769D (CECC 30202-013)
www.vishay.com
Vishay
Wet Tantalum Capacitors with Epoxy End-Fill, Sintered Anode,
T
ANTALEX®
Capacitors, CECC 30202-013 Approved
FEATURES
• Axial through-hole terminations: Standard
tin/lead (SnPb), 100 % tin (RoHS compliant)
available
• For 125 °C operation
• Very high CV per unit volume
• Long shelf life in excess of ten years
• Extremely low leakage current
• Epoxy end-filled for better shock and vibration
performance
• Material categorization: For definitions of compliance
please see
www.vishay.com/doc?99912
Note
*
Lead (Pb)-containing terminations are not RoHS-compliant.
Exemptions may apply.
PERFORMANCE CHARACTERISTICS
Operating Temperature:
- 55 °C to + 125 °C
Capacitance Tolerance:
± 20 % is standard; ± 10 % and
± 5 % available as specials
Capacitance Range:
3.6 μF to 2200 μF
Life Test:
Capacitors are capable of withstanding a 2000 h
life test at a temperature of + 85 °C or + 125 °C at the
applicable rated DC working voltage.
APPROVALS
• CECC 30202-013 (6 V to 125 V)
APPLICATIONS
Designed
for
industrial
and
telecommunications
applications, offers higher microfarad value per unit volume
than any other type. The epoxy resin end-fill construction
also offers improved mechanical strength, outstanding
resistance to temperature cycling, and trouble-free
application when flow-soldering capacitors to printed circuit
board.
ORDERING INFORMATION
769D
MODEL
306
CAPACITANCE
This is expressed
in picofarads.
The first two
digits are the
significant figures.
The third is the
number of zeros
to follow
X0
CAPACITANCE
TOLERANCE
X0 = ± 20 %
X9 = ± 10 %
X5 = ± 5 %
special order
006
DC VOLTAGE RATING
AT + 85 °C
This is expressed
in volts. To complete
the three-digit block,
zeros precede the
voltage rating
A
CASE
CODE
See
Ratings
and Case
Codes
table
2
STYLE NUMBER
0 = Bare case
2 = Outer plastic-film
insulation
E3
RoHS COMPLIANT
E3 = Tin termination
(RoHS compliant design)
Blank = SnPb termination
(standard design)
Note
• Packaging: The use of formed plastic trays for packaging these axial lead components is standard. Tape and reel is not recommended due
to the unit weight
DIMENSIONS
in inches [millimeters]
Epoxy resin
+
Ød
L
2
L
1
L
2
D
CASE CODE
A
B
C
D
L
1
+ 031/- 0.078 [+ 0.8/- 2.0]
0.535 [13.6]
0.724 [18.4]
0.846 [21.5]
1.129 [28.7]
WITH OUTER PLASTIC-FILM INSULATION
D
L
2
± 0.015 [± 0.4]
0.192 [4.9]
0.984 [25]
0.283 [7.2]
0.984 [25]
0.377 [9.6]
0.984 [25]
0.377 [9.6]
0.984 [25]
Ød
+ 10 %
± 0.002 [- 0.05]
0.023 [0.6]
0.023 [0.6]
0.023 [0.6]
0.023 [0.6]
Revision: 14-Mar-12
Document Number: 40055
1
For technical questions, contact:
tantalum@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT
www.vishay.com/doc?91000
Embedded System
京公网安备 11010802033920号
EEWORLD
