8168SHAV2ME2 datasheet, PDF - EEWORLD Datasheet

Datasheet> All Categories > Mechanical and electronic products> switch> 8168SHAV2ME2

8168SHAV2ME2: DescriptionPUSHBUTTON SWITCH,RIGHT ANGLE,SPDT,ON-(ON),PC TAIL TERMINAL,5; CategoryMechanical and electronic products switch; File Size709KB，10 Pages; ManufacturerC&K

Download Datasheet Parametric Compare View All

8168SHAV2ME2 Overview

PUSHBUTTON SWITCH,RIGHT ANGLE,SPDT,ON-(ON),PC TAIL TERMINAL,5

8168SHAV2ME2 Parametric

Parameter Name	Attribute value
Maker	C&K
Reach Compliance Code	compliant
ECCN code	EAR99
Switch type	PUSHBUTTON SWITCH

8168SHAV2ME2 Preview

8060 Series

Alternate Action and Momentary Pushbutton Switches

Pushbutton

Features/Benefits

•

Long travel

•

Available with LED

•

Long life contact design

•

Epoxy terminial seal

compatabile with bottom

wash cleaning

•

RoHS compliant models

available

Specifications

CONTACT RATING: Q contact material: 6 AMPS @ 120 V AC

or 28 V DC; 3 AMPS @ 250 V AC. See page A-59 for

additional ratings.

ELECTRICAL LIFE: 50,000 make-and-break cycles at full load.

CONTACT RESISTANCE: Below 20 mΩ typ. initial @

2-4 V DC, 100 mA, for both silver and gold plated contacts.

INSULATION RESISTANCE: 109

Ω

min.

DIELECTRIC STRENGTH: 1,000 Vrms min. @ sea level.

OPERATING TEMPERATURE: –30ºC to 65ºC

SOLDERABILITY: Per MIL-STD-202F method 208D, or

EIA RS-186E method 9 (1 hour steam aging).

CAP INSTALLATION FORCE: 10 lbs. maximum permissible.

NOTE:

Any models supplied with P, R, S, Q, B or G contact material are RoHS compliant.

NOTE:

Specifications and materials listed above are for switches with standard options.

For information on specific and custom switches, consult Customer Service Center.

Typical Applications

•

Instrumentation

•

Computers and peripherals

•

Telecommunications and

networking equipment

Models Available

Materials

CASE: Glass filled nylon 6/6 or diallyl phthalate (DAP),

flame retardant (UL 94V-0).

PLUNGER: S, S1, S2 Options: Glass filled nylon or glass filled

polyester (PBT) (UL 94V-0). L, L1 Options: Brass, nickel plated.

CAP & FRAME: Nylon, black standard.

BUSHING: Brass or zinc, nickel plated.

HOUSING: Stainless steel.

SWITCH SUPPORT: Brass or steel, matte-tin plated.

END CONTACTS: Q contact material: Coin silver, silver plated.

See page A-59 for additional contact materials.

CENTER CONTACT & ALL TERMINALS: Q contact material: Copper

alloy, silver plated. See page A-59 for additional contact materials.

TERMINAL SEAL: Epoxy. Refer to soldering and cleaning

in Technical Data Chapter.

HARDWARE: Nut & Locking Ring: Brass, nickel plated;

Lockwasher: Steel, nickel plated.

Build-A-Switch

To order, simply select desired option from each category and place in the appropriate box. Available options are shown

and described on pages A-53 thru A-61. For additional options not shown in catalog, consult Customer Service Center. All

models have epoxy terminal seal and are compatible with all “bottom-wash” PCB cleaning methods.

Switch Function

8161

SPDT On-On

8168

SPDT On-Mom.

8261

DPDT On-On

Actuator or Plunger

.710"

high plunger

with .375" dia. cap

J80

Snap-in

J81

Snap-in with frame

J82

Snap-in with frame for LED

J86

Snap-in with frame & LED

.740" high plunger with

.395" dia. cap

.740" high plunger with

.590" dia. cap

.615" high plunger with

.200" dia. cap

.710" high plunger with

.310" dia. cap

Bushing

.300" high, flat, hi torque

NONE

No bushing choice required

7.6mm, keyway

Terminations

Right angle, PC thru-hole

AV2

Vertical right angle,

PC thru-hole

PC Thru-hole

Solder lug

Right angle, snap-in, PC thru-hole

AV3

Vertical right angle, snap-in,

PC thru-hole

.460" high, V-bracket

.630" high, V-bracket

.460" high, V-bracket

V21

.555" high, snap-in V-bracket

V31

.460" high, snap-in V-bracket

.750" long, wire wrap

Quick connect

Contact Material

Gold

Gold, matte-tin

Silver

Silver, matte-tin

Gold over silver

Gold over silver,

matte-tin

Seal

Epoxy

Epoxy potted base

Cap Color

Black

White

Red

Orange

Yellow

Gray

Frame Color

Black

LED Color

Red

NONE

Models without LED

Dimensions are shown: Inches (mm)

Specifications and dimensions subject to change

A–52

www.ck-components.com

8060 Series

Alternate Action and Momentary Pushbutton Switches

SWITCH FUNCTION

POS. 1

POS. 2

CONNECTED TERMINALS

POS. 1

POS. 2

Pushbutton

NO.

POLES

MODEL NO.

C&K marking this side

SCHEMATIC

8161

8168

MOM.

2-3

2-1

SPDT

Part number shown: 8161SHZQE

Terminal Nos.

For Reference Only

8261

2-3,5-6

2-1,5-4

DPDT

Part number shown: 8261SHZQE

MOM. = Momentary

All models

Terminal Nos.

For Reference Only

with all options when ordered with G, L, M or Q contact material.

CAP COLOR

ACTUATOR—SNAP-IN FRONT MOUNT

ACTUATOR OR PLUNGER

J80

SNAP-IN

PANEL MOUNTING

OPTION

CODE

CAP COLOR

BLACK

WHITE

RED

ORANGE

YELLOW

GRAY

*Increase this dimension to

.620/.625 (15,75/15,88)

for .091/.125 (2,41/2,18)

thick panels.

Cap Finish: matte.

Other colors available, consult

Customer Service Center.

Available with C, W, Z or

Z3 terminations.

NOTE:

Caps & frames available

separately, see pages A-60 and A-61.

J81

SNAP-IN WITH BLACK FRAME

PANEL MOUNTING

*Increase this dimension to

.620/.625 (15,75/15,88)

for .091/.125 (2,41/2,18)

thick panels.

Third Angle

Projection

Dimensions are shown: Inches (mm)

Specifications and dimensions subject to change

A–53

www.ck-components.com

8060 Series

Alternate Action and Momentary Pushbutton Switches

CAP COLOR

Pushbutton

J82

ACTUATOR—SNAP-IN FRONT MOUNT

ACTUATOR OR PLUNGER

SNAP-IN WITH BLACK FRAME FOR LED

Available with C, W, Z or Z3 terminations.

LED not included.

For LED information, see page A-61.

NOTE:

Caps & frames available

separately, see pages A-60 and A-61.

Other colors available, consult

Customer Service Center.

OPTION

CODE

CAP COLOR

BLACK

WHITE

RED

ORANGE

YELLOW

GRAY

CAP COLOR

LED COLOR

ACTUATOR—SNAP-IN FRONT MOUNT

J86

SNAP-IN WITH BLACK FRAME AND LED

ACTUATOR OR PLUNGER

PANEL MOUNTING

8161J86ZQE223

SPDT

Available with C, W, Z or Z3 terminations and SPDT models only.

* Increase this dimension to

.620/.625 (15,75/15,88)

for .091/.125 (2,31/3,18)

thick panels.

NOTE:

Caps & frames available

separately, see pages A-60 and A-61.

Other colors available, consult

Customer Service Center.

OPTION

CODE

CAP COLOR

BLACK

WHITE

RED

ORANGE

YELLOW

GRAY

OPTION

CODE

LED COLOR

RED

For LED information, see page A-59.

Third Angle

Projection

Dimensions are shown: Inches (mm)

Specifications and dimensions subject to change

A–54

www.ck-components.com

8060 Series

Alternate Action and Momentary Pushbutton Switches

CAP COLOR

PLUNGER

ACTUATOR OR PLUNGER

Pushbutton

PLUNGER WITH CAP P/N 8018

PLUNGER WITH CAP P/N 7527

PLUNGER WITH CAP P/N 7089

PLUNGER WITH CAP P/N 8941

PLUNGER WITH CAP P/N 8940

OPTION

CODE

CAP COLOR

BLACK

WHITE

RED

ORANGE

YELLOW

GRAY

Cap Finish: gloss. Cap supplied not installed.

Other colors available, consult Customer

Service Center.

NOTE:

When selecting plunger and cap option, bushing selection must also be made, see below.

BUSHING

.300" HIGH THREADED, FLAT

.300" HIGH UNTHREADED, FLAT

NONE

NO BUSHING CHOICE REQUIRED

(JXX ACTUATORS)

7.6mm THREADED, KEYWAY

1/4±40 UNS-2A

H bushing standard with C, W, Z or Z3 terminations.

H9 bushing standard with A, A3, AV2, AV3, or

V3-V31 terminations.

Withstands 12 in./lbs. of torque with no distortion.

NOTE:

When selecting bushing option, plunger selection must also be made, see above. No bushing option choice required when any JXX actuator option is selected.

NOTE.

Two mounting nuts, locking ring and lockwasher supplied standard with threaded bushings.

Optional mounting nut and locking ring styles and finishes available, see section “Technical Data and

Additional Hardware”.

Third Angle

Projection

Dimensions are shown: Inches (mm)

Specifications and dimensions subject to change

A–55

www.ck-components.com

8060 Series

Alternate Action and Momentary Pushbutton Switches

Pushbutton

PC THRU-HOLE

PC MOUNTING

TERMINATIONS

SOLDER LUG

SPDT and DPDT

Not available with P, S or R contact material.

QUICK CONNECT

WIRE WRAP

.750

(19,05)

SPDT and DPDT

Not available with P, S or R contact material.

Mating quick connector available;

order part number 530100000, page A-61.

SPDT and DPDT

HOLE

RIGHT ANGLE, PC THRU-

.130

(3,3)

.138

(3,51)

8161SH9ABE2

SPDT

SECTION A-A

RIGHT ANGLE, SNAP-IN, PC THRU-HOLE

PC MOUNTING

Not available with I seal.

Terminal bend radii and lead-in manufacturing option.

NOTE:

PC pattern must clear switch support leg.

Third Angle

Projection

Dimensions are shown: Inches (mm)

Specifications and dimensions subject to change

A–56

www.ck-components.com

More (Only the first 5 pages are displayed. Please Download Datasheet to view the full content.) >

8168SHAV2ME2 Related Products

	8168SHAV2ME2	8161LH9V4QE2	8161SHCQE2	8168LHWBE2	8168LHZQE2	8168S1HZQE2	8168SHAV2QE2	8168SHCQE2	8168SHV4QE2	8261SHCQE2
Description	PUSHBUTTON SWITCH,RIGHT ANGLE,SPDT,ON-(ON),PC TAIL TERMINAL,5	PUSHBUTTON SWITCH,RIGHT ANGLE,SPDT,ON-ON,PC TAIL TERMINAL,7	PUSHBUTTON SWITCH, SPDT, ALTERNATE, 6A, 28VDC, THROUGH HOLE-STRAIGHT, ROHS COMPLIANT	PUSHBUTTON SWITCH,STRAIGHT,SPDT,ON-(ON),WP STRAIGHT TERMINAL,3	PUSHBUTTON SWITCH, SPDT, MOMENTARY, 6A, 28VDC, PANEL MOUNT-THREADED, ROHS COMPLIANT	PUSHBUTTON SWITCH, SPDT, MOMENTARY, 6A, 28VDC, PANEL MOUNT-THREADED, ROHS COMPLIANT	PUSHBUTTON SWITCH,RIGHT ANGLE,SPDT,ON-(ON),PC TAIL TERMINAL,5	PUSHBUTTON SWITCH, SPDT, MOMENTARY, 6A, 28VDC, THROUGH HOLE-STRAIGHT, ROHS COMPLIANT	PUSHBUTTON SWITCH,RIGHT ANGLE,SPDT,ON-(ON),PC TAIL TERMINAL,7	PUSHBUTTON SWITCH, DPDT, ALTERNATE, 6A, 28VDC, THROUGH HOLE-STRAIGHT, ROHS COMPLIANT
Maker	C&K	C&K	C&K	C&K	C&K	C&K	C&K	C&K	C&K	C&K
Reach Compliance Code	compliant	not_compliant	not_compliant	not_compliant	not_compliant	not_compliant	not_compliant	not_compliant	compliant	not_compliant
ECCN code	EAR99	EAR99	EAR99	EAR99	EAR99	EAR99	EAR99	EAR99	EAR99	EAR99
Switch type	PUSHBUTTON SWITCH	PUSHBUTTON SWITCH	PUSHBUTTON SWITCH	PUSHBUTTON SWITCH	PUSHBUTTON SWITCH	PUSHBUTTON SWITCH	PUSHBUTTON SWITCH	PUSHBUTTON SWITCH	PUSHBUTTON SWITCH	PUSHBUTTON SWITCH
Is it Rohs certified?	-	conform to	conform to	conform to	conform to	conform to	conform to	conform to	-	conform to
Factory Lead Time	-	15 weeks	15 weeks	15 weeks	15 weeks	15 weeks	15 weeks	15 weeks	-	-
Actuator length	-	0.328 inch	0.284 inch	-	0.328 inch	0.284 inch	0.284 inch	0.284 inch	-	-
Actuator type	-	PUSHBUTTON	PLUNGER	-	PLUNGER	PLUNGER	PUSHBUTTON	PLUNGER	-	PLUNGER
Nozzle length	-	0.3 inch	0.3 inch	-	0.3 inch	0.3 inch	0.3 inch	0.3 inch	-	-
Casing type	-	UNTHREADED	1/4-40	-	1/4-40	1/4-40	1/4-40	1/4-40	-	-
center contact material	-	COPPER ALLOY	COPPER ALLOY	-	COPPER ALLOY	COPPER ALLOY	COPPER ALLOY	COPPER ALLOY	-	-
Center contact plating	-	SILVER	SILVER	-	SILVER	SILVER	SILVER	SILVER	-	-
Contact (AC) maximum rated R load	-	6A@120VAC	6A@120VAC	-	6A@120VAC	6A@120VAC	3A@250VAC	6A@120VAC	-	6A@120VAC
Maximum contact current (AC)	-	6 A	6 A	-	6 A	6 A	3 A	6 A	-	6 A
Maximum contact current (DC)	-	6 A	6 A	-	6 A	6 A	6 A	6 A	-	6 A
Contact (DC) maximum rated R load	-	6A@28VDC	6A@28VDC	-	6A@28VDC	6A@28VDC	6A@28VDC	6A@28VDC	-	6A@28VDC
Contact resistance	-	0.1 mΩ	0.1 mΩ	-	0.1 mΩ	0.1 mΩ	0.02 mΩ	0.1 mΩ	-	-
Maximum contact voltage (AC)	-	120 V	120 V	-	120 V	120 V	250 V	120 V	-	120 V
Maximum contact voltage (DC)	-	28 V	28 V	-	28 V	28 V	28 V	28 V	-	28 V
Dielectric withstand voltage	-	1000VRMS V	1000VRMS V	-	1000VRMS V	1000VRMS V	1000VRMS V	1000VRMS V	-	-
Electrical life	-	50000 Cycle(s)	50000 Cycle(s)	-	50000 Cycle(s)	50000 Cycle(s)	50000 Cycle(s)	50000 Cycle(s)	-	50000 Cycle(s)
End contact material	-	COIN SILVER	COIN SILVER	-	COIN SILVER	COIN SILVER	COIN SILVER	COIN SILVER	-	-
End contact plating	-	SILVER	SILVER	-	SILVER	SILVER	SILVER	SILVER	-	-
Shell material	-	STAINLESS STEEL	STAINLESS STEEL	-	STAINLESS STEEL	STAINLESS STEEL	STAINLESS STEEL	STAINLESS STEEL	-	-
Insulation resistance	-	1000000000 Ω	1000000000 Ω	-	1000000000 Ω	1000000000 Ω	1000000000 Ω	1000000000 Ω	-	-
JESD-609 code	-	e4	e4	e4	e4	e4	e4	e4	-	e4
Installation features	-	THROUGH HOLE-STRAIGHT	THROUGH HOLE-STRAIGHT	-	PANEL MOUNT-THREADED	PANEL MOUNT-THREADED	THROUGH HOLE-RIGHT ANGLE	THROUGH HOLE-STRAIGHT	-	THROUGH HOLE-STRAIGHT
Maximum operating temperature	-	65 °C	65 °C	-	65 °C	65 °C	65 °C	65 °C	-	65 °C
Minimum operating temperature	-	-30 °C	-30 °C	-	-30 °C	-30 °C	-30 °C	-30 °C	-	-30 °C
seal	-	EPOXY	EPOXY TERMINAL SEALED	-	EPOXY TERMINAL SEALED	EPOXY TERMINAL SEALED	EPOXY	EPOXY TERMINAL SEALED	-	EPOXY TERMINAL SEALED
Solderability	-	MIL-STD	MIL-STD	-	MIL-STD	MIL-STD	MIL-STD	MIL-STD	-	-
surface mount	-	NO	NO	-	NO	NO	NO	NO	-	NO
switch function	-	SPDT	SPDT	-	SPDT	SPDT	SPDT	SPDT	-	DPDT
Terminal surface	-	Silver (Ag)	Silver (Ag)	Gold (Au) - with Nickel (Ni) barrier	Silver (Ag)	Silver (Ag)	Silver (Ag)	Silver (Ag)	-	Silver (Ag)
Terminal length	-	0.185 inch	0.25 inch	-	0.155 inch	0.155 inch	0.125 inch	0.25 inch	-	-
Terminal material	-	COPPER ALLOY	COPPER ALLOY	-	COPPER ALLOY	COPPER ALLOY	COPPER ALLOY	COPPER ALLOY	-	-
Termination type	-	SOLDER	SOLDER	-	SOLDER	SOLDER	SOLDER	SOLDER	-	SOLDER
body width	-	-	6.86 mm	-	6.86 mm	6.86 mm	6.858 mm	6.86 mm	-	11.43 mm
body height	-	-	11.43 mm	-	11.43 mm	11.43 mm	20.32 mm	11.43 mm	-	11.43 mm
Body length or diameter	-	-	12.7 mm	-	12.7 mm	12.7 mm	12.7 mm	12.7 mm	-	12.7 mm
Switch action	-	-	ALTERNATE	-	MOMENTARY	MOMENTARY	MOMENTARY	MOMENTARY	-	ALTERNATE

Recommended Resources

X-FAB adds non-volatile memory function

Thyristor controlled energy consumption braking circuit

50W Class A and B power amplifier

Solid state relay motor drive circuit

Photoelectric relay circuit diagram

High input voltage - micropower linear regulator MAX1615 circuit diagram

Shortcut: S0 S1 S2 S3 S4 S5 S6 S7 S8 S9 SA SB SC SD SE SF SG SH SI SJ SK SL SM SN SO SP SQ SR SS ST SU SV SW SX SY SZ T0 T1 T2 T3 T4 T5 T6 T7 T8 T9 TA TB TC TD TE TF TG TH TI TJ TK TL TM TN TO TP TQ TR TS TT TU TV TW TX TY TZ U0 U1 U2 U3 U4 U6 U7 U8 UA UB UC UD UE UF UG UH UI UJ UK UL UM UN UP UQ UR US UT UU UV UW UX UZ V0 V1 V2 V3 V4 V5 V6 V7 V8 V9 VA VB VC VD VE VF VG VH VI VJ VK VL VM VN VO VP VQ VR VS VT VU VV VW VX VY VZ W0 W1 W2 W3 W4 W5 W6 W7 W8 W9 WA WB WC WD WE WF WG WH WI WJ WK WL WM WN WO WP WR WS WT WU WV WW WY X0 X1 X2 X3 X4 X5 X7 X8 X9 XA XB XC XD XE XF XG XH XK XL XM XN XO XP XQ XR XS XT XU XV XW XX XY XZ Y0 Y1 Y2 Y4 Y5 Y6 Y9 YA YB YC YD YE YF YG YH YK YL YM YN YP YQ YR YS YT YX Z0 Z1 Z2 Z3 Z4 Z5 Z6 Z8 ZA ZB ZC ZD ZE ZF ZG ZH ZJ ZL ZM ZN ZP ZR ZS ZT ZU ZV ZW ZX ZY

Popular Components