82563EB/82564EB Gigabit Platform LAN
Connect
Networking Silicon
Datasheet
Product Features
■
■
■
■
■
■
■
■
■
IEEE 802.3ab compliant
— Robust operation over the installed base of
Category-5 (Cat-5) twisted pair cabling
PICMG 3.1 compliant
— Robust operation in backplane over
Ethernet applications.
Support for cable line lengths greater than
100 m (spec); 123 m physical
— Robust end to end connections over
various cable lengths
Full duplex at 10, 100, or 1000 Mb/s and half
duplex at 10 or 100 Mb/s.
IEEE 802.3ab Auto-negotiation with Next
Page support
— Automatic link configuration including
speed, duplex, and flow control
10/100 downshift
— Automatic link speed adjustment with
poor quality cable
Automatic MDI crossover
— Helps to correct for infrastructure issues
Advanced Cable Diagnostics
— Improved end-user troubleshooting
Kumeran interface
— Low pin count, high speed interface to the
Intel® 631xESB/632xESB I/O Controller
Hub
■
■
■
■
■
■
■
— Allows PHY placement proximity to I/O
back panel.
7 LED outputs per port (4 configurable plus 3
dedicated)
— Link and Activity indications (10, 100,
1000 Mb/s) on each port
Clock supplied to the 631xESB/632xESB
— Cost optimized design
Full chip power down
— Support for lowest power state
100 pin TQFP Package
— Smaller footprint and lower power
dissipation compared to multi-chip MAC
and PHY solutions
Operating temperature: 0°C to 60° C
(maximum) – heat sink or forced airflow not
required
— Simple thermal design
Power Consumption: < 1.0 Watts per port
(silicon power)
— Minimize impact of incorporating dual
Gigabit instead of Fast Ethernet
Leaded and lead-free
a
100-pin TQFL with an
Exposed-Pad*. Devices that are lead-free are
marked with a circled “e3” and have a
product code: HYXXXXX
a.This device is lead-free. That is, lead has not been intentionally added, but lead may still exist as an impurity at <1000 ppm.
The Material Declaration Data Sheet, which includes lead impurity levels and the concentration of other Restriction on Hazard-
ous Substances (RoHS) -banned materials, is available at:
ftp://download.intel.com/design/packtech/material_content_IC_Pack
In addition, this device has been tested and conforms to the same parametric specifications as previous versions of the device.
For more information regarding lead-free products from Intel Corporation, contact your Intel Field Sales representative.
316534-004
Revision 2.9
82563EB/82564EB Gigabit Platform LAN Connect Networking Silicon
Revision History
Date
Nov 2007
Oct 2007
April 2007
Feb 2007
May 2006
April 2006
Revision
2.9
2.8
2.7
2.6
2.5
2.1
Comments
Updated Tables 19, 20, 23, and 24. Updated Figures 5
and 6.
Updated Table 16 “Recommended Operating Conditions”.
Updated Section 4.2, Table 16 “Core Digital Voltage
Range”.
Updated Table 6.
Initial public release.
Removed “Preliminary” from section 4.9 “Power
Consumption”.
Updated 1.9V external power supply parameters in Tables
16 and 19.
Nov 2005
Aug 2005
2.0
1.75
Initial release (Intel Confidential).
Added lead-free information.
Added measured power consumption values.
Updated crystal specifications (drive level now 750
µW).
Changed 1.8V power rail references to 1.9V.
Dec 2004
Sep 2004
Jul 2004
May 2004
1.0
0.70
0.51
0.5
Major revisions in all sections.
Added power sequencing.
Changed pin 51 (page13) from AVDD (1.8V) to AVDDR
(3.3V).
Initial release (Intel Secret).
Legal Notice
INFORMATION IN THIS DOCUMENT IS PROVIDED IN CONNECTION WITH INTEL® PRODUCTS. NO LICENSE, EXPRESS OR IMPLIED, BY
ESTOPPEL OR OTHERWISE, TO ANY INTELLECTUAL PROPERTY RIGHTS IS GRANTED BY THIS DOCUMENT. EXCEPT AS PROVIDED IN
INTEL'S TERMS AND CONDITIONS OF SALE FOR SUCH PRODUCTS, INTEL ASSUMES NO LIABILITY WHATSOEVER, AND INTEL DISCLAIMS
ANY EXPRESS OR IMPLIED WARRANTY, RELATING TO SALE AND/OR USE OF INTEL PRODUCTS INCLUDING LIABILITY OR WARRANTIES
RELATING TO FITNESS FOR A PARTICULAR PURPOSE, MERCHANTABILITY, OR INFRINGEMENT OF ANY PATENT, COPYRIGHT OR OTHER
INTELLECTUAL PROPERTY RIGHT.
Intel products are not intended for use in medical, life saving, life sustaining, critical control or safety systems, or in nuclear facility applications.
Intel may make changes to specifications and product descriptions at any time, without notice.
This document contains information on products in the design phase of development. The information here is subject to change without notice. Do not
finalize a design with this information.
Designers must not rely on the absence or characteristics of any features or instructions marked "reserved" or "undefined." Intel reserves these for
future definition and shall have no responsibility whatsoever for conflicts or incompatibilities arising from future changes to them.
The 82563EB/82564EB Gigabit Platform LAN Connects discussed in this document may contain design defects or errors known as errata which may
cause the product to deviate from published specifications. Current characterized errata are available on request.
Contact your local Intel sales office or your distributor to obtain the latest specifications and before placing your product order.
Copies of documents which have an ordering number and are referenced in this document, or other Intel literature, may be obtained from:
Intel Corporation
P.O. Box 5937
Denver, CO 80217-9808
or call in North America 1-800-548-4725, Europe 44-0-1793-431-155, France 44-0-1793-421-777, Germany 44-0-1793-421-333, other Countries 708-
296-9333.
Intel® is a trademark or registered trademark of Intel Corporation or its subsidiaries in the United States and other countries.
*Other names and brands may be claimed as the property of others.
Copyright © Intel Corporation, 2007
ii
82563EB/82564EB Gigabit Platform LAN Connect Networking Silicon
Contents
1.0
Introduction......................................................................................................................... 1
1.1
1.2
1.3
2.0
3.0
Document Scope................................................................................................... 1
Reference Documents...........................................................................................1
Product Codes....................................................................................................... 2
Block Diagrams .................................................................................................................. 3
Signal Descriptions............................................................................................................. 5
3.1
3.2
3.3
3.4
3.5
3.6
3.7
3.8
3.9
3.10
3.11
3.12
3.13
3.14
3.15
Signal Type Definitions.......................................................................................... 5
Shared PHY Pins .................................................................................................. 6
MDIO Interface ...................................................................................................... 6
Port A PHY Interface ............................................................................................. 7
Port A Kumeran Interface...................................................................................... 8
Port A LEDs........................................................................................................... 8
Reset, Power Down, and Initialization Signals ...................................................... 9
JTAG and IEEE Interface ...................................................................................... 9
Reserved Signals ................................................................................................10
Voltage Control Pins............................................................................................10
Clock Generator Interface ...................................................................................11
Power/Ground Pins .............................................................................................11
Port B PHY Interface ...........................................................................................13
Port B Kumeran Interface....................................................................................14
Port B LEDs.........................................................................................................15
Absolute Maximum Ratings.................................................................................17
Recommended Operating Conditions .................................................................17
DC and AC Characteristics .................................................................................17
Power Supply Connections .................................................................................18
4.4.1 External LVR Power Delivery .................................................................18
4.4.2 Power Sequencing with External Regulators .........................................20
4.4.3 Internally-Generated Power Delivery .....................................................21
4.4.4 Internal LVR Power Sequencing ............................................................22
Link (MDI) Interface.............................................................................................26
Kumeran (Serial) Interface ..................................................................................27
4.6.1 Transmit .................................................................................................27
4.6.2 Receive ..................................................................................................28
4.6.3 Electrical Idle ..........................................................................................29
Crystal ................................................................................................................31
4.7.1 External Clock Oscillator .......................................................................31
Reset and Initial Clock Timing.............................................................................32
Power Consumption ............................................................................................33
Package Information ...........................................................................................37
Thermal Specifications ........................................................................................39
Pinout Information ...............................................................................................40
4.0
Voltage, Temperature and Timing Specifications.............................................................17
4.1
4.2
4.3
4.4
4.5
4.6
4.7
4.8
4.9
5.0
5.1
5.2
5.3
Package and Pinout Information ......................................................................................37
iii
82563EB/82564EB Gigabit Platform LAN Connect Networking Silicon
5.4
5.5
Interface Diagrams.............................................................................................. 43
Visual Pin Assignments....................................................................................... 44
Figures
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
82563EB Dual Port Block Diagram ....................................................................... 3
82564EB Single Port Block Diagram .................................................................... 3
82563EB/82564EB power up sequencing with external regulators .................... 21
82563EB/82564EB power up sequencing with internal regulators ..................... 23
82563EB 1.9V and 1.2V internal LVR schematic................................................ 26
82564EB 1.9V and 1.2V internal LVR schematic............................................... 26
Kumeran (Serial) Transmit Eye Diagram ............................................................ 28
Kumeran (Serial) Receive Eye Diagram ............................................................. 29
External Clock Oscillator Connectivity to 82563EB/82564EB............................. 31
82563EB/82564EB Reset Timing ....................................................................... 32
Mechanical Information ....................................................................................... 37
Mechanical Specifications and Notes ................................................................. 38
82563EB/82564EB Interfaces............................................................................. 43
82563EB Dual Port Gigabit Platform LAN connect Pinout (Top View) ............... 44
82564EB Single Port Gigabit Platform LAN Connect Pinout (Top View) ............ 45
Tables
1
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
Product Ordering Codes ....................................................................................... 2
Shared PHY Pins .................................................................................................. 6
MDIO Interface Pins.............................................................................................. 6
Port A PHY Interface Pins..................................................................................... 7
Port A Kumeran Interface Pins.............................................................................. 8
Port A LEDs .......................................................................................................... 8
Reset and Power Down Signals............................................................................ 9
JTAG Signals ........................................................................................................ 9
Test Signals ........................................................................................................ 10
Voltage Control Pins ........................................................................................... 10
Clock Generator Related Signals........................................................................ 11
Power/Ground Pins ............................................................................................. 11
Port B PHY Interface Pins................................................................................... 13
Port B Kumeran Interface Pins............................................................................ 14
Port B LEDs ........................................................................................................ 15
Absolute Maximum Ratings ............................................................................... 17
Recommended Operating Conditions ................................................................. 17
DC and AC Characteristics ................................................................................. 17
3.3V External Power Supply Parameters ............................................................ 19
1.9V External Power Supply Parameters ............................................................ 19
1.2V External Power Supply Parameters ............................................................ 20
3.3V External Power Supply Parameters........................................................... 21
82563EB/82564EB BOM (Bill of
Material) of Components for Internal Regulator .................................................. 23
1.9V Internal LVR Specification .......................................................................... 24
1.2V Internal LVR Specification .......................................................................... 24
PNP Specification ............................................................................................... 25
Link (MDI) Interface Electrical Specification........................................................ 26
Kumeran (Serial) Transmit Specifications ........................................................... 27
iv
82563EB/82564EB Gigabit Platform LAN Connect Networking Silicon
28
29
30
31
32
33
34
35
36
37
38
39
Kumeran (Serial) Receive Specifications ............................................................28
Kumeran (Serial) Electrical Idle Detection...........................................................30
Kumeran (Serial) Electrical Idle Output ...............................................................30
Crystal Parameters..............................................................................................31
Specification for External Clock Oscillator...........................................................32
Reset Specification..............................................................................................33
Power Supply Characteristics - D0a (Both Ports) ...............................................34
Power Supply Characteristics - D3cold - Wake Up Enabled (Both Ports)...........34
Power Supply Characteristics - Uninitialized/Disabled........................................34
Power Supply Characteristics - Complete Subsystem ........................................35
Thermal Characteristics ......................................................................................39
82563EB/82564EB Pinout by Pin Number Order...............................................40
v
ST MEMS Sensor Creative Design Competition
京公网安备 11010802033920号
EEWORLD
