DATA SHEET
MOS Integrated Circuit
µ
PD75P036
4-BIT SINGLE-CHIP MICROCONTROLLER
DESCRIPTION
The
µ
PD75P036 is a 4-bit signgle-chip microcontroller that replaced the
µ
PD75028's on-chip ROM with
one-time PROM or EPROM. Because this device can operate at the same supply voltage as its mask
version, it is suited for preproduction in development stage or small-scale production.
The one-time PROM version is programmable only once and is useful for small-scale production of many
different products and time-to-market of a new product. The EPROM version is programmable, erasable,
and reprogrammable, and is suited for the evaluation of application systems.
Detailed functions are described in the followig user's manual. Be sure to read it for designing.
5
µ
PD75028 User's Manual: IEU-1280
FEATURES
•
•
µ
PD75028 compatible
• At full production, the
µ
PD75P036 can be replaced with the
µ
PD75028 which incorporates mask ROM
Memory capacity
• Program memory (PROM): 16256 x 8 bits
• Data memory (RAM): 1024 x 4 bits
•
•
•
•
Internal pull-up resistors can be specified by software: Ports 0-3, 6-8
Internal pull-down resistors can be specified by software: Port 9
Open-drain input/output: Ports 4, 5, 10
Can operate at low voltage: V
DD
= 2.7 to 6.0 V
ORDERING INFORMATION
Part Number
Package
64-pin plastic shrink DIP (750 mils)
64-pin plastic QFP (14 x 14 mm)
64-pin ceramic WQFN
Internal ROM
One-time PROM
One-time PROM
EPROM
Quality Grade
Standard
Standard
Not applicable
5
µ
PD75P036CW
µ
PD75P036GC-AB8
µ
PD75P036KG
Caution
Internal pull-up/pull-down resistors cannot be specified by mask option as for this device.
Please refer to "Quality grade on NEC Semiconductor Devices" (Document number IEI-1209) published by NEC Corporation
to know the specification of quality grade on e devices and its recommended applications.
The reliability of the EPROM version,
µ
PD75P036KG, is not guaranteed when used in mass-produced application
sets. Please use this device only experimentally or for evaluation during trial manufacture.
The function common to the one-time PROM and EPROM versions is referred to as PROM throughout this document.
The information in this document is subject to change without notice.
Document No. U10051EJ3V0DS00 (3rd edition)
(Previous No. IC-2967
Date Published September 1995 P
Printed in Japan
The mark
5
shows revised points.
©
NEC Corporation 1991
µ
PD75P036
PIN IDENTIFICATION
P00-P03
P10-P13
P20-P23
P30-P33
P40-P43
P50-P53
P60-P63
P70-P73
P80-P83
P90-P93
: Port 0
: Port 1
: Port 2
: Port 3
: Port 4
: Port 5
: Port 6
: Port 7
: Port 8
: Port 9
PPO
AN0-AN7
AV
REF+
AB
REF–
AV
DD
AV
SS
V
DD
V
SS
MD0-MD3
V
PP
MAI
MAZ
MAT
INT0, INT1, INT4 : External Vectored Interrupt
INT2
X1, X2
XT1, XT2
MAR
: External Test Input
: Main System Clock Oscillation
: Subsystem Clock Oscillation
: Reference Integration
Control
: Integration Control
: Autozero Control
: External Comparate
Timing Input
: Programmable Pulse Output
··· MFT timer mode
: Analog Input
: Analog Reference (+)
: Analog Reference (–)
: Analog V
DD
: Analog V
SS
: Positive Power Supply
: Ground
: Mode Selection
: Programming/Verifying Power Supply
MFT A/D mode
5
P100-P103 : Port 10
P110-P113 : Port 11
KR0-KR7
SCK
SI
SO
SB0, SB1
RESET
TI0
PTO0
BUZ
PCL
Remark
: Key Return
: Serial Clock
: Serial Input
: Serial Output
: Serial Bus
: Reset Input
: Timer Input
: Programmable Timer Output
: Buzzer Clock
: Programmable Clock
MFT: Multifunction Timer
3
µ
PD75P036
CONTENTS
1.
PIN FUNCTIONS ... 6
1.1 Port Pins ... 6
1.2 Non-Port Pins ... 8
1.3 Pin Input/Output Circuits ... 10
1.4 Recommended Connection of Unused Pins ... 13
MEMORY ... 14
2.1 Differences between
µ
PD75P036 and
µ
PD75028/75036 ... 14
2.2 Program Memory (ROM) ... 15
2.3 Data Memory (RAM) ... 17
WRITING AND VERIFYING PROM (PROGRAM MEMORY) ... 19
3.1 Operation Modes For Writing/Verifying Program Memory ... 19
3.2 Program Memory Write Procedure ... 20
3.3 Program Memory Read Procedure ... 21
3.4 Erasure (
µ
PD75P036KG only) ... 22
ELECTRICAL SPECIFICATIONS ... 23
CHARACTERISTIC CURVES ... 38
PACKAGE DRAWINGS ... 44
RECOMMENDED SOLDERING CONDITIONS ... 47
DEVELOPMENT TOOLS ... 48
RELATED DOCUMENTS ... 49
5
2.
3.
5
4.
5.
6.
7.
5
APPENDIX A.
APPENDIX B.
5
5