EEWORLDEEWORLDEEWORLD

Part Number

Search

BM1501-9PV2AH

Description
DC-DC Regulated Power Supply Module, 1 Output, 50W, Hybrid, METAL, CASE M02, MODULE
CategoryPower/power management    The power supply circuit   
File Size569KB,25 Pages
ManufacturerBel Fuse
Download Datasheet Parametric View All

BM1501-9PV2AH Overview

DC-DC Regulated Power Supply Module, 1 Output, 50W, Hybrid, METAL, CASE M02, MODULE

BM1501-9PV2AH Parametric

Parameter NameAttribute value
Brand NamePower-One
Is it lead-free?Contains lead
Is it Rohs certified?incompatible
MakerBel Fuse
Parts packaging codeMODULE
package instruction,
Manufacturer packaging codeCASE M02
Reach Compliance Codecompliant
ECCN codeEAR99
Analog Integrated Circuits - Other TypesDC-DC REGULATED POWER SUPPLY MODULE
Maximum input voltage70 V
Minimum input voltage14 V
Nominal input voltage30 V
JESD-30 codeR-MXMA-X
JESD-609 codee0
Number of functions1
Output times1
Maximum operating temperature71 °C
Minimum operating temperature-40 °C
Maximum output voltage15.09 V
Minimum output voltage14.91 V
Nominal output voltage15 V
Package body materialMETAL
Package shapeRECTANGULAR
Package formMICROELECTRONIC ASSEMBLY
Peak Reflow Temperature (Celsius)NOT SPECIFIED
Certification statusNot Qualified
surface mountNO
technologyHYBRID
Temperature levelOTHER
Terminal surfaceTIN LEAD
Terminal formUNSPECIFIED
Terminal locationUNSPECIFIED
Maximum time at peak reflow temperatureNOT SPECIFIED
Maximum total power output50 W
Fine-tuning/adjustable outputNO
Cassette Style
DC-DC Converters
M Series
50 Watt DC-DC (AC-DC) Converters
Wide input voltage from 8...373 V DC
1, 2 or 3 isolated outputs up to 48 V DC
4 kV AC I/O electric strength test voltage
• Extremely wide input voltage range suitable for
battery (and AC) operation
• Efficient input filter and built-in surge and transient
suppression circuitry
• Outputs individually isolated and controlled
• Outputs fully protected against overload
Safety according to IEC/EN 60950
LGA
M Series
111
4.37"
3U
Summary
The M series of DC-DC (AC-DC) converters represents a
broad and flexible range of power supplies for use in ad-
vanced industrial electronic systems. Features include high
efficiency, reliability, low output voltage noise and excellent
dynamic response to load/line changes due to individual
regulation of each output.
The converter inputs are protected against surges and tran-
sients occuring at the source lines. An input over- and
undervoltage lock-out circuitry disables the outputs if the in-
put voltage is outside the specified range. Certain types in-
clude an inrush current limitation preventing circuit break-
ers and fuses from being damaged at switch-on.
All outputs are open- and short-circuit proof and are pro-
tected against overvoltages by means of built-in suppressor
diodes. The outputs can be inhibited by a logic signal ap-
plied to the connector pin 2 (i). If the inhibit function is not
used pin 2 should be connected to pin 23 to enable the out-
puts.
LED indicators display the status of the converter and allow
visual monitoring of the system at any time.
Full input to output, input to case, output to case and output
to output isolation is provided. The modules are designed
and built according to the international safety standard
IEC/EN 60950 and have been approved by the safety
39
1.54"
8 TE
168
6.6"
agencies LGA (Germany) and UL (USA). The UL Mark for
Cana-da has been officially recognized be regulatory au-
thorities in provinces across Canada.
The case design allows operation at nominal load up to
71°C in a free air ambient temperature. If forced cooling is
provided, the ambient temperature may exceed 71°C but
the case temperature should remain below 95°C under all
conditions.
A temperature sensor generates an inhibit signal which
disables the outputs if the case temperature
T
C
exceeds the
limit. The outputs are automatically re-enabled when the
temperature drops below the limit.
Various options are available to adapt the converters to in-
dividual applications.
The modules may either be plugged into 19 inch rack sys-
tems according to DIN 41494, or be chassis mounted.
Table of Contents
Page
Page
Electromagnetic Compatibility (EMC) ............................ 13
Immunity to Environmental Conditions ........................... 15
Mechanical Data ............................................................ 16
Safety and Installation Instructions ................................ 17
Description of Options .................................................... 19
Accessories .................................................................... 25
Summary .......................................................................... 1
Type Survey and Key Data .............................................. 2
Type Key .......................................................................... 3
Functional Description ...................................................... 4
Electrical Input Data ......................................................... 5
Electrical Output Data ...................................................... 7
Auxiliary Functions ......................................................... 10
Edition 01/01.2001
1/25
Programming example of using MSP430 microcontroller flash to store data
The FLASH memory module of the MSP430 FLASH microcontroller is divided into several segments according to different capacities, among which the information memory SegmengA and SegmentB each have 128 b...
fish001 Microcontroller MCU
Newbie begging for development board
I am a novice in MSP430. After reading the book about MSP430, I want to practice it. But I don't have a development board. If any seniors don't use the development board, can you lend it to me? I will...
niuzhilv Microcontroller MCU
msp430 PWM output problem
For example, if the duty cycle is 20%, the PWM output pin cannot use the timer, so I use the interrupt timing to achieve the output, and the timing time sets the pin high or low. Now I want to ask: ho...
danglingbo Embedded System
Problems with generating -7V
There were two posts on the forum. The first one was a strange circuit that used 24V to divide into 16V and 8V, and then generated 10.4, 9.3, 3.3 from 16V, and -7V from 8V. The 9.3V generated by that ...
chenbingjy Power technology
Why can't the program written using C8051F060 output a square wave?
Why can't I output a square wave using this program? I can't detect a square wave output at the P0.0 pin using an oscilloscope, nor can I detect a square wave output at other P0 ports, only a DC volta...
oujboujb MCU
51 program rewrites AVR16 program--Nokia5110 display program has no display after modification
Compilation environment: AVR studioAfter the program is basically modified, there is no error or warning in AVR studio, but when it is downloaded to the microcontroller, there is no display on the scr...
37°男人 MCU

EEWorld
subscription
account

EEWorld
service
account

Automotive
development
circle

Robot
development
community

Index Files: 1671  2111  2665  1525  2882  34  43  54  31  59 
Datasheet   0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z
Room 1530, 15th Floor, Building B, No. 18 Zhongguancun Street, Haidian District, Beijing Telephone: (010) 82350740 Postal Code: 100190
Copyright © 2005-2026 EEWORLD.com.cn, Inc. All rights reserved 京ICP证060456号 京ICP备10001474号-1 电信业务审批[2006]字第258号函 京公网安备 11010802033920号