LUXEON Z
Color Portfolio
Introduction
LUXEON® Z is a broad portfolio of color and white LEDs that enable never
before seen lumen density, flexibility and freedom of design. Available in the full
spectrum of colors from 440nm to 670nm and a complete selection of white
color temperatures, LUXEON Z is ideal for entertainment/stage lighting, indoor
and outdoor architectural lighting, emergency vehicle lighting, remote phosphor
applications and a wide variety of specialty lighting applications.
Features
•
2.2 mm
2
micro footprint
•
Undomed
•
Tested and Binned at 500 mA
•
Up to 1A max drive current
•
Up to 150°C max T
j
Benefits
•
Industry’s leading lm/mm
2
for high flux
density solutions
•
Highest degree of design flexibility
•
Superior color mixing and beam
control through choice of optics
•
Enables customizable light sources:
linear, rectangular, circular.
Key Applications
•
Architecture
- Entertainment
- Studio
•
Lamps
- Remote Phosphor
•
Specialty
- Emergency Vehicle
LUXEON Z DS105 ©2014 Philips Lumileds Lighting Company.
Table of Contents
General Information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2
Product Selection & Optical Characteristics. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3
Flux Performance, Binning, and Supportability . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4
Electrical Characteristics . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5
Absolute Maximum Ratings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .6
JEDEC Moisture Sensitivity . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .6
Reflow Soldering Characteristics. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7
Mechanical Dimensions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8
Pad Configuration. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11
Solder Pad Design . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11
Wavelength Characteristics . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12
Typical Light Output Characteristics. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13
Typical Forward Current Characterisics . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14
Typical Relative Luminous Flux . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15
Typical Radiation Patterns:. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16
Emitter Pocket Tape Packaging . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19
Emitter Reel Packaging . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 21
Luminous Flux Bins. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .22
Forward Voltage Bins . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .23
Color Bins . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .24
LUXEON Z Datasheet DS105 20140214 ©2014 Philips Lumileds Lighting Company.
i
General Information
Product Nomenclature
LUXEON Z Color emitters are tested and binned at 25°C or 85°C, 500 mA, depending on the product.
The part number designation for LUXEON Z Color LEDs is explained as follows:
LXZ1-ABCD-EFGH
Where:
A — designates radiation pattern (value P for lambertian)
B — designates color (see LUXEON Z color binning and labeling section)
C — designates color variant (0 for color variants)
D — designates color version (1, 2, etc.)
E — open slot to accommodate additional requirements per product and part number
FGH — (optional) minimum luminous flux (lm) or radiometric power (mW) performance
Please see DS120 for LUXEON Z White part number designation.
LUXEON Z Datasheet DS105 20140214 ©2014 Philips Lumileds Lighting Company.
2
Product Selection & Optical Characteristics
Product Selection Guide for LUXEON Z Color
Junction Temperature = 25°C
Table 1.
Performance @ 500 mA
Color
Part Number
Minimum Luminous
Flux (lm) or Radiometric
Power (mW)
104
96
88
80
64
56
48
40
32
24
600
550
500
350
300
56
48
40
72
64
56
64
56
48
Typical Efficacy
(lm/W) or
Radiant Efficacy
71
63
59
54
44
39
35
30
26
21
43%
40%
37%
34%
32%
54
50
42
69
63
57
63
57
51
Performance @ 700 mA
Typical Luminous Flux
(lm) or Radiometric
Power (mW)
128
120
113
103
84
74
67
57
49
39
823
757
704
454
416
77
70
60
99
90
82
90
82
73
Typical Efficacy
(lm/W) or
Radiant Efficacy
61
53
50
46
38
33
30
27
23
19
40%
37%
35%
31%
29%
49
46
38
66
58
53
59
53
48
Green
LXZ1-PM01
Cyan
LXZ1-PE01
Blue
LXZ1-PB01
Royal Blue
Deep Red
Red
LXZ1-PR01
LXZ1-PA01
LXZ1-PD01
Red-Orange
LXZ1-PH01
Amber
LXZ1-PL01
Notes for Table 1:
1. Minimum luminous flux or radiometric power performance guaranteed within published operating conditions. Philips Lumileds maintains a tolerance of ± 6.5% on flux and
power measurements.
2. Typical luminous flux or radiometric power performance when device is operated within published operating conditions.
Product Selection Guide for LUXEON Z Color
Junction Temperature = 85°C
Table 2.
Performance @ 500 mA
Color
Part Number
Minimum Luminous
Flux (lm)
184
174
164
154
144
Typical Efficacy
(lm/W)
131
124
118
113
107
Performance @ 700 mA
Typical Luminous Flux
(lm)
245
233
221
212
200
Typical Efficacy
(lm/W)
124
118
111
107
100
Lime
LXZ1-PX01
Notes for Table 2:
1. Minimum luminous flux or radiometric power performance guaranteed within published operating conditions. Philips Lumileds maintains a tolerance of ± 6.5% on flux and power
measurements.
2. Typical luminous flux or radiometric power performance when device is operated at specified conditions.
LUXEON Z Datasheet DS105 20140214 ©2014 Philips Lumileds Lighting Company.
3
Flux Performance, Binning, and Supportability
LEDs are produced with semiconductor technology that is subject to process variation, yielding a range
of flux performance that is approximately Gaussian in nature. In order to provide customers with fine
granularity within the overall flux distribution, Philips Lumileds separates LEDs into fixed, easy to design
with, minimum luminous flux bins. To verify supportability of parts chosen for your application design,
please consult your Philips Lumileds sales representative.
Volume
Luminous Flux Bins
Optical Characteristics
LUXEON Z Color at 500 mA, Test Temperature
Table 3.
Dominant Wavelength
[1]
,
l
D
or Peak Wavelength
[2]
,
l
P
(nm)
Min
Green
[6]
Cyan
[6]
Blue
[6]
Royal Blue
[2] [6]
Red
[7]
Deep Red
[2] [7]
Red-Orange
[7]
Amber
[7]
Lime
[8]
LXZ1-PM01
LXZ1-PE01
LXZ1-PB01
LXZ1-PR01
LXZ1-PD01
LXZ1-PA01
LXZ1-PH01
LXZ1-PL01
LXZ1-PX01
520.0
490.0
460.0
440.0
620.0
650.0
610.0
585.0
566.0
Typ
530.0
505.0
470.0
447.5
627.0
655.0
617.0
590.0
567.5
Max
540.0
510.0
480.0
460.0
645.0
670.0
620.0
595.0
569.0
Typical
Spectral
Half-width
[3]
(nm)
Dl
1/2
30
30
20
20
20
20
20
20
100
Typical Temp
Coefficient of
Dominant or
Peak Wavelength
(nm/°C)
Dl
D
/
DT
J
0.04
0.03
0.03
0.03
0.06
0.06
0.06
0.10
0.01
Typical
Total
Included
Angle
[4]
(degrees)
u
90V
140
140
140
140
150
150
150
150
140
Typical
Viewing
Angle
[5]
(degrees)
2u
½
125
125
125
125
145
145
145
145
125
Color
Part Number
Notes for Table 3:
1. Dominant wavelength is derived from the CIE 1931 Chromaticity diagram and represents the perceived color.
Philips Lumileds maintains a tolerance of ± 0.5 nm for dominant wavelength measurements.
2. Royal Blue and Deep Red LEDs are binned by radiometric power and peak wavelength rather than photometric lumens.
Philips Lumileds maintains a tolerance of ± 2nm for peak wavelength measurements.
3. Spectral width at
½
of the peak intensity.
4. Total angle at which 90% of total luminous flux is captured.
5. Viewing angle is the off axis angle from lamp centerline where the luminous intensity is
½
of the peak value.
6. Green, cyan, blue, royal blue, lime and white products are built with Indium Gallium Nitride (InGaN).
7. All red, deep red, red-orange, and amber are built with Aluminum Indium Gallium Phosphide (AlInGaP).
8. LUXEON Z Lime is tested and binned at T
j
= 85°C. All other LUXEON Z Color emitters are tested and binned at T
j
= 25°C.
LUXEON Z Datasheet DS105 20140214 ©2014 Philips Lumileds Lighting Company.
4
京公网安备 11010802033920号
EEWORLD
