2 A0 and A1 are the two least significant bits (LSB) of the address field and set the internal burst
counter if burst is desired.
4/15/02; v.1.5
Alliance Semiconductor
3 of 14
AS7C33512PFD16A
AS7C33512PFD18A
®
Functional description
The AS7C33512PFD16A and AS7C33512PFD18A are high performance CMOS 8-Mbit synchronous Static Random Access Memory (SRAM)
devices organized as 524,288 words × 16 or 18 bits and incorporate a pipeline for highest frequency on any given technology.
Timing for this device is compatible with existing Pentium
®
synchronous cache specifications. This architecture is suited for ASIC, DSP
(TMS320C6X), and PowerPC
™1
-based systems in computing, datacom, instrumentation, and telecommunications systems.
Fast cycle times of 6/6.6/7.5/10 ns with clock access times (t
CD
) of 3.5/3.8/4.0/5.0 ns enable 166, 150, 133 and 100 MHz bus frequencies.
Three chip enable inputs permit easy memory expansion. Burst operation is initiated in one of two ways: the controller address strobe (ADSC),
or the processor address strobe (ADSP). The burst advance pin (ADV) allows subsequent internally generated burst addresses.
Read cycles are initiated with ADSP (regardless of WE and ADSC) using the new external address clocked into the on-chip address register.
When ADSP is sampled LOW, the chip enables are sampled active, and the output buffer is enabled with OE. In a read operation the data
accessed by the current address, registered in the address registers by the positive edge of CLK, are carried to the data-out registers and driven
on the output pins on the next positive edge of CLK. ADV is ignored on the clock edge that samples ADSP asserted but is sampled on all
subsequent clock edges. Address is incremented internally for the next access of the burst when ADV is sampled LOW and both address strobes
are HIGH. Burst mode is selectable with the LBO input. With LBO unconnected or driven HIGH, burst operations use a Pentium
®
count
sequence. With LBO driven LOW the device uses a linear count sequence suitable for PowerPC
™
and many other applications.
Write cycles are performed by disabling the output buffers with OE and asserting a write command. A global write enable GWE writes all 16/
18 bits regardless of the state of individual BW[a:b] inputs. Alternately, when GWE is HIGH, one or more bytes may be written by asserting
BWE and the appropriate individual byte BWn signal(s).
BWn is ignored on the clock edge that samples ADSP LOW, but is sampled on all subsequent clock edges. Output buffers are disabled when
BWn is sampled LOW (regardless of OE). Data is clocked into the data input register when BWn is sampled LOW. Address is incremented
internally to the next burst address if BWn and ADV are sampled LOW.
Read or write cycles may also be initiated with ADSC instead of ADSP. The differences between cycles initiated with ADSC and ADSP follow.
• ADSP must be sampled HIGH when ADSC is sampled LOW to initiate a cycle with ADSC.
• WE signals are sampled on the clock edge that samples ADSC LOW (and ADSP HIGH).
• Master chip select CE0 blocks ADSP, but not ADSC.
The AS7C33512PFD16A and AS7C33512PFD18A operate from a 3.3V supply. I/Os use a separate power supply that can operate at 2.5V or
3.3V. These devices are available in a 100-pin 14×20 mm TQFP packaging 119-ball 14×20 mm BGA.
Capacitance
Parameter
Input capacitance
I/O capacitance
Symbol
C
IN
C
I/O
Signals
Address and control pins
I/O pins
Test conditions
V
IN
= 0V
V
IN
= V
OUT
= 0V
Max
5
7
Unit
pF
pF
Write enable truth table (per byte)
GWE
L
H
H
H
BWE
X
L
H
L
BWn
X
L
X
H
WEn
T
T
F*
F*
Key: X = Don’t Care, L = Low, H = High, T=True, F=False; * valid read; n = a,b,
WE, WEn
= internal write signal
Burst Order
Interleaved Burst Order
Starting Address
First increment
Second increment
Third increment
00
01
10
11
LBO=1
01
10
00
11
11
00
10
01
11
10
01
00
Starting Address
First increment
Second increment
Third increment
Linear Burst Order
00
01
10
11
LBO=0
01
10
10
11
11
00
00
01
11
00
01
10
1. PowerPC
™
is a trademark International Business Machines Corporation
4/15/02; v.1.5
Alliance Semiconductor
4 of 14
AS7C33512PFD16A
AS7C33512PFD18A
®
Signal descriptions
Signal
CLK
A0–A18
DQ[a,b]
CE0
CE1, CE2
ADSP
ADSC
ADV
GWE
BWE
BW[a,b]
OE
LBO
FT
I/O
I
I
I/O
I
I
I
I
I
I
I
I
I
I
I
I
Properties
CLOCK
SYNC
SYNC
SYNC
SYNC
SYNC
SYNC
SYNC
SYNC
SYNC
SYNC
ASYNC
STATIC
STATIC
ASYNC
Description
Clock. All inputs except OE,
FT
, ZZ,
LBO
are synchronous to this clock.
Address. Sampled when all chip enables are active and ADSC or ADSP are asserted.
Data. Driven as output when the chip is enabled and OE is active.
Master chip enable. Sampled on clock edges when ADSP or ADSC is active. When CE0 is
inactive, ADSP is blocked. Refer to the Synchronous Truth Table for more information.
Synchronous chip enables. Active HIGH and active LOW, respectively. Sampled on clock edges
when ADSC is active or when CE0 and ADSP are active.
Address strobe (processor). Asserted LOW to load a new address or to enter standby mode.
Address strobe (controller). Asserted LOW to load a new address or to enter standby mode.
Burst advance. Asserted LOW to continue burst read/write.
Global write enable. Asserted LOW to write all 16/18 bits. When HIGH, BWE and BW[a,b]
control write enable.
Byte write enable. Asserted LOW with GWE = HIGH to enable effect of BW[a,b] inputs.
Write enables. Used to control write of individual bytes when GWE = HIGH and BWE = LOW.
If any of BW[a,b] is active with GWE = HIGH and BWE = LOW the cycle is a write cycle. If all
BW[a,b] are inactive, the cycle is a read cycle.
Asynchronous output enable. I/O pins are driven when OE is active and the chip is in read
mode.
Count mode. When driven HIGH, count sequence follows Intel XOR convention. When
driven LOW, count sequence follows linear convention. This signal is internally pulled HIGH.
Flow-through mode.When LOW, enables single register flow-through mode. Connect to V
DD
if unused or for pipelined operation.
Snooze. Places device in low power mode; data is retained. Connect to GND if unused.
ZZ
Absolute maximum ratings
Parameter
Power supply voltage relative to GND
Input voltage relative to GND (input pins)
Input voltage relative to GND (I/O pins)
Power dissipation
DC output current
Storage temperature (plastic)
Temperature under bias
Symbol
V
DD
, V
DDQ
V
IN
V
IN
P
D
I
OUT
T
stg
T
bias
Min
–0.5
–0.5
–0.5
–
–
–65
–65
Max
+4.6
V
DD
+ 0.5
V
DDQ
+ 0.5
1.8
50
+150
+135
Unit
V
V
V
W
mA
°
C
°
C
Note: Stresses greater than those listed under
Absolute Maximum Ratings
may cause permanent damage to the device. This is a stress rating only and functional opera-
tion of the device at these or any other conditions outside those indicated in the operational sections of this specification is not implied. Exposure to absolute
京公网安备 11010802033920号
EEWORLD
