-
Today, as network technology becomes more and more popular, industrial field instruments, data acquisition and control equipment are becoming more and more networked, and the combination of industr...[Details]
-
Most
embedded
systems are powered from a 48V backplane. This voltage is typically stepped down to a lower intermediate bus voltage of 24V, 12V, or 5V to power the circuit board racks withi...[Details]
-
Abstract This paper
introduces a wireless radio frequency transmission chip nRF9E5 based on 8051 core. The remote control system of flapping-wing micro-aircraft is made by using this chip. Th...[Details]
-
1. Introduction
The balance ability
of human beings
is the basis for people to carry out various sports. People need
balance ability
to stand, sit, lie down and walk
. Once
...[Details]
-
Abstract: This paper introduces the controller, interface, display principle and driving method of the handheld computer LCD display based on the SA1110 microprocessor. Combined with the HPC projec...[Details]
-
1 Introduction
Economic development has prompted people to continuously improve their security awareness. When traditional local analog monitoring methods gradually fail to meet the needs of l...[Details]
-
Development Status
Looking at the development of security monitoring technology: from the first generation of analog monitoring, to the second generation of digital monitoring, and then up...[Details]
-
Today, the value of electronic components in cars accounts for 15-20% of the total vehicle. In the future, as more safety electronic devices, fuel consumption and fuel emission control electronic s...[Details]
-
Analysis of automotive sensor testing requirements
At present, the control system used in automobiles can be functionally divided into three parts: sensor unit, control unit and execution ...[Details]
-
0 Introduction
In the mixed analog and digital circuit system, multiple power supplies are required. In order to reduce the number of external power supplies and realize the miniaturizatio...[Details]
-
0 Introduction
Due to the large number and variety of electronic equipment in special vehicles, the limited management capabilities of traditional semi-automatic power distribution methods...[Details]
-
1 Introduction
With the increasing electrification and automation of automotive parts and the high requirements for noise, electromagnetic compatibility and efficiency of automotiv...[Details]
-
0 Introduction
A manipulator is a mechatronic automatic device that can simulate human arm movements and replace human hands to grasp, move workpieces or operate tools according to set pro...[Details]
-
The current and future carrier and bandwidth requirements of wireless air interfaces pose a challenge to 3G base station OEMs, who must choose a platform that can quickly meet the processing requir...[Details]
-
At present, the requirements for real-time and rapid digital signal processing are becoming increasingly higher, both in military and civilian fields. As programmable logic devices (PLDs) are rapid...[Details]
stm32/stm8
京公网安备 11010802033920号
EEWORLD
