(for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
!Note
•Please read rating and
!CAUTION
(for storage, operating, rating, soldering, mounting and handling) in this PDF catalog to prevent smoking and/or burning, etc.
•This catalog has only typical specifications. Therefore,thereareno space for detailed specifications. Therefore, please approve our productsheet for product specificaions approval sheet for product specifications before ordering.
This catalog has only typical specifications because you is requested to approve our product specifications or to transact the approval specifications or transact the before ordering.
N91E7.pdf 03.5.13
Chip Multilayer Delay Lines
Chip Multilayer Delay Lines
0.25+0.1/-0.15
3.2±0.2
1.1±0.2
0.5±0.1
1
This Delay Line was developed by applying ceramic
multilayering and hole technology. It consists of
copper line and low dielectric constant material and
incorporates metal shields. LDH series are very small
and made for use at high frequencies.
(3)
1.60±0.2
(4)
(2)
(1)
(8)
(5)
(6)
(7)
0.25+0.1/-0.15
0.35±0.2
0.45±0.15
(1)(3)(5)(7) : NC
(2)(6) : GND
(4)(8) : IN/OUT
s
Features
1. High stability at high frequency (2GHz)
2. Small, thin and light, utilizing multilayer
construction
3. Metal shield is built inside chip.
4. Reflow solderable
5. Supplied on tape
0.5±0.1
1.0±0.1
(in mm)
LDH31 Series
Terminal of "NC" should not be fixed to any pattern.
All the technical data and information contained herein are subject
to change without prior notice.
3.2±0.2
(3)
(2)
(1)
1.5±0.15
0.4±0.2 0.7±0.2
(4)
(8)
(5)
(6)
(7)
2.5±0.2
(1)(3)(5)(7) : NC
(2)(6) : GND
(4) : IN/OUT
(8) : IN/OUT
(in mm)
0.4±0.2
0.1min. 0.45±0.15 1.0±0.2
0.55±0.15
LDH32 Series
Terminal of "NC" should not be fixed
to any pattern.
All the technical data and information
contained herein are subject to
change without prior notice.
0.6±0.1
(1) (2)
(8)
(7) (6)
(3)
(4)
(5)
2.2±0.1
0.3±0.2
5.0±0.3
0.1±0.1
1.1–3.1
1.27±0.2
0.3max.
4.0±0.3
0.4±0.2
4.5±0.2
Directional
Input Mark
1.1±0.2
(6)
0.8±0.2
(5)
(4)
3.2±0.2
2.0±0.1
0.35±0.2
(1)(3)(4)(5)(7)(8) : GND
(2)(6)
: IN/OUT
1.27±0.2
LDH43 Series
0.35±0.10
(in mm)
All the technical data and information contained herein are
subject to change without prior notice.
1.27±0.10
LDH54 Series
0.3±0.2
(1)(3) : IN / OUT
(2) (4)
: GND
(5)(6)
(in mm)
6.3±0.3
2.5 max.
0.5 min.
1.27±0.2
0.5 min.
0.3 max.
6.3±0.3
(1) (2) (3) (4)
0.3±0.2
10.0±0.3
3.7 max.
0.4 min.
2.54±0.2
0.8 min.
0.3 max.
(1) (2) (3) (4)
(10)
(5)
0.4±0.2
0.9±0.3 3.0±0.3
(1)
(2)
(3)
5.0±0.3
2.1±0.3
0.55±0.3
0.5 min. 0.4 min.
(8) (7) (6) (5)
(9) (8) (7) (6)
1.4±0.3
0.55±0.3
(1) (5) : IN / OUT
(2)(3)(4) : GND
(6)(7)(8)
(in mm)
0.6 min. 0.4 min.
LDH65 Series
LDHA2 Series
(1) (6) : IN / OUT
(2)(3)(4) : GND
(5)(7)(8)
(9)(10)
(in mm)
Cat.No.N91E-7
1
Please read rating and
!CAUTION
(for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
!Note
•Please read rating and
!CAUTION
(for storage, operating, rating, soldering, mounting and handling) in this PDF catalog to prevent smoking and/or burning, etc.
•This catalog has only typical specifications. Therefore,thereareno space for detailed specifications. Therefore, please approve our productsheet for product specificaions approval sheet for product specifications before ordering.
This catalog has only typical specifications because you is requested to approve our product specifications or to transact the approval specifications or transact the before ordering.
N91E7.pdf 03.5.13
1
Part Number
LDH311N00LAC-810
LDH311N50LAC-810
LDH312N00LAC-810
LDH321N00LAC-800
LDH321N50LAC-800
LDH322N00LAC-800
LDH322N50LAC-800
LDH323N00LAC-800
LDH43050PAAA-830
LDH43060PAAA-830
LDH43070PAAA-830
LDH43080PAAA-830
LDH43090PAAA-830
LDH43100PAAA-830
LDH43120PKAA-830
LDH43130PKAA-830
LDH43140PKAA-830
LDH43150PKAA-830
LDH54100PAAA-600
LDH54200PAAA-600
LDH54300PAAA-600
LDH54400PAAA-600
LDH54500PAAA-600
LDH54600PBAA-600
LDH54700PBAA-600
LDH54800PBAA-600
LDH54900PBAA-600
LDH541N00BAA-600
LDH541N50BAA-600
LDH542N00BAA-600
LDH542N50BAA-600
LDH543N00KAB-700
LDH544N00KAB-700
LDH545N00KAB-700
LDH546N00KAB-700
LDH547N00KAB-700
LDH548N00KAB-700
LDH549N00KAB-700
LDH5410N0KAB-700
LDH65100PAAA-400
LDH65200PAAA-400
LDH65300PAAA-400
LDH65400PAAA-400
LDH65500PAAA-400
LDH65600PBAA-400
LDH65700PBAA-400
LDH65800PBAA-400
LDH65900PBAA-400
LDH651N00BAA-400
LDHA2500PAAA-300
LDHA21N00BAA-300
LDHA21N50BAA-300
LDHA22N00BAA-300
LDHA22N50BAA-300
LDHA23N00BAA-300
LDHA24N00BAA-300
Delay Time
(ns)
0.1
±15%
1.5
±15%
2.0
±15%
1.0
±15%
1.5
±15%
2.0
±15%
2.5
±15%
3.0
±15%
50.0 ns±11.0ns (at 10.0GHz)
60.0 ps±11.0ps (at 10.0GHz)
70.0 ps±11.0ps (at 10.0GHz)
80.0 ps±11.0ps (at 10.0GHz)
90.0 ps±11.0ps (at 10.0GHz)
100.0 ps±11.0% (at 10.0GHz)
120.0 ps±11.0% (at 10.0GHz)
130.0 ps±11.0% (at 10.0GHz)
140.0 ps±11.0% (at 10.0GHz)
150.0 ps±11.0% (at 10.0GHz)
0.1
±0.05ns
0.2
±0.05ns
0.3
±0.05ns
0.4
±0.05ns
0.5
±0.05ns
0.6
±0.1ns
0.7
±0.1ns
0.8
±0.1ns
0.9
±0.1ns
1.0
±0.1ns
1.5
±0.1ns
2.0
±0.1ns
2.5
±0.1ns
3.0
±0.3ns
4.0
±0.4ns
5.0
±0.5ns
6.0
±0.6ns
7.0
±0.7ns
8.0
±0.8ns
9.0
±0.9ns
10.0
±1.0ns
0.1
±0.05ns
0.2
±0.05ns
0.3
±0.05ns
0.4
±0.05ns
0.5
±0.05ns
0.6
±0.1ns
0.7
±0.1ns
0.8
±0.1ns
0.9
±0.1ns
1.0
±0.1ns
0.5
±0.05ns
1.0
±0.1ns
1.5
±0.1ns
2.0
±0.1ns
2.5
±0.1ns
3.0
±0.1ns
4.0
±0.1ns
Impedance
(ohm)
50 (Nominal)
50 (Nominal)
50 (Nominal)
50 (Nominal)
50 (Nominal)
50 (Nominal)
50 (Nominal)
50 (Nominal)
50 (at 10.0GHz) (Nominal)
50 (at 10.0GHz) (Nominal)
50 (at 10.0GHz) (Nominal)
50 (at 10.0GHz) (Nominal)
50 (at 10.0GHz) (Nominal)
50 (at 10.0GHz) (Nominal)
50 (at 10.0GHz) (Nominal)
50 (at 10.0GHz) (Nominal)
50 (at 10.0GHz) (Nominal)
50 (at 10.0GHz) (Nominal)
50 (at 10.0GHz) (Nominal)
50
±7
(at 100MHz)
50
±7
(at 100MHz)
50
±7
(at 100MHz)
50
±7
(at 100MHz)
50
±7
(at 100MHz)
50
±7
(at 100MHz)
50
±7
(at 100MHz)
50
±7
(at 100MHz)
50
±7
(at 100MHz)
50
±7
(at 100MHz)
50
±7
(at 100MHz)
50
±7
(at 100MHz)
50
±7
(at 100MHz)
75 (Nominal)
75 (Nominal)
75 (Nominal)
75 (Nominal)
75 (Nominal)
75 (Nominal)
75 (Nominal)
75 (Nominal)
50
±5
(at 100MHz)
50
±5
(at 100MHz)
50
±5
(at 100MHz)
50
±5
(at 100MHz)
50
±5
(at 100MHz)
50
±5
(at 100MHz)
50
±5
(at 100MHz)
50
±5
(at 100MHz)
50
±5
(at 100MHz)
50
±5
(at 100MHz)
50
±5
(at 100MHz)
50
±5
(at 100MHz)
50
±5
(at 100MHz)
50
±5
(at 100MHz)
50
±5
(at 100MHz)
50
±10
(at 100MHz)
50
±10
(at 100MHz)
Rising Time
(ns)
0.8 max.
1.0 max.
1.5 max.
0.8 max.
1.0 max.
1.5 max.
1.8 max.
2.0 max.
-
-
-
-
-
-
-
-
-
-
-
0.15 max.
0.15 max.
0.15 max.
0.15 max.
0.15 max.
0.3 max.
0.3 max.
0.3 max.
0.3 max.
0.3 max.
0.5 max.
0.5 max.
0.5 max.
2.0 max.
2.5 max.
2.5 max.
3.0 max.
3.5 max.
3.5 max.
4.0 max.
4.5 max.
0.10 max.
0.10 max.
0.15 max.
0.15 max.
0.15 max.
0.15 max.
0.20 max.
0.20 max.
0.20 max.
0.20 max.
0.15 max.
0.20 max.
0.30 max.
0.40 max.
0.40 max.
0.75 max.
1.00 max.
Insulation Resistance Rated Current
(M ohm)
(mA)
100 min.
100 min.
100 min.
100 min.
100 min.
100 min.
100 min.
100 min.
100 min.
100 min.
100 min.
100 min.
100 min.
100 min.
100 min.
100 min.
100 min.
100 min.
100 min.
100 min.
100 min.
100 min.
100 min.
100 min.
100 min.
100 min.
100 min.
100 min.
100 min.
100 min.
100 min.
100 min.
100 min.
100 min.
100 min.
100 min.
100 min.
100 min.
100 min.
100 min.
100 min.
100 min.
100 min.
100 min.
100 min.
100 min.
100 min.
100 min.
100 min.
100 min.
100 min.
100 min.
100 min.
100 min.
100 min.
100 min.
100 min.
50
50
50
50
50
50
50
50
50
50
50
50
50
50
50
50
50
50
50
50
50
50
50
50
50
50
50
50
50
50
50
50
50
50
50
50
50
50
50
50
100
100
100
100
100
100
100
100
100
100
100
100
100
100
100
100
100
LDH43110PKAA-830
110.0 ps±11.0% (at 10.0GHz)
Continued on the following page.
2
Please read rating and
!CAUTION
(for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
!Note
•Please read rating and
!CAUTION
(for storage, operating, rating, soldering, mounting and handling) in this PDF catalog to prevent smoking and/or burning, etc.
•This catalog has only typical specifications. Therefore,thereareno space for detailed specifications. Therefore, please approve our productsheet for product specificaions approval sheet for product specifications before ordering.
This catalog has only typical specifications because you is requested to approve our product specifications or to transact the approval specifications or transact the before ordering.
N91E7.pdf 03.5.13
Continued from the preceding page.
Part Number
LDHA25N00BAA-300
LDHA26N00CAA-300
LDHA27N00CAA-300
LDHA28N00CAA-300
LDHA29N00CAA-300
LDHA210N0CAA-300
Delay Time
(ns)
5.0
±0.1ns
6.0
±0.2ns
7.0
±0.2ns
8.0
±0.2ns
9.0
±0.2ns
10.0
±0.2ns
Impedance
(ohm)
50
±10
(at 100MHz)
50
±10
(at 100MHz)
50
±10
(at 100MHz)
50
±10
(at 100MHz)
50
±10
(at 100MHz)
50
±10
(at 100MHz)
Rising Time
(ns)
1.25 max.
1.50 max.
1.75 max.
2.00 max.
2.25 max.
2.50 max.
Insulation Resistance Rated Current
(M ohm)
(mA)
100 min.
100 min.
100 min.
100 min.
100 min.
100 min.
100
100
100
100
100
100
1
Operating Temperature Range : -40°C to +85°C
s
Group Delay Time
Test sample: LDH65500PAAA-400
0.9
0.8
0.7
G.D.T. (nsec.)
0.6
s
Pulse Response
Test sample: LDH65500PAAA-400
200
Voltage (mV)
150
Input Wave Form
100
Output Wave Form
50
0
0.5
0.4
0.3
0.2
0.1
100M
500M
Frequency (Hz)
1G
3G
0
0.5
1
Time (nsec.)
1.5
2
2.5
3
s
Impedance
Test sample: LDH65500PAAA-400
Frequency Range : 100MHz to 3GHz (Smith Chart)
s
Return Loss
Test sample: LDH65500PAAA-400
50dB
0
-50
100MHz
Frequency Range
3GHz
s
Insertion Loss
Test sample: LDH65500PAAA-400
Insertion Loss (dB)
0
-1
-2
-3
-4
100M
500M
Frequency (Hz)
1G
3G
3
Please read rating and
!CAUTION
(for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
!Note
•Please read rating and
!CAUTION
(for storage, operating, rating, soldering, mounting and handling) in this PDF catalog to prevent smoking and/or burning, etc.
•This catalog has only typical specifications. Therefore,thereareno space for detailed specifications. Therefore, please approve our productsheet for product specificaions approval sheet for product specifications before ordering.
This catalog has only typical specifications because you is requested to approve our product specifications or to transact the approval specifications or transact the before ordering.
N91E7.pdf 03.5.13
1
Soldering and Mounting
s
Standard Land Dimensions
LDH31 Series
1.00
2.60
0.60
1.00
1.5
2.2
1.5
Land
Solder resist
1.5
No pattern
Solder resist
0.2
LDH32 Series
1.00 1.00 1.00
0.3
0.3 0.9 0.8
0.65
0.55
0.70
∗
0.45
0.80
∗
0.60
1.0
Land
Solder resist
No pattern Solder resist
1.25
0.7
0.3
0.4
0.05
0.7
(in mm)
Line width to be designed to match 50Ω characteristic impedance,
depending on PCB material and thickness.
All the technical data and Information contained
herein are subject to change without prior notice.
0.70
0.30
0.30
0.45
1.05
0.25
∗Line
width to be designd to match 50ohm
characteristic impedance, depending
on PCB material and thickness.
All the technical data and Information
contained herein are subject
(in mm)
to change without prior notice.
LDH43 Series
0.6
LDH54 Series
Land
0.37
0.9
1.4
∗
0.37
0.9
Solder resist
No pattern
Solder resist
0.9
2.4
2.2
3.5
∗
∗
3.0
(in mm)
1.4
0.6
1.27
Land
All the technical data and information contained herein are subject to change without prior notice.
∗Line
width to be designed to match 50ohm characteristic
impedance, depending on PCB material and thickness.
6.0
1.0
1.0
(in mm)
LDH65 Series
Land
Solder Resist
No Pattern
Solder Resist
LDHA2 Series
*
*
Land
Solder Resist
No Pattern
Solder Resist
4.0
7.0
* *
0.37
2.17
2.91
4.71
*
Line width to be designed to match 50Ω characteristic
impedance, depending on PCB material and thickness.
1.34
3.74
6.42
6.6
8.82
11.0
(in mm)
*
Line width to be designed to match 50Ω characteristic
impedance, depending on PCB material and thickness.
(in mm)
4
3.3
3.9
8.3
Please read rating and
!CAUTION
(for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
!Note
•Please read rating and
!CAUTION
(for storage, operating, rating, soldering, mounting and handling) in this PDF catalog to prevent smoking and/or burning, etc.
•This catalog has only typical specifications. Therefore,thereareno space for detailed specifications. Therefore, please approve our productsheet for product specificaions approval sheet for product specifications before ordering.
This catalog has only typical specifications because you is requested to approve our product specifications or to transact the approval specifications or transact the before ordering.
When M128 interrupt occurs, the previous interrupt has not been completed, and the next interrupt request comes. At this time, does the processor abandon the next interrupt request and execute the unf...
Operation 2440, extract a picture in C array format and put it into the program. The program can run in RAM, but when the program is downloaded to NAND FLASH, the LCD displays the picture in a mess, a...
Hello everyone, I am working on mb90092 character overlay recently, using the secondary screen display, but no matter how I set it, it is garbled. Can anyone who has used it give me some advice? QQ: 1...
I have collected a list of DOS commands in the quick reference table. For people in the 386 era, most people had no access to computers. DOS commands were the only system tools for communicating with ...
2. System hardware design This system is mainly divided into three parts: video acquisition module, video MPEG-4 encoding module and video transmission module. Its structural block diagram is shown in...
The question is as the title says. Is it 3G, MCU, embedded system, hardware system development, website development or something else? Why is it so popular? Please comment!...
Reflow soldering, a common soldering method in modern electronics manufacturing, primarily melts solder paste and pads to form solder joints. With technological advancements, soldering equipment ha...[Details]
1 Introduction
In the mid-1960s, American scientist Maas conducted extensive experimental research on the charging process of open-cell batteries and proposed an acceptable charging curve for ...[Details]
According to foreign media reports, secondary battery materials company POSCO Future M announced that it has successfully developed two experimental (prototype) positive electrode materials for the...[Details]
Robotics
has become
LiDAR
's "second growth curve."
While LiDAR was still battling with its "pure vision" rivals in the automotive field, another field ignited the demand f...[Details]
The all-new MG4 was recently officially announced on the Ministry of Industry and Information Technology's (MIIT) new vehicle announcement. The all-new MG4's semi-solid-state battery version addres...[Details]
This paper proposes a temperature real-time transmission and display solution based on LED optical data transmission, with Jingwei Yager low-power FPGA HR (Yellow River) series as the main controll...[Details]
Overview
As handheld voice communication devices become more and more popular, they are increasingly used in noisy environments, such as airports, busy roads, crowded bars, etc. In such noisy ...[Details]
On August 21st, BYD announced the launch of its next-generation "Little White Pile" product, the "Lingchong"
charging
pile
, which is now available for general sale. This charging pile feat...[Details]
Intel®
Xeon®
6
-
core processors now support the new Amazon EC2 R8i and R8i-flex instances on Amazon Web Services (AWS).
These new instances offer superior performance and fast...[Details]
Which is better, copper braided wire flexible connector or copper stranded wire flexible connector? When choosing copper wire flexible connector, people always struggle with whether to use copper b...[Details]
The assisted driving industry in 2025 stands at the dual crossroads of "large-scale implementation" and "safety upgrades." Cities like Beijing and Wuhan have already issued regulations de...[Details]
In machine vision systems, light sources play a crucial role. Choosing the right light source is a key factor in determining the success or failure of the entire system. The main purpose of the lig...[Details]
Industrial equipment plays a significant role in improving industrial automation and accelerating production efficiency. Industrial HMIs (Human-Machine Interfaces) serve as a communication platform...[Details]
Compared to gasoline-powered vehicles, electric vehicles have a simpler structure, allowing for greater flexibility in the layout of various components. While electric and gasoline-powered vehicles...[Details]
Yongxin Technology's BCL603S2H chipset integrates the nRF54L15 system-on-chip for monitoring various sensors and achieving seamless wireless connectivity.
Oslo, Norway – August 19, 2...[Details]
Microchip MCU
京公网安备 11010802033920号
EEWORLD
