DSPIC33EP256GM306T-E/PT datasheet, PDF

Datasheet> All Categories > The embedded processor and controller> Microcontrollers and processors> DSPIC33EP256GM306T-E/PT

Preview

DSPIC33EP256GM306T-E/PT: DescriptionMICROCONTROLLER; CategoryThe embedded processor and controller Microcontrollers and processors; File Size4MB，538 Pages; ManufacturerMicrochip; Websitehttps://www.microchip.com

Download Datasheet Parametric View All

DSPIC33EP256GM306T-E/PT Overview

MICROCONTROLLER

DSPIC33EP256GM306T-E/PT Parametric

Parameter Name	Attribute value
Maker	Microchip
package instruction	TQFP-64
Reach Compliance Code	compliant
Has ADC	YES
Other features	60 MIPS, ADC ALSO SUPPORTS 10-BIT RESOLUTION, AEC-Q100 PLANNED
Address bus width
bit size	16
maximum clock frequency	60 MHz
DAC channel	NO
DMA channel	YES
External data bus width
JESD-30 code	S-PQFP-G64
length	10 mm
Number of I/O lines	53
Number of terminals	64
On-chip program ROM width	8
Maximum operating temperature	125 °C
Minimum operating temperature	-40 °C
PWM channel	YES
Package body material	PLASTIC/EPOXY
encapsulated code	TFQFP
Package shape	SQUARE
Package form	FLATPACK, THIN PROFILE, FINE PITCH
RAM (bytes)	32768
rom(word)	262144
ROM programmability	FLASH
Filter level	TS 16949
Maximum seat height	1.2 mm
Maximum supply voltage	3.6 V
Minimum supply voltage	3 V
Nominal supply voltage	3.3 V
surface mount	YES
technology	CMOS
Temperature level	AUTOMOTIVE
Terminal form	GULL WING
Terminal pitch	0.5 mm
Terminal location	QUAD
width	10 mm
uPs/uCs/peripheral integrated circuit type	MICROCONTROLLER

Preview

Download Datasheet

View All

dsPIC33EPXXXGM3XX/6XX/7XX

16-Bit Digital Signal Controllers with High-Speed PWM,

Op Amps and Advanced Analog Features

Operating Conditions

• 3.0V to 3.6V, -40°C to +85°C, up to 70 MIPS

• 3.0V to 3.6V, -40°C to +125°C, up to 60 MIPS

Timers/Output Compare/Input Capture

• 21 General Purpose Timers:

- Nine 16-bit and up to four 32-bit timers/counters

- Eight output capture modules configurable as

timers/counters

- PTG module with two configurable timers/counters

- Two 32-bit Quadrature Encoder Interface (QEI)

modules configurable as a timer/counter

• Eight Input Capture modules

• Peripheral Pin Select (PPS) to allow Function Remap

• Peripheral Trigger Generator (PTG) for Scheduling

Complex Sequences

Core: 16-Bit dsPIC33E CPU

•

Code-Efficient (C and Assembly) Architecture

Two 40-Bit Wide Accumulators

Single-Cycle (MAC/MPY) with Dual Data Fetch

Single-Cycle Mixed-Sign MUL plus Hardware Divide

32-Bit Multiply Support

Clock Management

•

Internal Fast FRC Oscillator with 1% Accuracy

Programmable PLLs and Oscillator Clock Sources

Fail-Safe Clock Monitor (FSCM)

Independent Watchdog Timer (WDT)

Fast Wake-up and Start-up

Communication Interfaces

• Four Enhanced Addressable UART modules

(17.5 Mbps):

- With support for LIN/J2602 protocols and IrDA

• Three 3-Wire/4-Wire SPI modules (15 Mbps)

• 25 Mbps Data Rate for Dedicated SPI module

(with no PPS)

• Two I

C™ modules (up to 1 Mbps) with SMBus Support

• Two ECAN™ modules (1 Mbps) with CAN 2.0B Support

• Programmable Cyclic Redundancy Check (CRC)

• Codec Interface module (DCI) with I

S Support

Power Management

•

Low-Power Management modes (Sleep, Idle, Doze)

Executing Optimized

NOP

String with Flash Fetch

Integrated Power-on Reset and Brown-out Reset

0.6 mA/MHz Dynamic Current (typical)

30 µA I

Current (typical)

High-Speed PWM

• Up to 12 PWM Outputs (six generators)

• Primary Master Time Base Inputs allow Time Base

Synchronization from Internal/External Sources

• Dead Time for Rising and Falling Edges

• 7.14 ns PWM Resolution

• PWM Support for:

- DC/DC, AC/DC, Inverters, PFC, Lighting

- BLDC, PMSM, ACIM, SRM

• Programmable Fault Inputs

• Flexible Trigger Configurations for ADC Conversions

• Supports PWM Lock, PWM Output Chopping and

Dynamic Phase Shifting

Direct Memory Access (DMA)

• 4-Channel DMA with User-Selectable Priority Arbitration

• Peripherals Supported by the DMA Controller include:

- UART, SPI, ADC, ECAN and input capture

- Output compare and timers

Input/Output

• Sink/Source 15 mA or 10 mA, Pin-Specific for

Standard V

• 5V Tolerant Pins

• Selectable Open-Drain, Pull-ups and Pull-Downs

• Up to 5 mA Overvoltage Clamp Current

• Change Notice Interrupts on All I/O Pins

• PPS to allow Function Remap

Advanced Analog Features

• Two Independent ADC modules:

- Configurable as 10-bit, 1.1 Msps with

four S&H or 12-bit, 500 ksps with one S&H

- 11, 13, 18, 30 or 49 analog inputs

• Flexible and Independent ADC Trigger Sources

• Up to Four Op Amp/Comparators with Direct

Connection to the ADC module:

- Additional dedicated comparator

- Programmable references with 32 voltage points

- Programmable blanking and filtering

• Charge Time Measurement Unit (CTMU):

- Supports mTouch™ capacitive touch sensing

- Provides high-resolution time measurement (1 ns)

- On-chip temperature measurement

Qualification and Class B Support

• AEC-Q100 REVG (Grade 1 -40°C to +125°C) Planned

• AEC-Q100 REVG (Grade 0 -40°C to +150°C) Planned

• Class B Safety Library, IEC 60730

Debugger Development Support

•

In-Circuit and In-Application Programming

Three Complex and Five Simple Breakpoints

IEEE 1149.2 Compatible (JTAG) Boundary Scan

Trace and Run-Time Watch



2013 Microchip Technology Inc.

DS70000689C-page 1

Recommended Resources

Circuit diagram for overvoltage protection using the principle of overheating caused by overvoltage

555 AC timing switch controller circuit

-24V, 0.5A regulated power supply circuit

High current NOT gate driving grounded load

Computer motherboard circuit diagram 440LX2_29

LED display circuit design driven by LED-74HC164 (common anode)

Digital tube: Help with eight-digit digital tubes that display 0-F in a loop...; xgwan 51mcu

Are you obedient? Two types of people your boss doesn't like: One type is a stubborn person, and the reason is self-evident. The other type is a yes-man, because the boss will not get any inspiration from you. It is not easy to strike a balance between these two...; 向农 Talking about work

Baud rate calculation: The crystal oscillator of the 51 single-chip microcomputer is: 11.09520MHZ. If you want to generate a baud rate of 9600bps, here is the formula I found on the Internet: Baud rate = 1/16 or 1/32*(frequ...; wiln Embedded System

This is how the teacher taught us microcontrollers (transferred): This is how the teacher taught us microcontrollers (reposted) Seeing that many netizens are asking how to improve their abilities, I would like to talk about my own learning process. I studied communi...; sunshine0410 Electronics Design Contest

Why does a computer become slow when not used for a long time?: I have a 10-year-old laptop with an I5 CPU and 4G memory. I haven't used it for two or three years. The day before yesterday, I turned it on. It took about 10 minutes from booting to running. After bo...; bigbat Embedded System

Tektronix 2260B-800-4 Programmable High Voltage Voltage Test Experience: Some time ago, I needed to test the charging of a lithium battery pack. The voltage of 18 lithium batteries in series can reach more than 70V. I used to have a GPC-6030D linear adjustable power supply...; littleshrimp Integrated technical exchanges

Shortcut: S0 S1 S2 S3 S4 S5 S6 S7 S8 S9 SA SB SC SD SE SF SG SH SI SJ SK SL SM SN SO SP SQ SR SS ST SU SV SW SX SY SZ T0 T1 T2 T3 T4 T5 T6 T7 T8 T9 TA TB TC TD TE TF TG TH TI TJ TK TL TM TN TO TP TQ TR TS TT TU TV TW TX TY TZ U0 U1 U2 U3 U4 U6 U7 U8 UA UB UC UD UE UF UG UH UI UJ UK UL UM UN UP UQ UR US UT UU UV UW UX UZ V0 V1 V2 V3 V4 V5 V6 V7 V8 V9 VA VB VC VD VE VF VG VH VI VJ VK VL VM VN VO VP VQ VR VS VT VU VV VW VX VY VZ W0 W1 W2 W3 W4 W5 W6 W7 W8 W9 WA WB WC WD WE WF WG WH WI WJ WK WL WM WN WO WP WR WS WT WU WV WW WY X0 X1 X2 X3 X4 X5 X7 X8 X9 XA XB XC XD XE XF XG XH XK XL XM XN XO XP XQ XR XS XT XU XV XW XX XY XZ Y0 Y1 Y2 Y4 Y5 Y6 Y9 YA YB YC YD YE YF YG YH YK YL YM YN YP YQ YR YS YT YX Z0 Z1 Z2 Z3 Z4 Z5 Z6 Z8 ZA ZB ZC ZD ZE ZF ZG ZH ZJ ZL ZM ZN ZP ZR ZS ZT ZU ZV ZW ZX ZY

Popular Components