600H and 600NH series
Toggle switches - high amperage
Distinctive features and specifications
❑
Construction
Terminal and contact support are manufactured from a single piece of metal. The
contacts are resistance-welded to the terminal for increased mechanical strength.
❑
Rating
A
These switches are suitable for motor loads and power applications up to
15A 250VAC or 10A 400VAC
❑
Metal or insulated lever
❑
UL, CSA and NF-VDE (EN 61058-1) approved
ELECTRICAL SPECIFICATIONS
• Max. current/voltage ratings : see tables below
• Peak current : 30A max. during 1/2 sine, 250VAC
• Initial contact resistance : 10 mΩ max. at 1A 2VDC
• Insulation resistance : 1.000 MΩ min. at 500VDC
• Dielectric strength :
2.000 Vrms 50 Hz min. between terminals
2.500 Vrms 50 Hz min. between terminals and frame
• Electrical life : 10.000 cycles at full load
APPROVED RATINGS
600H - 600NH
MODELS
FUNCTIONS
UL
UL 1054
- FOR INFORMATION-
Max. current/voltage rating w. resistive load
Functions
ON - OFF
ON - ON
ON OFF ON
Ratings
Electrical life
CSA
CSA 22-2
NF-VDE
EN 61058-1
ON - OFF (1)
Single and
double pole
ON - ON (6)
Other
(4-5-7-8-9)
ON - OFF (1)
& ON - ON (6)
15A 1/2 HP
125-250VAC
10A 1/2 HP
125-250VAC
15A 1/2 HP
125-250VAC
10A 1/2 HP
125-250VAC
10(4)A
400VAC
T 85/55 (600H)
T 125/55
(600NH)
15A 250VAC
10A 24VDC 10.000 cycles
15A 12VDC
15A 250VAC
6.000 cycles
Other
15A 125VAC
12A 250VAC 10.000 cycles
5A 25VDC
Three pole
Other
(4-5-7-8-9)
MATERIALS
GENERAL SPECIFICATIONS
• Case : polyester UL94-V0
• Actuator :
- 600H : brass, nickel plated
- 600NH : black polyamide
• Bushing : brass, nickel plated
• Contacts : silver/nickel alloy
• Torque : 1,50 Nm (1.10 Ft.lb) max. applied to nut
• Panel thickness : 4,5 mm (.177) max. between 2 nuts
• Operating temperature : -20°C to +55°C
A-100
www.apem.com
APEM
600H and 600NH series
Toggle switches - high amperage
Specifications
AGENCY APPROVALS
MOUNTING RECOMMENDATIONS
Connection
• For quick-connect terminals, use 6,3 x 0,8 mm
normalized female connectors.
• For screw terminals, use :
either 1,5 mm
2
or 2,5 mm
2
rigid wires,
or prepared stripped and tin plated flexible wires,
or prepared flexible wires with crimped termination per
EN 50027 (DIN 46228)
Ground connector
Compulsory if the panel is not metallic or not connected
to ground. Should also be used when front face nut is of
plastic material.
Order separately, see section I.
EN 61058-1
EN 61058-1
Availability
: see chart on previous page.
Marking
: approved models are standard marked.
PANEL CUT
-
OUT
Ø12.20
(.48DIA)
Ø12.20
(.48DIA)
Ø12.50
(.492DIA)
A
APEM
5.10
(.20)
1.70
(.066)
www.apem.com
9.60
(.377)
Ø3.50
(.137DIA)
A-101
600H and 600NH series
Toggle switches - high amperage
Overview
6
SERIES
Number of poles
3
4
5
Single pole
Double pole
Three pole
1
5
6
7
8
9
4
Electrical functions
ON
MOM
ON
MOM
ON
ON
ON
ON
MOM
-
OFF
-
ON
-
ON
OFF MOM
OFF MOM
OFF
ON
ON
ON
ON MOM
Δ
ON MOM
Δ
H
H/2
NH
NH/2
NH/3
Actuator and terminals
Metal lever, screw terminals
Metal lever, solder lug/quick-connect
terminals
Insulated lever, screw terminals
Insulated lever, solder lug/quick-
connect terminals
Insulated lever, normalized quick-
connect terminals
A
For 4 pole, see 600
series.
Δ
Must not have blank in
"momentary" box.
Momentary
1R
ON ON MOM
2R
MOM ON MOM
Options
For models with metal lever only
T
Tropicalized case
K
Front panel sealing
L
Bushing 16 mm (.629)
LUXE
Chrome finish
TKLUXE
Front panel sealing + T and LUXE
G
Matt black finish
GK
Matt black finish + front panel sealing
G038
Luminous tip on lever
1V
2V
3V
Locking levers
1 locked position
2 locked positions
3 locked positions
ABOUT THIS SERIES
Dimensions
: first dimensions are in mm while inches are shown as bracketted numbers.
: please note that not all combinations of above numbers are available.
Refer to the following pages for further information.
NOTICE
Security caps
are available to prevent inadvertent lever operation. They are presented in section I.
Sealing boots
are available on 600H series to protect the switches against dust and water. They are presented in section H.
Mounting accessories
: standard hardware supplied with all models :
- 600H and series : 1 hex nut U166 and 1 knurled nut U411
- 600NH series : 1 hex nut U166 and 1 knurled nut U522
Standard and special hardware are presented in section I.
Packaging unit
: 25 pieces.
A-102
www.apem.com
APEM
600H series
Toggle switches - high amperage - metal lever
Solder lug/quick-connect terminals - screw terminals
➞
Keyway
•
2 and 3 maintained or momentary positions
• Solder lug/quick-connect terminals 6,35 x 0,8 (.250 x.031)
or screw terminals + clamp
600H/2
• 1, 2 and 3 pole configurations
Ø3.10
(.122DIA)
600H
Ø3.00x0.50 SI
(.118DIAx0.50 IS)
3
2
1
4.50
(.177)
• Normalized quick-connect terminals
(/3) optional. On request.
6.35x0.80
(.25x.031)
6.35
(.25)
0.80
(.031)
A
MODEL
STRUCTURE
Single pole
III
2-1
Solder lug
631H/2
635H/2
636H/2
637H/2
638H/2
639H/2
Screw term.
631H
635H
636H
637H
638H
639H
II
I
2-3
➞
Keyway
14.00
(.551)
17.50
(.689)
10.50
(.413)
15.00
(.59)
11.00
(.433)
1
29.50
(1.161)
2
3
III
0.80
(.031)
21.40
(.846)
11.00
(.433)
24.00
(.949)
11.00
(.433)
36˚
Double pole
III
2-1
5-4
Solder lug
641H/2
644H/2
644H/2-1R
644H/2-2R
645H/2
646H/2
647H/2
648H/2
649H/2
Screw term.
641H
644H*
644H-1R*
644H-2R*
645H
646H
647H
648H
649H
ON
ON
ON
MOM
MOM
ON
MOM
ON
ON
II
I
2-3
5-6
OFF
ON
MOM
MOM
ON
ON
MOM
MOM
ON
➞
Keyway
21.50
(.846)
17.50
(.689)
10.50
(.413)
29.70
(1.169)
A3
B6
III
0.80
(.031)
0.80
(.031)
30˚
11.00
(.433)
* Function 4 : SP in DP case - see end of catalogue.
Three pole
III
2-1
5-4
8-7
Solder lug
651H/2
655H/2
656H/2
657H/2
658H/2
659H/2
Screw term.
651H
655H
656H
657H
658H
659H
II
I
2-3
5-6
8-9
➞
Keyway
34.50
(1.358)
17.50
(.689)
11.20
(.44)
1
4
7
I
3
6
9
III
26˚
12.00
(.472)
12.00
(.472)
APEM
www.apem.com
A-103
7.10
(.279)
II
ON
-
OFF
MOM -
ON
ON
-
ON
MOM OFF MOM
ON
OFF MOM
ON
OFF ON
31.80
(1.252)
2
5
8
Ø12.00x0.75 SI
(.472DIAx0.75 IS)
14.90
(.586)
6.80
(.267)
II
A2
B5
Ø12.00x0.75 SI
(.472DIAx0.75 IS)
14.65
(.578)
I
-
ON
ON
ON
-
-
OFF
OFF
OFF
A1
B4
7.10
(.279)
Ø12.00x0.75 SI
(.472DIAx0.75 IS)
14.90
(.586)
II
I
ON
-
OFF
MOM -
ON
ON
-
ON
MOM OFF MOM
ON
OFF MOM
ON
OFF ON
600H series
Toggle switches - high amperage - metal lever
OPTIONS FOR
600
H SERIES ONLY
Complete above box with desired options in the same order as below
A
T
K
Tropicalized diallylphthalate case (-40°C to +85°C)
Front panel sealing by 1 O-ring and sealing washer.
Protects the switch against water and dust. Panel seal withstands 1 bar
pressure and remains sealed even when switch is operated
Special threaded bushing, length 16 mm (.629)
Chrome plated lever and cap nut U117
Options T, K and LUXE.
Matt black finish on bushing, lever and nuts.
Includes tropicalization (option T)
Front panel sealing by O-ring and sealing washer (as described in option
TK LUXE)
+ option G
Option G + fluorescent tip on lever.
White fluorescent tip becomes luminous when submitted to ultra violet rays.
K
1
L
LUXE
TK LUXE
G
GK
2
➀
O-ring
➁
Sealing washer
0.38
G038
LOCKING LEVERS
(1 and 2 pole models)
For 3-pole models, refer to 6000 series.
➞
Keyway
19.40
(.763)
19.40
(.763)
20.40
(.811)
11.90
(.468)
-1V
1 locked position
-2V
2 locked positions
11.90
(.468)
-3V
3 locked positions
ACTUATOR OPTIONS
(1 and 2 pole models)
Ø6.00
(.236DIA)
30.00
(1.181)
40.00
(1.574)
Ø6.30
(.248DIA)
• Ergonomic flat plastic actuator : add U282 at the end of
switch model number.
-4
-5
15.00
(.590)
-6
U282
A-104
www.apem.com
26.30
(1.035)
-4
-5
-6
30 mm (1.181) long actuator
40 mm ( 1.574) long actuator
Retro style actuator
(gold plated or chrome plated : on request)
10.50
(.413)
11.90
(.468)
Ø11.90-32NS
(15/32''32NS)
Ø11.90-32NS
(15/32''32NS)
Ø11.90-32NS
(15/32''32NS)
2.80
(.110)
Ø6.00
(.236DIA)
APEM
京公网安备 11010802033920号
EEWORLD
