Assuming the clock cycle is 40ns, the state changes of my sequential circuit are about 80ns, 160ns, 160ns, 40ns. In a state, it relies on counting loops to stay in this state until the loop count meet...
[color=#000] You need a voltage reference, but you’re not sure how to choose the best one for your application. Then you’ve come to the right place! In this blog post, I’ll discuss some key voltage re...
POR&PUC POR is the power-on reset signal, which is only generated when the following three events occur: 1. The chip is powered on. 2. -RST/NMI is set to reset mode, and a low-level signal appears on ...
LIN Local Interconnect Network is a low-speed, maximum 20 kBaud, Class A serial bus protocol. LIN sub-buses can be used for modules such as seats, doors, roof, control panels, steering wheels, etc. It...