HCNR200 and HCNR201
High-Linearity Analog Optocouplers
Data Sheet
Lead (Pb) Free
RoHS 6 fully
compliant
RoHS 6 fully compliant options available;
-xxxE denotes a lead-free product
Description
The HCNR200/201 high-linearity analog optocoupler
consists of a high-performance AlGaAs LED that illumi-
nates two closely matched photodiodes. The input pho-
todiode can be used to monitor, and therefore stabilize,
the light output of the LED. As a result, the non-linearity
and drift characteristics of the LED can be virtually elimi-
nated. The output photodiode produces a photocurrent
that is linearly related to the light output of the LED. The
close matching of the photo-diodes and advanced de-
sign of the package ensure the high linearity and stable
gain characteristics of the optocoupler.
The HCNR200/201 can be used to isolate analog signals
in a wide variety of applications that require good stabil-
ity, linearity, bandwidth and low cost. The HCNR200/201
is very flexible and, by appropriate design of the appli-
cation circuit, is capable of operating in many different
modes, including: unipolar/bipolar, ac/dc and inverting/
non-inverting. The HCNR200/201 is an excellent solution
for many analog isolation problems.
Features
Low nonlinearity: 0.01%
K
3
(I
PD2
/I
PD1
) transfer gain
HCNR200: ±15%
HCNR201: ±5%
Low gain temperature coefficient: -65 ppm/°C
Wide bandwidth – DC to >1 MHz
Worldwide safety approval
– UL 1577 recognized (5 kV rms/1 min rating)
– CSA approved
– IEC/EN/DIN EN 60747-5-2 approved
V
IORM
= 1414 V
peak
(option #050)
Surface mount option available (Option #300)
8-Pin DIP package - 0.400” spacing
Allows flexible circuit design
Applications
Low cost analog isolation
Telecom: Modem, PBX
Industrial process control:
Transducer isolator
Isolator for thermocouples 4 mA to 20 mA loop isola-
tion
SMPS feedback loop, SMPS feedforward
Monitor motor supply voltage
Medical
Schematic
1
LED CATHODE
-
V
F
LED ANODE
2
+
I
F
7
NC
8
NC
3
PD1 CATHODE
I
PD1
I
PD2
6
PD2 CATHODE
PD1 ANODE
4
5
PD2 ANODE
CAUTION: It is advised that normal static precautions be taken in handling and assembly
of this component to prevent damage and/or degradation which may be induced by ESD.
Ordering Information
HCNR200/HCNR201 is UL Recognized with 5000 Vrms for 1 minute per UL1577.
Option
RoHS
non RoHS
Compliant Compliant
-000E
-300E
HCNR200
HCNR201
-500E
-050E
-350E
-550E
no option
#300
#500
#050
#350
#550
X
X
X
X
X
Part
Number
Package
400 mil
Widebody
DIP-8
Surface
Mount
X
X
Gull
Wing
X
X
Tape
& Reel
IEC/EN/DIN EN
UL 5000 Vrms/ 60747-5-2
1 Minute rating V
IORM
= 1414 V
peak
X
X
Quantity
42 per tube
42 per tube
750 per reel
X
X
X
X
X
X
X
X
42 per tube
42 per tube
750 per reel
To order, choose a part number from the part number column and combine with the desired option from the option
column to form an order entry.
Example 1:
HCNR200-550E to order product of Gull Wing Surface Mount package in Tape and Reel packaging with IEC/EN/
DIN EN 60747-5-2 V
IORM
= 1414 V
peak
Safety Approval and UL 5000 Vrms for 1 minute rating and RoHS compliant.
Example 2:
HCNR201 to order product of 8-Pin Widebody DIP package in Tube packaging with UL 5000 Vrms for 1 minute rating
and non RoHS compliant.
Option datasheets are available. Contact your Avago sales representative or authorized distributor for information.
Remarks: The notation ‘#XXX’ is used for existing products, while (new) products launched since July 15, 2001 and
RoHS compliant will use ‘–XXXE.’
2
Package Outline Drawings
11.30 (0.445)
MAX.
8
7
6
5
0.20 (0.008)
0.30 (0.012)
A
HCNR200
XXX
yyww
MARKING
9.00
(0.354)
TYP.
11.00
(0.433)
MAX.
10.16
(0.400)
TYP.
0°
15°
*
PIN
ONE
1
2
3
4
1.50
(0.059)
MAX.
5.10 (0.201) MAX.
1
2
LED
NC
NC
8
7
6
5
0.51 (0.021) MIN.
K
1
3
4
K
2
1.70 (0.067)
1.80 (0.071)
3.10 (0.122)
3.90 (0.154)
0.40 (0.016)
0.56 (0.022)
2.54 (0.100) TYP.
PD1
PD2
DIMENSIONS IN MILLIMETERS AND (INCHES).
MARKING :
XXX = 050 ONLY if option #050,#350,#550 (or -050,-350,-550)
ordered (otherwise blank)
yy
- Year
ww
- Work Week
Marked with black dot - Designates Lead Free option E
*
- Designates pin 1
NOTE: FLOATING LEAD PROTRUSION IS 0.25 mm (10 mils) MAX.
Figure 1a. 8 PIN DIP
3
Solder Reflow Temperature Profile
300
PREHEATING RATE 3
°C
+ 1
°C/–0.5 °C/SEC.
REFLOW HEATING RATE 2.5
°C
± 0.5
°C/SEC.
PEAK
TEMP.
245
°C
PEAK
TEMP.
240
°C
200
TEMPERATURE (°C)
160
°C
150
°C
140
°C
3
°C
+ 1
°C/–0.5 °C
100
2.5 C ± 0.5
°C/SEC.
30
SEC.
30
SEC.
PEAK
TEMP.
230
°C
SOLDERING
TIME
200
°C
PREHEATING TIME
150
°C,
90 + 30 SEC.
50 SEC.
TIGHT
TYPICAL
LOOSE
ROOM
TEMPERATURE
0
0
50
100
TIME (SECONDS)
NOTE: NON-HALIDE FLUX SHOULD BE USED.
150
200
250
Recommended Pb-Free IR Profile
TIME WITHIN 5
°C
of ACTUAL PEAK TEMPERATURE
t
p
T
p
T
L
TEMPERATURE
T
smax
T
smin
t
s
PREHEAT
60 to 180 SEC.
25
t
L
60 to 150 SEC.
* 245 +0/-5
°C
217
°C
150 - 200
°C
RAMP-UP
3
°C/SEC.
MAX.
RAMP-DOWN
6
°C/SEC.
MAX.
NOTES:
THE TIME FROM 25
°C
to PEAK
TEMPERATURE = 8 MINUTES MAX.
T
smax
= 200
°C,
T
smin
= 150
°C
NOTE: NON-HALIDE FLUX SHOULD BE USED.
t 25
°C
to PEAK
TIME
15 SEC.
Regulatory Information
The HCNR200/201 optocoupler features a 0.400” wide, eight pin DIP package. This package was specifically designed
to meet worldwide regulatory requirements. The HCNR200/201 has been approved by the following organizations:
UL
Recognized under UL 1577, Component Recognition
Program, FILE E55361
CSA
Approved under CSA Component Acceptance Notice
#5, File CA 88324
IEC/EN/DIN EN 60747-5-2
Approved under
IEC 60747-5-2:1997 + A1:2002
EN 60747-5-2:2001 + A1:2002
DIN EN 60747-5-2 (VDE 0884 Teil 2):2003-01
(Option 050 only)
5
FPGA/CPLD
京公网安备 11010802033920号
EEWORLD
