products under development at Spansion LLC. The information is intended to
help you evaluate this product. Do not design in this product without contacting
the factory. Spansion LLC reserves the right to change or discontinue work on
this proposed product without notice.
Publication Number
S29WS128J/064J_00
Revision
A
Amendment
3
Issue Date
February 19, 2005
This page intentionally left blank.
Publication Number
S29WS128J/064J_00
Revision
A
Amendment
3
Issue Date
February 19, 2005
S29WS128J/064J
128/64 Megabit (8/4 M x 16-Bit)
CMOS 1.8 Volt-only Simultaneous Read/Write,
Burst Mode Flash Memory
Distinctive Characteristics
Architectural Advantages
Single 1.8 volt read, program and erase (1.65 to
1.95 volt)
Manufactured on 0.11 µm process technology
Simultaneous Read/Write operation
— Data can be continuously read from one bank while
executing erase/program functions in other bank
— Zero latency between read and write operations
— Four bank architecture: WS128J: 16Mb/48Mb/48Mb/
16Mb, WS064J: 8Mb/24Mb/24Mb/8Mb
Programable Burst Interface
— 2 Modes of Burst Read Operation
— Linear Burst: 8, 16, and 32 words with wrap-around
— Continuous Sequential Burst
Secured Silicon Sector region
— 128 words accessible through a command sequence,
64words for the Factory Secured Silicon Sector and
64words for the Customer Secured Silicon Sector.
Sector Architecture
4 Kword x 16 boot sectors, eight at the top of the address
range, and eight at the bottom of the address range
—
WS128J:
4 Kword X 16, 32 Kword x 254 sectors
Bank A : 4 Kword x 8, 32 Kword x 31 sectors
Bank B : 32 Kword x 96 sectors
Bank C : 32 Kword x 96 sectors
Bank D : 4 Kword x 8, 32 Kword x 31 sectors
—
WS064J:
4 Kword x 16, 32 Kword x 126 sectors.
Bank A : 4 Kword x 8, 32 Kword x 15 sectors
Bank B : 32 Kword x 48 sectors
Bank C : 32 Kword x 48 sectors
Bank D : 4 Kword x 8, 32 Kword x 15 sectors
WS128J : 84-ball (8 mm x 11.6 mm) FBGA package,
WS064J : 80-ball (7 mm x 9 mm) FBGA package
Cyclling Endurance : 1,000,000 cycles per sector
typical
Data retention : 20-years typical
ADVANCE
INFORMATION
Performance Characteristics
Read access times at 80/66 MHz
— Burst access times of 9.1/11.2 ns @ 30 pF at
industrial temperature range
— Synchronous latency of 71/56 ns (at 30 pF)
— Asynchronous random access times of 55/55 ns (at
30 pF)
Power dissipation (typical values, C
L
= 30 pF)
— Burst Mode Read: 18 mA @ 80Mhz
— Simultaneous Operation: 60 mA @ 80Mhz
— Program/Erase: 15 mA
— Standby mode: 0.2 µA
Hardware Features
Handshaking feature available
— Provides host system with minimum possible latency
by monitoring RDY
Hardware reset input (RESET#)
— Hardware method to reset the device for reading
array data
WP# input
— Write protect (WP#) function allows protection of
four outermost boot sectors, regardless of sector
protect status
Persistent Sector Protection
— A command sector protection method to lock
combinations of individual sectors and sector groups
to prevent program or erase operations within that
sector
— Sectors can be locked and unlocked in-system at V
CC
level
Password Sector Protection
— A sophisticated sector protection method to lock
combinations of individual sectors and sector groups
to prevent program or erase operations within that
sector using a user-defined 64-bit password
ACC input: Acceleration function reduces
programming time; all sectors locked when ACC =
V
IL
CMOS compatible inputs, CMOS compatible outputs
Low V
CC
write inhibit
Publication Number
S29WS128J/064J_00
Revision
A
Amendment
3
Issue Date
February 19, 2005
This document contains information on a product under development at Spansion, LLC. The information is intended to help you evaluate this product. Do not design in
this product without contacting the factory. Spansion reserves the right to change or discontinue work on this proposed product without notice.
A D V A N C E
Software Features
Supports Common Flash Memory Interface (CFI)
Software command set compatible with JEDEC
42.4 standards
— Backwards compatible with Am29BDS, Am29BDD,
Am29BL, and MBM29BS families
Data# Polling and toggle bits
— Provides a software method of detecting program
and erase operation completion
Erase Suspend/Resume
— Suspends an erase operation to read data from, or
program data to, a sector that is not being erased,
then resumes the erase operation
Unlock Bypass Program command
— Reduces overall programming time when issuing
multiple program command sequences
I N F O R M A T I O N
4
S29WS128J/064J
S29WS128J/064J_00_A3_E
February 19, 2005
A D V A N C E
I N F O R M A T I O N
Notice On Data Sheet Designations
Spansion LLC issues data sheets with Advance Information or Preliminary designations to advise
readers of product information or intended specifications throughout the product life cycle, in-
cluding development, qualification, initial production, and full production. In all cases, however,
readers are encouraged to verify that they have the latest information before finalizing their de-
sign. The following descriptions of Spansion data sheet designations are presented here to high-
light their presence and definitions.
Advance Information
The Advance Information designation indicates that Spansion LLC is developing one or more spe-
cific products, but has not committed any design to production. Information presented in a doc-
ument with this designation is likely to change, and in some cases, development on the product
may discontinue. Spansion LLC therefore places the following conditions upon Advance Informa-
tion content:
“This document contains information on one or more products under development at Spansion LLC. The
information is intended to help you evaluate this product. Do not design in this product without con-
tacting the factory. Spansion LLC reserves the right to change or discontinue work on this proposed
product without notice.”
Preliminary
The Preliminary designation indicates that the product development has progressed such that a
commitment to production has taken place. This designation covers several aspects of the prod-
uct life cycle, including product qualification, initial production, and the subsequent phases in the
manufacturing process that occur before full production is achieved. Changes to the technical
specifications presented in a Preliminary document should be expected while keeping these as-
pects of production under consideration. Spansion places the following conditions upon Prelimi-
nary content:
“This document states the current technical specifications regarding the Spansion product(s) described
herein. The Preliminary status of this document indicates that product qualification has been completed,
and that initial production has begun. Due to the phases of the manufacturing process that require
maintaining efficiency and quality, this document may be revised by subsequent versions or modifica-
tions due to changes in technical specifications.”
Combination
Some data sheets will contain a combination of products with different designations (Advance In-
formation, Preliminary, or Full Production). This type of document will distinguish these products
and their designations wherever necessary, typically on the first page, the ordering information
page, and pages with DC Characteristics table and AC Erase and Program table (in the table
notes). The disclaimer on the first page refers the reader to the notice on this page.
Full Production (No Designation on Document)
When a product has been in production for a period of time such that no changes or only nominal
changes are expected, the Preliminary designation is removed from the data sheet. Nominal
changes may include those affecting the number of ordering part numbers available, such as the
addition or deletion of a speed option, temperature range, package type, or V
IO
range. Changes
may also include those needed to clarify a description or to correct a typographical error or incor-
rect specification. Spansion LLC applies the following conditions to documents in this category:
“This document states the current technical specifications regarding the Spansion product(s) described
herein. Spansion LLC deems the products to have been in sufficient production volume such that sub-
sequent versions of this document are not expected to change. However, typographical or specification
corrections, or modifications to the valid combinations offered may occur.”
Questions regarding these document designations may be directed to your local AMD or Fujitsu
[color=blue]NO.1[/color] The minimum cross-sectional area requirement of the insulated conductor core can be quickly obtained through the following jingle: (Unit: square millimeter) [jingle]: Ten is f...
Chapter 1 Overview 1.1 Basic Concepts of Digital Signal Processors Digital Signal Processor (DSP) is a microprocessor that is specifically used to implement various digital signal processing algorithm...
After watching Liu Qingxiang's 51 single-chip microcomputer teaching video, I feel that I have some understanding of 51. What should I do next to improve myself?...
In parking lots of medium or larger sizes, there will be problems of tight parking spaces and difficulty in parking. The use of this solution can alleviate the problem of difficulty in finding parking...
Do you have any friends who studied computer science abroad and continued to develop embedded systems? Can you share their experiences? What do you think of studying embedded systems abroad? Some peop...
In recent years, as energy consumption and environmental protection issues have attracted people's attention, my country's solar photovoltaic power generation industry has shown a rapid development...[Details]
On April 19, it was reported that Alibaba DAMO Academy is developing a neural network chip, Ali-
NPU
, which is mainly used for
AI
reasoning calculations such as image and video analys...[Details]
In our common sense, the word technology often has two definitions. The first is the technology sealed in the laboratory. They are like flowers on the mountain top. Only a few people on the mountai...[Details]
1. Purpose In actual product release, if the program stored in the MCU Flash is not protected, some illegal companies may read the program in the Flash through an emulator (J-Link, ST-Link, e...[Details]
In the actual project development process, it is common to encounter modifications to the hardware circuit, and then the modified part requires the modification of the driver. Thinking about the comi...[Details]
background After the hardware engineer completed the PCB and schematic design, the routine was modified according to the tutorial of Zhengdian Atom to verify the correctness of the hardware. STM32F...[Details]
LAN8720 configuration: IP: 192.168.192.30 Gateway: 192.168.192.1 A high frequency of ARP packets is detected The content of the packet asks for the mac address of 192.168.192.1, and asks the resp...[Details]
After studying the F4 FSMC method to drive the touch screen for a few days, I have gained some understanding, which are listed below. The unorganized record is only for my own reference in the future...[Details]
1. Initial understanding of FSMC: FSMC consists of 4 modules: (1) AHB interface (including FSMC configuration register) (2) NOR flash memory and PSRAM controller (when driving LCD, LCD is like a PSRA...[Details]
Nowadays, everyone is saying that "technology is people-oriented". The essence of the development of technology is to serve the improvement of the quality of life of human beings. Automated driving...[Details]
This paper proposes a design scheme for an embedded CNC system based on ARM and FPGA. The software and hardware design of the ARM system, the implementation method of hardware fine interpolation ...[Details]
As photovoltaic power stations come into people's view, people are paying more and more attention to them. Recently, some netizens asked me how to match the inverter and components of photovoltaic ...[Details]
On May 8,
Google
I/O 2018 Developer Conference was held as scheduled in Mountain View, California. In the second year of the full promotion of the "AI first" strategy, artificial intelligen...[Details]
At the beginning, I used the stdlib library. Recently, I found that the cube library is more and more widely used, so I started to use the cube library to complete the ADC multi-channel acquisition e...[Details]
The analog watchdog of the ADC is used to check if the voltage is out of bounds. It has two upper and lower bounds, which can be set in the registers ADC_HTR and ADC_LTR respectively. The library fun...[Details]
Power technology
京公网安备 11010802033920号
EEWORLD
