The NRF24L01 module is a 2.4GHz communication module. The output power channel selection and protocol settings can be set through the SPI interface. It can be connected to almost all microcontroller c...
I just started to enter this industry! This is a picture of a bridge arm of a MOS tube. I mainly want to know the function of each part and how to choose the parameter size! Thank you!...
I am a beginner. I have recently encountered some strange problems while doing RFID experiments. I used a 345uH coil in parallel with a 0402 4.7nF capacitor. The oscillation voltage measured by the os...
1. Basic Concepts of Clusters There is a common method that can greatly improve the security of servers, which is clusters. Cluster technology can be defined as follows: a group of independent servers...
6410's SDBOOT is a very convenient tool. It uses the SD card to load SD_EBOOT, then downloads the standard STEPLDR and EBOOT generated by WINCE6.0, and then enters the NANDFLASH boot mode to download ...
STM8S103F2 is used to sample current. The current sampling resistor is 50 milliohms, and is input to the chip's AD port after simple filtering by 1K and 104. The voltage on the sampling resistor is ab...
Assume that data is read from 8-bit AD (if it is a higher-bit AD, the data type can be defined as int), the subroutine is get_ad();
1. Limited secondary filtering
/* A value can be adjust...[Details]
A single-chip microcomputer is also called a single-chip microcontroller. It is not a chip that completes a certain logical function, but a computer system integrated into one chip. In general, a c...[Details]
Floating-point digital signal processing has become a constant requirement for precision technology, often in applications requiring high accuracy in areas such as aviation, industrial machinery, a...[Details]
The Mobile Industry Processor Interface (MIPI) Alliance is an organization responsible for promoting the standardization of software and hardware in mobile devices. It has released the D-PHY specif...[Details]
Abstract: In order to generate a stable excitation signal, the design of a digital frequency synthesizer is implemented on FPGA using Verilog hardware language. The design includes accumulator, wav...[Details]
As LEDs continue to improve in almost every aspect of performance and cost, LED lighting is being used in an increasingly wide range of applications, among which LED street lights are a focus of in...[Details]
1 Introduction
Solar street lights are mainly composed of four parts: solar photovoltaic cell components, batteries, charge and discharge controllers, and lighting fixtures. The bo...[Details]
This paper designs a dot matrix LED text display screen that is easy to update, expandable, and low-cost. The way to reduce costs is
① Use the Bluetooth data transmission function of mobile ph...[Details]
Introduction
Power subsystems are becoming more and more integrated into the overall system. Power systems have moved from being separate "essential dangerous devices" to being monitorable...[Details]
1 Introduction
Ultrasonic waves have strong directivity, slow energy consumption, and can propagate over long distances in a medium, so they are used for distance measurement. Ultrasonic detec...[Details]
1. Background:
The instrument system parameter detection and control of the chemical production workshop of Tangshan Coal Gas Coking Plant are all analog instruments, some of which are eve...[Details]
I. Introduction
Since RS232 has a short communication distance (only 15 meters according to EAT/TAI-232 standard), and can only perform point-to-point communication, it cannot directly f...[Details]
PV inverter manufacturer SMA has launched its first DC arc fault circuit interrupter (AFCI) PV inverter and has received UL certification.
The new SunnyBoy AFCI inverter models include 3000-US...[Details]
Digital array radar (DAR) uses digital beam forming (DBF) in both receiving and transmitting modes to achieve flexible distribution and reception of RF signal power in the airspace, obtain excellent t...[Details]