High-Performance Single-Mode Angled
MTP® Cable Assemblies for OEM Applications
Description
Corning Cable Systems’ High-Performance Single-mode
Angled MTP
®
Cable Assemblies provide a reliable, low loss
connection for up to 12 single-mode optical fibers in a compact,
push-pull housing. Two MTP connectors are mated using a
low-profile bulkhead or PC card-mounted adapter; alignment is
achieved with precision guide pins. Connection is assured by the
spring-action side latch housing – simply push on and pull off.
Assemblies are available in ribbon, ribbon interconnect, flame-
retardant, and outside plant constructions.
Corning
Cable Systems
Features / Benefits
• Designed for OEM marketplace
• Available with 4-, 8-, or 12-fiber single-mode ferrule
• Meets IEC standard 61754-7
• Meets TIA/EIA 604-5 Type MPO
• Designed and tested to Telcordia-GR-1435
• 8˚ angled polish
• Insertion Loss: 0.25 dB typical, 0.75 dB maximum
• High-precision stainless steel guide pins with
guaranteed retention
• High-density connection: 25 mm x 10 mm
• User-friendly push-pull housing
• Segmented boot provides cable bend relief
• All fibers are 100% factory tested for insertion
loss and reflectance
• Fan-outs are available with simplex terminations
MTP Angled Connector
| CCA120
MTP Angled Connector
|
ZA-1567
Product Specifications
High-Performance Single-Mode Angled
MTP® Cable Assemblies for OEM Applications
Ordering Information
s s s ss s
R
s s s s s s s s
1
2
3
4
5
6
7
8
Corning
Cable Systems
1
Select connector code for first end.
89 = Single-mode MTP
®
Angled Connector with pins
90 = Single-mode MTP Angled Connector without pins
2
Select connector code for second end.
89 = Single-mode MTP Angled Connector with pins
90 = Single-mode MTP Angled Connector without pins
3
Select fiber count.
04 = 4 fibers
08 = 8 fibers
12 = 12 fibers
4
Select single-mode designation.
R = Ribbon in matrix
5
Select ribbon designation.
XX = Ribbon in matrix (bare ribbon)
J1 = Interconnect ribbon/riser
J8 = Interconnect ribbon/plenum
6
Select OEM designation.
E1 = Single-ended testing, random mate, traditional boot
SM IL = .75 dB max (@1310 nm)
RL = -55 dB max
E2 = E1 + 1550 nm testing (in place of 1310 nm testing)
E3 = E1 + Geometry and End-face Angles
E5 = E2 + Geometry and End-face Angles
7
8
Select Tip-to-Tip Length (example: 001, 010, or 100).
Select Length Unit.
M = Meters
F = Feet
Corning Cable Systems LLC • PO Box 489 • Hickory, NC 28603-0489 USA
1-800-743-2675 • FAX: 828-901-5973 • International: 828-901-5000 • http://www.corning.com/cablesystems
Corning Cable Systems reserves the right to improve, enhance, and modify the features and specifications of Corning Cable Systems’ products
without prior notification. MTP is a registered trademark of USConec Ltd. All other trademarks are the properties of their respective owners.
Corning Cable Systems is ISO 9001 certified. © 1999, 2002 Corning Cable Systems. All rights reserved. Published in the USA.
CCA-156-EN / February 2002 / pdf
stm32/stm8
京公网安备 11010802033920号
EEWORLD
