MVIH Series VCXO
Hermetically Sealed Ceramic SMD Package
+2.5VDC, +3.3VDC, or +5.0VDC Supply
Voltage
Tape and Reel Available
RoHS Compliant
Supply Voltage (Vdd)
Frequency Range
Frequency Stability at +25°C
Frequency Stability (Inclusive of Temp.,
Load, Voltage and Aging)
Operating Temp.Range
Storage Temp. Range
Supply Current
Load
Output
Logic “0”
Logic “1”
Symmetry (50% of waveform)
Rise / Fall Time (10% to 90%)
Start Time
Control Voltage
Linearity
Pullability
Tristate
+2.5VDC ±10%
+3.3DC ±10%
+5.0VDC ±10%
1.544MHZ TO
50.000MHZ
1.544MHZ TO 180.000MHZ
±10 ppm
(See Part Number Guide for Options)
(See Part Number Guide for Options)
-40°C to +85°C
60mA max
60mA max
85mA max
15pF
30pF
30pF
HCMOS
10% Vdd max
90% Vdd min
40%/60%
10nSec max
10mSec max
1.25 VDC ±1.00 VDC
1.65 VDC ±1.50 VDC
2.50 VDC ±2.00 VDC
(See Part Number Guide for Options)
(See Part Number Guide for Options)
Logic “0” or Ground Osc Disabled High Impedance on Pin 4
Logic “1” (or no connect) Output Enabled
Environmental & Mechanical Detail
Shock
Solderability
Vibration
Reflow Solderability
Gross Leak Test
Fine Leak Test
MIL-STD-883, Meth 2002, Cond B
MIL-STD-883, Meth 2003
MIL-STD-883, Meth 2007, Cond A
260°C for 10 seconds
MIL-STD-883, Meth 1014, Cond C
MIL-STD-883, Meth 1014, Cond A
Marking Detail
Line 1 = MXXXXX
M
XXXXX
Line 2 = SYYWWL
S
YYWW
L
Line 3 = XXXXX
Internal use only
May vary with lots
Black dot to denote Pin 1
=
=
=
Internal Code
4 Numerical Digit Date Code
(Year / Week) Jan 27 2011=1105
=
=
MMD
Frequency in MHZ
Denotes RoHS Compliant
MMD MONITOR/QUARTZEK – An ILSI Company,
5458 Louie Lane, Reno, NV 89511
Phone: (775) 851-8880,
www.mmdcomp.com
Revision:
Revisions only with customer approval
07/31/13 P
Pg 1 of 2
Part Number Guide
MVI
5 x 7 Ceramic SM VCXO 6 Pads
H
Frequency
Supply Voltage
Output
H = HCMOS
2 = +2.5 VDC
3 = +3.3 VDC
5 = +5.0 VDC
Frequency
Stability
010 = ±10 ppm
025 = ±25 ppm
050 = ±50 ppm
100 = ±100 ppm
Operating
Temperature
Blank = 0°C to +70°C
27 = -20°C to +70°C
48 = -40°C to +85°C
Linearity
Pullability
D = ±50 ppm min
P = ±80 ppm min
C = ±100 ppm min
Blank = ±20% max
X = ±5% max
Y = ±10% max
Z = ±15% max
Pin 2 & 5 Connection
Blank = Pins 2 & 5 = N/C
H = Pin 2-Tri-state, Pin 5-N/C
R = Pin 2-N/C, Pin 5-Tri-state
T = Pins 2 & 5 = Tri-state
Packaging
Blank = Bulk
T = Tape and Reel
Please Consult with MMD Sales Deparment for any other Parameters or Options
Mechanical Details
Tape & Reel Dimensions
4.00
2.00
PITCH
1.75
7.50
Tape Width
B0
REEL DIA
A0
K0
Q1 Q2
Q3 Q4
Q1 Q2
Q3 Q4
AO
BO
K0
PITCH
TAPE WIDTH
REEL DIA
QTY PER REEL
PIN 1 ORIENT.
1.85 [.073]
2.25 [.089]
0.95 [.037]
4.00 [.157]
12.00 [.471]
180 [7.0]
500
Q1
NOTES: UNLESS OTHERWISE SPECIFIED
1. Applicable Standards / Specifications
ANSI Y14.5M, Dimensions and Tolerances
EIA-481-B, 8 mm through 200mm Embossed Carrier Taping and 8 mm and 12 mm
Punched Carrier Taping of Surface Mount Components for Automatic Handling.
2. Dimensions are in millimeters [inch].
3. Tolerances are ±0.1 [.004] mm unless otherwise specified.
4. Do not scale drawing.
DIRECTION OF FEED
MMD MONITOR/QUARTZEK – An ILSI Company,
5458 Louie Lane, Reno, NV 89511
Phone: (775) 851-8880,
www.mmdcomp.com
Revision:
Revisions only with customer approval
07/31/13 P
Pg 2 of 2
京公网安备 11010802033920号
EEWORLD
