S29GL064A11TAIR70 datasheet, PDF

Datasheet> All Categories > storage> storage> S29GL064A11TAIR70

S29GL064A11TAIR70: DescriptionFlash, 4MX16, 110ns, PDSO48, MO-142EC, TSOP-48; Categorystorage storage; File Size4MB，95 Pages; ManufacturerSPANSION; Websitehttp://www.spansion.com/

Download Datasheet Parametric View All

S29GL064A11TAIR70 Overview

Flash, 4MX16, 110ns, PDSO48, MO-142EC, TSOP-48

S29GL064A11TAIR70 Parametric

Parameter Name	Attribute value
Is it lead-free?	Contains lead
Is it Rohs certified?	incompatible
Maker	SPANSION
Parts packaging code	TSOP1
package instruction	MO-142EC, TSOP-48
Contacts	48
Reach Compliance Code	not_compliant
ECCN code	3A991.B.1.A
Maximum access time	110 ns
command user interface	YES
Universal Flash Interface	YES
Data polling	YES
JESD-30 code	R-PDSO-G48
JESD-609 code	e0
length	18.4 mm
memory density	67108864 bit
Memory IC Type	FLASH
memory width	16
Humidity sensitivity level	3
Number of functions	1
Number of departments/size	128
Number of terminals	48
word count	4194304 words
character code	4000000
Operating mode	ASYNCHRONOUS
Maximum operating temperature	85 °C
Minimum operating temperature	-40 °C
organize	4MX16
Package body material	PLASTIC/EPOXY
encapsulated code	TSSOP
Encapsulate equivalent code	TSSOP48,.8,20
Package shape	RECTANGULAR
Package form	SMALL OUTLINE, THIN PROFILE, SHRINK PITCH
page size	4 words
Parallel/Serial	PARALLEL
Peak Reflow Temperature (Celsius)	240
power supply	3.3 V
Programming voltage	3 V
Certification status	Not Qualified
ready/busy	YES
Maximum seat height	1.2 mm
Department size	32K
Maximum standby current	0.000005 A
Maximum slew rate	0.06 mA
Maximum supply voltage (Vsup)	3.6 V
Minimum supply voltage (Vsup)	3 V
Nominal supply voltage (Vsup)	3.3 V
surface mount	YES
technology	CMOS
Temperature level	INDUSTRIAL
Terminal surface	Tin/Lead (Sn/Pb)
Terminal form	GULL WING
Terminal pitch	0.5 mm
Terminal location	DUAL
Maximum time at peak reflow temperature	30
switch bit	YES
type	NOR TYPE
width	12 mm

Preview

Download Datasheet

View All

S29GL-A MirrorBit

Flash Family

S29GL064A, S29GL032A, and S29GL016A

64 Megabit, 32 Megabit, and 16 Megabit

3.0-Volt only Page Mode Flash Memory

Featuring 200 nm MirrorBit Process Technology

S29GL-A Cover Sheet

Data Sheet

This product family has been retired and is not recommended for designs. For new and current designs,

the S29AL016J, S29GL032N, and S29GL064N supersede S29GL016A ,S29GL032A, and S29GL064A

respectively. These are the factory-recommended migration paths. Please refer to the S29AL016J,

S29GL032N, and S29GL064N data sheets for specifications and ordering information. Availability of this

document is retained for reference and historical purposes only.

Notice to Readers:

This document states the current technical specifications regarding the Spansion

product(s) described herein. Spansion Inc. deems the products to have been in sufficient production volume

such that subsequent versions of this document are not expected to change. However, typographical or

specification corrections, or modifications to the valid combinations offered may occur.

Publication Number

S29GL-A_00

Revision

Amendment

Issue Date

May 21, 2008

D at a

S hee t

Notice On Data Sheet Designations

Spansion Inc. issues data sheets with Advance Information or Preliminary designations to advise readers of

product information or intended specifications throughout the product life cycle, including development,

qualification, initial production, and full production. In all cases, however, readers are encouraged to verify

that they have the latest information before finalizing their design. The following descriptions of Spansion data

sheet designations are presented here to highlight their presence and definitions.

Advance Information

The Advance Information designation indicates that Spansion Inc. is developing one or more specific

products, but has not committed any design to production. Information presented in a document with this

designation is likely to change, and in some cases, development on the product may discontinue. Spansion

Inc. therefore places the following conditions upon Advance Information content:

“This document contains information on one or more products under development at Spansion Inc.

The information is intended to help you evaluate this product. Do not design in this product without

contacting the factory. Spansion Inc. reserves the right to change or discontinue work on this proposed

product without notice.”

Preliminary

The Preliminary designation indicates that the product development has progressed such that a commitment

to production has taken place. This designation covers several aspects of the product life cycle, including

product qualification, initial production, and the subsequent phases in the manufacturing process that occur

before full production is achieved. Changes to the technical specifications presented in a Preliminary

document should be expected while keeping these aspects of production under consideration. Spansion

places the following conditions upon Preliminary content:

“This document states the current technical specifications regarding the Spansion product(s)

described herein. The Preliminary status of this document indicates that product qualification has been

completed, and that initial production has begun. Due to the phases of the manufacturing process that

require maintaining efficiency and quality, this document may be revised by subsequent versions or

modifications due to changes in technical specifications.”

Combination

Some data sheets contain a combination of products with different designations (Advance Information,

Preliminary, or Full Production). This type of document distinguishes these products and their designations

wherever necessary, typically on the first page, the ordering information page, and pages with the DC

Characteristics table and the AC Erase and Program table (in the table notes). The disclaimer on the first

page refers the reader to the notice on this page.

Full Production (No Designation on Document)

When a product has been in production for a period of time such that no changes or only nominal changes

are expected, the Preliminary designation is removed from the data sheet. Nominal changes may include

those affecting the number of ordering part numbers available, such as the addition or deletion of a speed

option, temperature range, package type, or V

range. Changes may also include those needed to clarify a

description or to correct a typographical error or incorrect specification. Spansion Inc. applies the following

conditions to documents in this category:

“This document states the current technical specifications regarding the Spansion product(s)

described herein. Spansion Inc. deems the products to have been in sufficient production volume such

that subsequent versions of this document are not expected to change. However, typographical or

specification corrections, or modifications to the valid combinations offered may occur.”

Questions regarding these document designations may be directed to your local sales office.

S29GL-A

S29GL-A_00_A12 May 21, 2008

D at a

S hee t

General Description

The S29GL-A family of devices are 3.0-Volt single-power Flash memory manufactured using 200 nm

MirrorBit technology. The S29GL064A is a 64-Mb device organized as 4,194,304 words or 8,388,608 bytes.

The S29GL032A is a 32-Mb device organized as 2,097,152 words or 4,194,304 bytes. The S29Gl016A is a

16-Mb device organized as 1,048,576 words or 2,097,152 bytes. Depending on the model number, the

devices have an 8-bit wide data bus only, 16-bit wide data bus only, or a 16-bit wide data bus that can also

function as an 8-bit wide data bus by using the BYTE# input. The devices can be programmed either in the

host system or in standard EPROM programmers.

Access times as fast as 90 ns are available. Note that each access time has a specific operating voltage

range (V

) as specified in the

Product Selector Guide

on page 9

and the

Ordering Information

on page 19.

Package offerings include 48-pin TSOP, 56-pin TSOP, 48-ball fine-pitch BGA and 64-ball Fortified BGA,

depending on model number. Each device has separate chip enable (CE#), write enable (WE#) and output

enable (OE#) controls.

Each device requires only a

single 3.0-Volt power supply

for both read and write functions. In addition to a

input, a high-voltage

accelerated program (ACC)

feature provides shorter programming times through

increased current on the WP#/ACC input. This feature is intended to facilitate factory throughput during

system production, but may also be used in the field if desired.

The device is entirely command set compatible with the

JEDEC single-power-supply Flash standard.

Commands are written to the device using standard microprocessor write timing. Write cycles also internally

latch addresses and data needed for the programming and erase operations.

The

sector erase architecture

allows memory sectors to be erased and reprogrammed without affecting the

data contents of other sectors. The device is fully erased when shipped from the factory.

Device programming and erasure are initiated through command sequences. Once a program or erase

operation begins, the host system need only poll the DQ7 (Data# Polling) or DQ6 (toggle)

status bits

monitor the

Ready/Busy# (RY/BY#)

output to determine whether the operation is complete. To facilitate

programming, an

Unlock Bypass

mode reduces command sequence overhead by requiring only two write

cycles to program data instead of four.

Hardware data protection

measures include a low V

detector that automatically inhibits write operations

during power transitions. The hardware sector protection feature disables both program and erase operations

in any combination of sectors of memory. This can be achieved in-system or via programming equipment.

The

Erase Suspend/Erase Resume

feature allows the host system to pause an erase operation in a given

sector to read or program any other sector and then complete the erase operation. The

Program Suspend/

Program Resume

feature enables the host system to pause a program operation in a given sector to read

any other sector and then complete the program operation.

The

hardware RESET# pin

terminates any operation in progress and resets the device, after which it is then

ready for a new operation. The RESET# pin may be tied to the system reset circuitry. A system reset would

thus also reset the device, enabling the host system to read boot-up firmware from the Flash memory device.

The device reduces power consumption in the

standby mode

when it detects specific voltage levels on CE#

and RESET#, or when addresses are stable for a specified period of time.

The

Write Protect (WP#)

feature protects the first or last sector by asserting a logic low on the WP#/ACC pin

or WP# pin, depending on model number. The protected sector is still protected even during accelerated

programming.

The

Secured Silicon Sector

provides a 128-word/256-byte area for code or data that can be permanently

protected. Once this sector is protected, no further changes within the sector can occur.

Spansion MirrorBit flash technology combines years of Flash memory manufacturing experience to produce

the highest levels of quality, reliability and cost effectiveness. The device electrically erases all bits within a

sector simultaneously via hot-hole assisted erase. The data is programmed using hot electron injection.

S29GL-A

S29GL-A_00_A12 May 21, 2008

Data

She et

Table of Contents

Distinctive Characteristics

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3

General Description

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4

Product Selector Guide

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9

Block Diagram

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9

Connection Diagrams

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10

3.1

Special Package Handling Instructions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10

Pin Descriptions

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15

Logic Symbols

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

5.1

Logic Symbol–S29GL064A (Models R1, R2, R8, R9) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

5.2

Logic Symbol–S29GL064A (Models R3, R4). . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

5.3

Logic Symbol–S29GL064A (Model R5) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

5.4

Logic Symbol–S29GL064A (Models R6, R7). . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

5.5

Logic Symbol–S29GL032A (Models R1, R2). . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

5.6

Logic Symbol–S29GL032A (Models R3, R4). . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

5.7

Logic Symbol–S29GL032A (Models W3, W4) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

5.8

Logic Symbol–S29GL016A (Models R1, R2). . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

5.9

Logic Symbol–S29GL016A (Models W1, W2) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

Ordering Information

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

6.1

S29GL016A Standard Products. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

6.2

S29GL032A Standard Products. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

6.3

S29GL064A Standard Products. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

Device Bus Operations

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

7.1

Word/Byte Configuration . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

7.2

Requirements for Reading Array Data. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

7.3

Writing Commands/Command Sequences . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

7.4

Standby Mode . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

7.5

Automatic Sleep Mode. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

7.6

RESET#: Hardware Reset Pin. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

7.7

Output Disable Mode . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

7.8

Autoselect Mode . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

7.9

Sector Group Protection and Unprotection . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

7.10 Temporary Sector Group Unprotect. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

7.11 Secured Silicon Sector Flash Memory Region . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

7.12 Write Protect (WP#) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

7.13 Hardware Data Protection . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

Common Flash Memory Interface (CFI)

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 49

Command Definitions

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

9.1

Reading Array Data . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

9.2

Reset Command . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

9.3

Autoselect Command Sequence . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

9.4

Enter/Exit Secured Silicon Sector Command Sequence . . . . . . . . . . . . . . . . . . . . . . . . . . . .

9.5

Program Suspend/Program Resume Command Sequence . . . . . . . . . . . . . . . . . . . . . . . . .

9.6

Chip Erase Command Sequence . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

Sector Erase Command Sequence

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

10.1 Erase Suspend/Erase Resume Commands . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

10.2 Command Definitions. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

10.3 Write Operation Status. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

10.4 DQ7: Data# Polling . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

10.5 RY/BY#: Ready/Busy#. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

10.6 DQ6: Toggle Bit I . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

10.7 DQ2: Toggle Bit II . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

10.8 Reading Toggle Bits DQ6/DQ2 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

10.9 DQ5: Exceeded Timing Limits . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

10.

May 21, 2008 S29GL-A_00_A12

S29GL-A

Recommended Resources

Logarithmic characteristic light sensor circuit diagram

YYG-2 cold atomic fluorescence mercury meter circuit

BL0509 type application connection circuit

Car fuel tank liquid level display alarm

555 single power supply converted into positive and negative voltage regulator circuit

555 pocket frequency shift locomotive signal sending box circuit

Can anyone give me a "plug and play system architecture"? Thank you very much: Can anyone give me a "plug and play system architecture"? Thank you very much. My email address is: jerk66@163.com...; f56007 Embedded System

Comparative analysis of Samsung's three mainstream processors: s3c2440, s3c6410, and s5pv210: [b]Comparative Analysis of Samsung's Three Mainstream Processors s3c2440\s3c6410\s5pv210[/font][font=宋体][/font][/b][b]Comparison of 1, ARM[/font][font=宋体]architecture[/font][/b][align=left] S3C2440[fo...; sinlinx ARM Technology

The problem of grounding the output signal of the half-bridge inverter circuit: As shown in the figure, after the half-bridge inverter output passes through c5 and L1, it passes through two voltage-dividing resistors to form two detection signals s1 and s2. When laying out the PC...; shaorc Analog electronics

Five factors affecting the bootstrap circuit: 1. Gate Charge required to enhance MGT 2. Iqbs - quiescent current for the high side driver circuitry 3. Currents within the level shifter of the control IC 4. MGT gate-source forward leakage current ...; 安_然 Analog electronics

mux710,ppp dial: Hello everyone: I want to use mux710 to make a serial port multi-channel driver under 6.0, and use com3 (the physical serial port on the original board) to virtualize two serial ports, com7 (for at) a...; gucunlin Embedded System

Make full use of signal sources and virtual instruments in Proteus to speed up DSP program design (including logic analyzer testing): External interrupt experiment on LaunchPad [[i] This post was last edited by Pinghu Qiuyue on 2013-5-13 22:42 [/i]]...; 平湖秋月 Microcontroller MCU

Shortcut: S0 S1 S2 S3 S4 S5 S6 S7 S8 S9 SA SB SC SD SE SF SG SH SI SJ SK SL SM SN SO SP SQ SR SS ST SU SV SW SX SY SZ T0 T1 T2 T3 T4 T5 T6 T7 T8 T9 TA TB TC TD TE TF TG TH TI TJ TK TL TM TN TO TP TQ TR TS TT TU TV TW TX TY TZ U0 U1 U2 U3 U4 U6 U7 U8 UA UB UC UD UE UF UG UH UI UJ UK UL UM UN UP UQ UR US UT UU UV UW UX UZ V0 V1 V2 V3 V4 V5 V6 V7 V8 V9 VA VB VC VD VE VF VG VH VI VJ VK VL VM VN VO VP VQ VR VS VT VU VV VW VX VY VZ W0 W1 W2 W3 W4 W5 W6 W7 W8 W9 WA WB WC WD WE WF WG WH WI WJ WK WL WM WN WO WP WR WS WT WU WV WW WY X0 X1 X2 X3 X4 X5 X7 X8 X9 XA XB XC XD XE XF XG XH XK XL XM XN XO XP XQ XR XS XT XU XV XW XX XY XZ Y0 Y1 Y2 Y4 Y5 Y6 Y9 YA YB YC YD YE YF YG YH YK YL YM YN YP YQ YR YS YT YX Z0 Z1 Z2 Z3 Z4 Z5 Z6 Z8 ZA ZB ZC ZD ZE ZF ZG ZH ZJ ZL ZM ZN ZP ZR ZS ZT ZU ZV ZW ZX ZY

Popular Components