-1
3
91521-1
3
466326-
□
***
or
466923-2***
466958-1***
or
567364-
□
***
Overall insulation crimp diameter, including crimp barrel, must not exceed .125 [3.18].
Contacts can ONLY be used in CPC, Series 1 (Arr. 23-24), Series 4 (Arr. 23-13M, 23-16M, 23-22M), and VDE connectors.
3
To use with the 626 Pneumatic Tool System: remove the crimping head from the Straight Action Hand Tool (SAHT) Assembly,
order SAHT Adapter
Part No. 217201-1,
Adapter Holder
Part No. 356304-1
(with ratchet) or
189928-1
(without), and
Power Unit
Part No. 189721-1
(hand actuated) or
189722-1
(foot actuated).
**There are power options available for these tools/dies. See Battery Powered Crimp tool Kit and SDE Electric Terminator on page 30.
*** Call Technical Support for Automatic Machine Applicator Part Numbers.
Note:
All part numbers are RoHS compliant.
Ratings
Voltage:
250 Volts AC/DC
600 Volts AC/DC, Series I, VDE tested and select loaded only
Base Current:
Type III+ contacts: 17 amperes, 30˚C temperature rise with single contact on 14 AWG wire
Enhanced High Current Type III+
contacts:
25 amperes,
30˚C temperature rise with single contact on 14 AWG wire
Temperature:
-55˚C to +105˚C
VDE 0627:
XA/630/4KV/2 - Series I, VDE tested only
Multiplication Rating Factor (F)
Type III+ Contacts (Note: 1 = 17 amperes)
Shell Size
11-4
13-9
17-16
23-24
23-37
Single Circuit
Wire Size
30 AWG
14 AWG
.291
1
.278
.995
.270
.990
.985
.281
.275
.985
Percent Connector Loading
≅
50%
Wire Size
30 AWG
14 AWG
.212
.905
.175
.750
.146
.625
.550
.138
.131
.497
100%
Wire Size
30 AWG
14 AWG
.140
.684
.134
.567
.127
.472
.416
.120
.114
.376
Enhanced High Current Type III+ Contacts (14 AWG wire only - Note: 1 = 25 amperes)
Percent Connector Loading
Shell Size
11-4
13-9
17-16
23-24
23-37
Single Circuit
14 AWG
.880
.880
.880
.880
.880
≅
50%
14 AWG
.840
.640
.520
.520
.440
100%
14 AWG
.640
.480
.400
.400
.320
Enhanced High Current Contacts & M Series Connectors:
(Note: 1 = 24 amperes)
Single Circuit
14 AWG
1
≅
50%
14 AWG
.292
≅
100%
14 AWG
.250
Enhanced High Current Contacts & Metrimate Connectors:
[backcolor=rgb(222, 240, 251)] In the field of embedded systems, NOR flash and NAND flash, as storage devices, should be familiar to everyone. The interface of early NOR flash was in the form of paral...
The microcontroller uses at89s52. I want to realize the low voltage alarm. The voltage in the car is about 12.8v after the engine is turned off. If you use electrical appliances without starting the c...
wince 6.0 pxa270 1*1 key, connected in a matrix manner. No interrupt is generated when the key is pressed. Part of the code is as follows [code] XLLP_BOOL_T XllpKeyPadConfigure(XLLP_KEYPAD_REGS *v_pKe...
Platform: IAR5.30 ST-LINK Use 3IN1 board and STM32 FWLIB. The system works at 72MHz, initializes GPIO speed to 50MHz, and does not open any interrupts. while (1) { //GPIO_LED->BSRR = GPIO_Pin_6 | GPIO...
I use 2812 full comparison unit to generate PWM. Among them, PWM1, PWM3, and PWM5 output 1KHz, 40% duty cycle PWM waves, and PWM2, PWM4, and PWM6 output complementary waveforms. Now I find two problem...
The TIA Portal software's shift instructions shift the contents of an accumulator bit by bit to the left or right. The number of bits shifted is determined by N. A left shift of N bits multiplies t...[Details]
Electric motors and internal combustion engines of the same power have similar torque levels. High power requires high torque, and torque determines a vehicle's acceleration speed, commonly known a...[Details]
Current Development Status of DVR Market
A DVR, or digital video recorder, uses a hard disk for recording, unlike traditional analog video recorders. It's often called a DVR because it's a com...[Details]
On August 25th, Apple's expansion in India encountered new troubles. According to Bloomberg, Foxconn Technology Group has recalled approximately 300 Chinese engineers from India, further hindering ...[Details]
White light LEDs are voltage-sensitive devices. In actual operation, their upper limit is 20mA. However, the current often increases due to various reasons during use. If no protective measures are...[Details]
The Automotive Testing and Quality Assurance Expo (ATE 2025) will open on August 27th. At the expo, Rohde & Schwarz (R&S) will showcase six automotive testing solutions, themed "Intelligently Drivi...[Details]
For autonomous vehicles to safely navigate the road, they must identify far more complex objects than just traffic lights, pedestrians, and other familiar objects. Among these obstacles is a crucia...[Details]
There are basically three causes of spontaneous combustion of electric vehicles: The first is that the battery components are punctured or suffer fatal damage due to a collision accident, and part ...[Details]
A patent disclosed by Ford proposes replacing traditional segmented side curtain airbags with integrated full-width side curtain airbags that span the side of the vehicle and can be deployed simult...[Details]
A pure sine wave inverter has a good output waveform with very low distortion, and its output waveform is essentially the same as the AC waveform of the mains power grid. In fact, the AC power prov...[Details]
With the advancement of science and technology and the promotion of green, energy-saving, and circular development, the demand for precise control and accurate measurement is increasing. In the pow...[Details]
Batteries, at the core of new energy vehicles, are crucial to vehicle performance and range. Existing automotive batteries are categorized into lead-acid and lithium batteries. Currently, new energ...[Details]
introduction
The rapid development of science and technology has enabled mankind to quickly move from the Internet era to the big data era. As a result, the amount of data generated by people ...[Details]
0 Introduction
With a rapidly aging population, a young couple is now required to care for an increasing number of elderly people, leading to a growing difficulty in providing care for them. E...[Details]
With the growth of the Internet of Things (IoT), wearable, and portable devices, consumers are growing weary of cluttered cables and the need for frequent battery recharges. The benefits of wireles...[Details]