EEWORLDEEWORLDEEWORLD

Part Number

Search

PH1-SI2FC260N

Description
Transponder, FC/UPC Connector,
CategoryWireless rf/communication    Optical fiber   
File Size240KB,6 Pages
ManufacturerJDS Uniphase Corporation ( VIAVI )
Websitehttp://www.jdsu.com/index.html
Download Datasheet Parametric View All

PH1-SI2FC260N Overview

Transponder, FC/UPC Connector,

PH1-SI2FC260N Parametric

Parameter NameAttribute value
MakerJDS Uniphase Corporation ( VIAVI )
Reach Compliance Codeunknown
Other featuresIT ALSO OPERATE FROM 1280NM TO 1600NM
body height13.2 mm
Body length or diameter84.1 mm
Communication standardsGR-253, OC-192, SONET
Connection TypeFC/UPC CONNECTOR
Fiber optic equipment typesTRANSCEIVER, TRANSPONDER
Nominal operating wavelength1529 nm
Nominal optical power output1.122 mW
minimum return loss-27 dB
COMMUNICATIONS MODULES & SUBSYSTEMS
10 Gb/s TDM/DWDM 300 Pin SFF MSA SR2/IR2/LR2 Transponder
PH1 Series
Key Features
• Three configurations supporting SR2/IR2/LR2 applications
• Supports dense wavelength division multiplexing
(DWDM) applications (without wavelocker)
• Microprocessor controls to support I2C
• Integrated 16:1/1:16 mux/demux
• Small form factor package (2.2" x 3.0" x 0.53") for high
density applications
• Low power consumption: 4.8 W typical, 6.8 W maximum
for TDM applications
• 70 °C maximum operating temperature
• High sensitivity PIN or APD receivers
• SONET, FEC, Ethernet and Multirate Capable Versions
• Forward, counter and line timing clocking modes
Applications
Telecommunications
Metropolitan Area Networks
Subscriber loop
Intra-office SONET/SDH
High bit-rate data communications
JDSU 10 Gb/s PH1 Series transponders are intended for 1550 nm system
applications with reaches of up to 80 km. The series includes three different
transponders for SR2 (25 km), IR2 (40 km), and LR2 (80 km) TDM or DWDM
applications. Each transponder accepts 16 bits of parallel digital data and converts
it to a 10 Gb/s NRZ modulated optical signal. It also accepts a 10 Gb/s NRZ
modulated optical signal and converts it into 16 bit wide parallel digital data.
The PH1 series offers low DC power dissipation and is available in either a small
form factor package (2.2 x 3 x 0.53 inches) or in a larger footprint (3.5 x 4.5 x 0.53
inches) package, depending on system thermal performance requirements. The
transmit design uses an Electro-Absorptive Modulated Laser (EML) which,
depending on the configuration, produces an average output power of between
-4 dBm to 2 dBm (EOL). A PIN (-17 dBm typical sensitivity) or APD (-24 dBm
typical sensitivity) receiver is available, based on system configurations.
JDSU PH1 Series transponders are designed to support the following data rates:
9.953 Gb/s (SONET), 10.3125 Gb/s (Ethernet), 10.664 Gb/s (FEC Encoded),
10.709 Gb/s FEC, or 11.09 Gb/s EFEC. They meet all applicable SONET/SDH standards.
Compliance
• Telcordia GR-253-Core
NORTH AMERICA
:
800 498-JDSU (5378)
WORLDWIDE
:
+800 5378-JDSU
WEBSITE
:
www.jdsu.com
My ucos finally runs on 51 (with code and strong experience attached)
[font=Verdana]Reposted from Zhou Ligong Forum[/font] [font=Verdana][/font] [font=Verdana]I have been learning UCOS for a while, and always wanted to find a transplantation case to try running it[/font...
gina Real-time operating system RTOS
Winter air and water proof camera------Where are you???
First of all, this is not an advertisement. Customers often mention that when winter comes, there is gas inside the camera housing. When the infrared light is turned on, the gas hits the glass and pro...
中志达摄像机 Industrial Control Electronics
4.3-inch screen cannot display complete text
I am developing and testing TFT LCD screens recently. At first, I compiled the CE system with a 3.5-inch 320*240 resolution. The text can be displayed completely. Later, I changed to a 4.3-inch 480*27...
yazi Embedded System
The influence of electronic ballast on the performance of fluorescent lamps
Abstract: The basic requirements for the matching of ballasts and fluorescent lamps are proposed, and their shortcomings are pointed out. The influence of electronic ballasts on the operation of fluor...
zbz0529 Industrial Control Electronics
【Contribution Idle】Corresponding EE Collection Order
I have three things on hand, which I don't need for the time being, but I'm here to respond to the EE solicitation order... 1 A MAXIM anemometer. It was the prize for the emergency light last time. Th...
辛昕 Buy&Sell
Is it OK if both ends of the serial communication are RS232?
I want to make a hardware system with a console port, and control it through a PC. I see that switches usually use RJ45 as the console port. I don't know much about hardware, so I'd like to ask some l...
为科学执着 Embedded System

EEWorld
subscription
account

EEWorld
service
account

Automotive
development
circle

Robot
development
community

Index Files: 86  1532  273  1605  1933  2  31  6  33  39 
Datasheet   0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z
Room 1530, 15th Floor, Building B, No. 18 Zhongguancun Street, Haidian District, Beijing Telephone: (010) 82350740 Postal Code: 100190
Copyright © 2005-2026 EEWORLD.com.cn, Inc. All rights reserved 京ICP证060456号 京ICP备10001474号-1 电信业务审批[2006]字第258号函 京公网安备 11010802033920号