AC/DC Power Supplies
TIW Series, 4 – 24 Watt
Features
◆
High efficiency switching power supplies
◆
Easy installation into standard flush boxes
◆
Fully encapsulated plastic housing
◆
Dust and waterproof to IP 67
◆
Protection class ll
◆
Safety approval to IEC/EN 60950-1
EN 50178, EN 60335-1, UL 1310 class 2
CB
Scheme
◆
Universal input range 93 to 264 VAC
◆
Regulated output voltage
(models from 3.3 to 24 VDC)
◆
Operating temp. range –25°C to +50°C
◆
Short circuit and overload protection
◆
3-year product warranty
(Mounted in standard flush box)
The TIW series is a new range of small size DC-power supplies which have been
designed particularly for applications in home and office installations.
The compact modules cases fit in the standardized in-wall flush boxes or also can
be mounted on walls. For connection there are models available with flying wires
The power supplies comply fully with the safety and EMC standards requested for
commercial and residential class ll installations. Typical applications are powering of
electric devices used in home automation and in security systems like i.e. DC-motors,
controllers, indicators, etc.
Models
Order Code
TIW 06-103
TIW 06-105
TIW 06-106
TIW 12-112
TIW 12-115
TIW 12-124
TIW 24-112
TIW 24-124
Output Power max.
4W
5W
6W
12 W*
12 W*
12 W*
24 W*
24 W*
Output Voltage
3.3 VDC
5.0 VDC
6.0 VDC
12 VDC
15 VDC
24 VDC
12 VDC
24 VDC
Output Current
1.2 A
1.0 A
1.0 A
1.0 A
0.8 A
0.5 A
2.0 A
1.0 A
Efficiency
75 %
75 %
80 %
80 %
80 %
80 %
83 %
85 %
* If these models are used with 115 VAC input voltage, a 25% load reduction must be applied.
http://www.tracopower.com
Page 1 of 3
AC/DC Power Supplies
TIW Series
Input Specifications
Input voltage range
– nominal
– ranges
– output power derating for 12 & 24 W models
115 – 230 VAC
93 – 264 VAC
(universal input)
0.45 %/V below 187 VAC down to 132 VAC
1 %/V below 115 VAC
47 – 63 Hz
< 300 mW
2.0 A slow blow
EN 61000-3-2, Class A
±3 % max.
– Input variation
– Load variation (0–100%)
1 % max.
2 % max.
<200 mVp-p
TIW 06-xxx & TIW 24-xxx models:
<2.5 A
TIW 12-xxx models:
<3.5 A
foldback
(automatic recovery)
–25°C to +50°C
built in
www.tracopower.com/products/tiw-mtbf.pdf
5 – 95 % rel. H max.
– Vin = 115 VAC
– Vin = 230 VAC
– safety of information technology equipment
5 ms typ.
20 ms typ.
<1s
IEC/EN 60950-1, UL Std. 60950-1 (2nd Edition)
+Am1:2011, CAN/CSA-C22.2 No. 60950-
1-07 +Am1:2011
UL 1310 (6th Edition), CAN/CSA-C22.2 No.
223-M91(R2008) Outputs
EN 50178
EN 60335-1
www.tracopower.com/products/tiw-cb.pdf
www.tracopower.com/products/tiw-gs.pdf
www.tracopower.com/products/tiw-bg.pdf
www.tracopower.com/products/tiw-csa.pdf
EN 61000-6-3
EN 55022 class B
EN 55022 class B
EN 61000-6-2-1,
EN 61000-4-2
EN 61000-4-3
EN 61000-4-4
EN 61000-4-5
EN 61000-4-5
EN 61000-4-5
EN 61000-4-6
EN 61000-4-11
IEC 61204-3
4 kV / 8 kV
3 V/m
1 kV / 0.5 kV
2 kV
1 kV
0.5 kV
3V
30 % /10 mS, 60 % /100 mS
4 – 24 Watt
Input frequency
No load power consumption
(acc. ErP directive EC No.278/2009)
External input fuse required
(recommended values)
Harmonic limits
Output Specifications
Voltage set accuracy
Regulation
Ripple and noise
(20 Mhz Bandwidth)
Overload protection by current limit
Short circuit protection
General Specifications
Operating Temperature
Over temperature protection
Reliability, calculated MTBF according to IEC 61709
Humidity
(non condensing)
Hold-up time
Start-up time
Safety standards
– Standard for Class 2 Power Units
– Electronic equipment for use in power installations
– Safety of household and similar electrical appliances
Safety approvals
–
–
–
–
CB report according IEC/EN 60950-1
GS certification (for other standards)
BG certificate
CSA certificate
Electromagnetic compatibility (EMC), emissions
– Conducted RI suppression on input
– Radiated RI suppression
Electromagnetic compatibility (EMC), immunity
– Electrostatic discharge (ESD)
– Radiated RF field immunity
– Electrical fast transient / burst immunity
– Surge immunity line – ground
– Surge immunity line – line
– Surge immunity output
– Immunity to conducted RF disturbances
– Mains voltage dips and interruptions
All specifications valid at nominal input voltage, full load and +25°C after warm-up time unless otherwise stated.
http://www.tracopower.com
Page 2 of 3
AC/DC Power Supplies
TIW Series
General Specifications
Protection class
Casing material
Casing protection
Environment
Connection wires
Environmental compliance
Weight
– Vibration acc. IEC 60068--2-6
– Shock acc. IEC 60068-2-27
– Input
– Output
– Reach
– RoHS
class II as per IEC/EN 61140
plastic
(UL 94V-0 rated)
IP 67
Part 2, test Fe: Vibration (sinusoidal)
Part 2, test Ea: Shock
2 x 570 mm +30/-0 (black/white) AWG 18
2 x 200 mm +20/-0 (red/black) AWG 20
www.tracopower.com/products/tiw-reach.pdf
RoHS directive 2011/65/EU
– 24 Watt models:
100 g
(3.8 oz)
– other models:
80 g
(2.7 oz)
4 – 24 Watt
Outline Dimensions
TIW 6 & 12 Watt models:
TIW 24 Watt model:
63
55
.0
.0
8mm
8mm
40mm
23.5
3.2
R
31
20.5
3.2
R
.5
.5
27
570mm (+30/-0)
600mm
Flat 2-core cable 16 -18AWG.
Outer insulation 3.5mm x 7.0mm typ.
23.5
20.5
3.2
3.2
Flat 2-core cable 16 -18AWG.
Outer insulation 3.5mm x 7.0mm typ.
12.5
12.5
48.0
15.4
15.4
56.0
N L
Bottm View
Input
4.5
Bottm View
Input
N L
4.0
52.0
Output
52.0
Ø 1 .8
Ø 1 .8
200mm
20AWG/BLACK
4.5
32.0
5.0±2
+-
Output
+-
Ø 1 .8
Ø 1. 8
200mm
(+20/-0)
4.0
23.6
20AWG/RED
20AWG/BLACK
Side View
20AWG/RED
5.0±2
Side View
Tolerances: ±0.2mm
5.7
5.7
Top Side
Tolerances: ±0.2mm
Top Side
Specifications can be changed without notice! Make sure you are using the latest documentation, downloadable at www.tracopower.com
www.tracopower.com
Rev. December 09. 2013
Page 3 of 3
Electronics Design Contest
京公网安备 11010802033920号
EEWORLD
