WINSLOW ADAPTICs
Data Sheet
Screw Machined Wire Wrap I.C. Sockets
W30600TRC3 - W30600T3 - W30600G3
W30600TTRC3
The W30600 Series uses a screw machined half hard
brass outer pin with a beryllium copper contact. The
Outer pin has 3 plating options; RoHS compliant Tin,
Tin/Lead or Gold. The beryllium copper contact can be
Gold or pure Tin.
Moulding material is 30%GF PBT rated to UL 94 V-0 and
features include a pin incorporating a straight knurled barrel to alleviate pin
rotation during the wrapping process.
The following table explains the plating options for the range.
SUFFIX
TRC
T
G
TTRC
OUTER PLATING
Pure Tin (RHoS
Compliant)
Tin Lead
Gold
Pure Tin (RHoS
Compliant)
CONTACT PLATING
Gold
Gold
Gold
Pure Tin (RHoS
Compliant)
* Point of contact
** Plugable Depth
*
2.66
B
1.35 Dia
0.64square
4.10**
A
1.95
3.0
13
ALL DIMENSIONS IN MM UNLESS OTHERWISE STATED
WINSLOW ADAPTICs
Data Sheet
Screw Machined Wire Wrap I.C. Sockets
W30600TRC3 - W30600T3 - W30600G3 - W30600TTRC3
General Specifications.
Unless stated all values are typical.
Contact
Resistance:
Capacitance:
*Plating: Outer;
See test results below.
Current Rating:
5.0 amps
0.35pF max
Material:
Brass outer, beryllium copper inner.
W30600TRC3
Nickel 2.5Um/Pure Tin 6.0Um
W30600T3
60/40 tin/lead 2-3Um.
W30600G3
Nickel 2.5Um/Gold 0.1Um
W30600TTRC3
Nickel 2.5Um/Pure Tin 6.0Um
*Plating: Inner;
W30600TRC3
Nickel 2.5Um/Gold 0.1Um
W30600T3
Nickel 2.5Um/Gold 0.1Um
W30600G3
Nickel 2.5Um/Gold 0.1Um
W30600TTRC3
Nickel 2.5Um/ Pure Tin 0.1Um
Note: Other plating specs available. Please contact sales@winslowadaptics.com with your requirements.
Insertion Force:
Withdrawal Force:
Force to remove from moulding:
Moulding
Material:
Insulation Resistance:
Arc Resistance:
Electrical Strength:
Dielectric Constant:
Glass-reinforced Polyester (PBT)
1010 Ohms (contact to contact) at 500VDC
145 seconds at 23 degrees C
121KV/cm at 23 degrees C
3.9 (48 hrs 90%RH) at 100Hz 23 degrees C
4.5 at 100Hz 121 degrees C
3.7 (48 hrs 90%RH) at 1MHz 23 degrees C
4.3 at 1MHz 121 degrees C
0.0077 (48 hrs 30%RH) at 100Hz 23 degrees C
0.0300 at 100Hz 121 degrees C
0.0150 (48 hrs 30%RH) at 1MHz 23 degrees C
0.0200 at 1MHz 121 degrees C
3 x 1013ohms-CM (48 hrs 90%RH) at 25 degrees C
1013ohms-CM at 121 degrees C
-65 to 150 degrees C
UL94V-0
350 grams per pin 0.018” diameter
250 grams per pin 0.018” diameter.
12lb minimum
Dissipation Factor:
Volume Resistivity:
Operating Temperature:
Flammability:
Note: Dimensions are subject to change without prior notice.
sales@winslowadaptics.com
DIP Support products from Winslow Adaptics
www.winslowadaptics.com
Custom Upgrades
Package
Conversion
Pitch Change
Also available from Winslow Adaptics are cost effective, time saving solutions to test, obsolescence,
supply problems and upgrades. OEMs can upgrade equipment with custom Adaptics utilising addi-
tional logic, often saving considerable cost and time on re-design. If lead-time becomes an issue con-
tact us for a suitable package convertor. We specialise in conversion of all package lead-frames.