EEWORLDEEWORLDEEWORLD

Part Number

Search

S6H2-3-H

Description
SP6T, 10MHz Min, 500MHz Max, 1.4dB Insertion Loss-Max, HERMETIC SEALED, CASE S6-3
CategoryWireless rf/communication    Radio frequency and microwave   
File Size306KB,2 Pages
ManufacturerCobham PLC
Download Datasheet Parametric View All

S6H2-3-H Overview

SP6T, 10MHz Min, 500MHz Max, 1.4dB Insertion Loss-Max, HERMETIC SEALED, CASE S6-3

S6H2-3-H Parametric

Parameter NameAttribute value
MakerCobham PLC
Objectid8004642019
Reach Compliance Codeunknown
compound_id207301380
Other featuresSMA-F, TTL COMPATIBLE
Characteristic impedance50 Ω
structureCOAXIAL
Maximum input power (CW)30 dBm
Maximum insertion loss1.4 dB
JESD-609 codee4
Maximum operating frequency500 MHz
Minimum operating frequency10 MHz
Maximum operating temperature85 °C
Minimum operating temperature-55 °C
RF/Microwave Device TypesSP6T
Terminal surfaceGOLD
Maximum voltage standing wave ratio1.5
S6H2 Pin Diode Switch
Single Pole, Six Throw
Absorptive
Features:
Incorporated TTL-compatible driver for
convenient system integration and operates
from +5 V and -15 V DC power supplies.
DC blocks at all RF ports.
Ruggedized construction.
RoHS-compliant versions available.
Hermetic versions available.
Specifications:
Parameter
Frequency Range
Insertion Loss (max)
VSWR (max) 50 ohms
Isolation (min)
Switching Speed (max)
CW RF Power, Operating (max)
Specification
0.01 – 0.5
1.4
1.5
80
250
1
Case Styles:
Finish:
Bias & Control Pins:
Weight:
Mounting:
Units
GHz
dB
ratio
dB
nsec
W
Notes:
DC Bias:
(Standard)
DC Bias:
(-5 option)
DC Bias:
(-12 option)
Control:
+5 V +/- 0.5 V @ 240 mA max
-15 V +/- 3 V @ 50 mA max
+5 V +/- 0.5 V @ 300 mA max
-5 V +/- 0.5 V @ 60 mA max
+15 V +/- 3 V@ 240 mA max
-15 V +/- 3 V @ 50 mA max
TTL 0 = Low Loss
TTL 1 = Isolation
E1 controls J2 – J1
E2 controls J3 – J1
E3 controls J4 – J1
E4 controls J5 – J1
E5 controls J6 – J1
E6 controls J7 – J1
Mechanical Specifications:
S6 Outline (Six bit control)
S6-3 Outline (Three bit control)
Gold Plate per MIL-G-45204
ø0.02” x 0.15” long
65 g max
ø0.10” through holes
(2) places
E3 E2 E1
0
0 0
0
0 1
0
1 0
0
1 1
1 0 0
1 0 1
1 1 0
1 1 1
Low Loss Path
J2 - J1
J3 - J1
J4 - J1
J5 - J1
J6 - J1
J7 - J1
ALL OFF
ALL OFF
Three Bit Control:
(-3 option)
Absorptive Switch: 50 ohm termination present at J2, J3, J4, J5, J6
and J7 (in isolation mode).
Switching speed is defined as 50% TTL to 90% RF (t-on) and 50%
TTL to 10% RF (t-off).
Environmental Specifications:
MIL-E-5400, MIL-STD-202, MIL-E-16400
Operating Temp:
-55 °C to +85 °C
Storage Temp:
-65 °C to +125 °C
Humidity:
MIL-STD-202F, M103, Cond B
Shock:
MIL-STD-202F, M213, Cond B
Altitude:
MIL-STD-202F, M105, Cond B
Vibration:
MIL-STD-202F, M204, Cond B
Thermal Shock:
MIL-STD-202F, M107, Cond A
Temperature Cycle:
MIL-STD-202F, M105C, Cond D
Screening:
Internal Visual per MIL-STD-883, Method 2017
Temperature Cycle: -65 °C to +100 °C, 10 cycles
Hermetically-sealed switches are fine and gross leak checked per
MIL-STD-883, Method 1014.
Optional High-Rel screening available upon request. Contact the
factory to discuss your screening requirements.
SIGNAL & CONTROL SOLUTIONS
Revision Date: 2/28/2014
40 Industrial Way East, Eatontown , NJ 07724 [USA]
Phone: (732) 460-0212, Fax: (732) 460-0214
www.aeroflex.com/ascs, email: ascs-sales@aeroflex.com
The problem of balanced resistance at the input of the common-mode proportional amplifier
[size=5] The circuit prototype of the common-mode proportional amplifier is as follows. The diagram is taken from the Internet (please contact us to delete if there is any infringement. See Note 1 for...
Jacktang Analogue and Mixed Signal
Does anyone know the ST technical support phone number?
It's too slow to find the answer on the Internet. It will be faster to contact technical support directly. If anyone knows the phone number, please tell me...
moneyhui19 stm32/stm8
2. Simulate switch lights
2. Simulate the switch light 1. Experimental task As shown in Figure 4.2.1, monitor the switch K1 (connected to the P3.0 port) and use the light-emitting diode L1 (connected to the P1.0 port of the mi...
liuyong1989 Power technology
How to read mpu9250 acceleration in FPGA
I am a beginner. I want to use FPGA to read the acceleration of mpu9250 in iic mode. I am using nexys3 development board. I have encountered problems with the board connection. I am here to ask for ad...
QD_aun34 FPGA/CPLD
Looking for someone to develop: driver implemented by Libusb
Background: The USB device is implemented by STM32 microcontroller; The driver on Linux is implemented by Libusb; The program data communication is completely fine; The following functions are impleme...
havefun9120 Linux and Android
Raspberry Pi PICO and Firefly Jar
From: https://www.raspberrypi.org/blog/neopixel-fireflies-jar-with-raspberry-pi-hackspace-39/...
dcexpert MicroPython Open Source section

EEWorld
subscription
account

EEWorld
service
account

Automotive
development
circle

Robot
development
community

Index Files: 161  287  1524  2485  1900  4  6  31  51  39 
Datasheet   0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z
Room 1530, 15th Floor, Building B, No. 18 Zhongguancun Street, Haidian District, Beijing Telephone: (010) 82350740 Postal Code: 100190
Copyright © 2005-2026 EEWORLD.com.cn, Inc. All rights reserved 京ICP证060456号 京ICP备10001474号-1 电信业务审批[2006]字第258号函 京公网安备 11010802033920号