EEWORLDEEWORLDEEWORLD

Part Number

Search

PH1-7LHSC4165

Description
Transponder, 10709Mbps(Tx), 10709Mbps(Rx), SC/UPC Connector,
CategoryWireless rf/communication    Optical fiber   
File Size240KB,6 Pages
ManufacturerJDS Uniphase Corporation ( VIAVI )
Websitehttp://www.jdsu.com/index.html
Download Datasheet Parametric View All

PH1-7LHSC4165 Overview

Transponder, 10709Mbps(Tx), 10709Mbps(Rx), SC/UPC Connector,

PH1-7LHSC4165 Parametric

Parameter NameAttribute value
MakerJDS Uniphase Corporation ( VIAVI )
Reach Compliance Codeunknown
Other featuresIT ALSO OPERATE FROM 1280NM TO 1600NM
body height13.2 mm
Body length or diameter84.1 mm
Connection TypeSC/UPC CONNECTOR
Data rate (receive)10709 Mbps
Data rate (send)10709 Mbps
Emitter/Detector TypeAVALANCHE PHOTODIODE
Fiber optic equipment typesTRANSCEIVER, TRANSPONDER
Nominal operating wavelength1560 nm
Nominal optical power output2.511 mW
minimum return loss-27 dB
Sensitivity-24 dBm
COMMUNICATIONS MODULES & SUBSYSTEMS
10 Gb/s TDM/DWDM 300 Pin SFF MSA SR2/IR2/LR2 Transponder
PH1 Series
Key Features
• Three configurations supporting SR2/IR2/LR2 applications
• Supports dense wavelength division multiplexing
(DWDM) applications (without wavelocker)
• Microprocessor controls to support I2C
• Integrated 16:1/1:16 mux/demux
• Small form factor package (2.2" x 3.0" x 0.53") for high
density applications
• Low power consumption: 4.8 W typical, 6.8 W maximum
for TDM applications
• 70 °C maximum operating temperature
• High sensitivity PIN or APD receivers
• SONET, FEC, Ethernet and Multirate Capable Versions
• Forward, counter and line timing clocking modes
Applications
Telecommunications
Metropolitan Area Networks
Subscriber loop
Intra-office SONET/SDH
High bit-rate data communications
JDSU 10 Gb/s PH1 Series transponders are intended for 1550 nm system
applications with reaches of up to 80 km. The series includes three different
transponders for SR2 (25 km), IR2 (40 km), and LR2 (80 km) TDM or DWDM
applications. Each transponder accepts 16 bits of parallel digital data and converts
it to a 10 Gb/s NRZ modulated optical signal. It also accepts a 10 Gb/s NRZ
modulated optical signal and converts it into 16 bit wide parallel digital data.
The PH1 series offers low DC power dissipation and is available in either a small
form factor package (2.2 x 3 x 0.53 inches) or in a larger footprint (3.5 x 4.5 x 0.53
inches) package, depending on system thermal performance requirements. The
transmit design uses an Electro-Absorptive Modulated Laser (EML) which,
depending on the configuration, produces an average output power of between
-4 dBm to 2 dBm (EOL). A PIN (-17 dBm typical sensitivity) or APD (-24 dBm
typical sensitivity) receiver is available, based on system configurations.
JDSU PH1 Series transponders are designed to support the following data rates:
9.953 Gb/s (SONET), 10.3125 Gb/s (Ethernet), 10.664 Gb/s (FEC Encoded),
10.709 Gb/s FEC, or 11.09 Gb/s EFEC. They meet all applicable SONET/SDH standards.
Compliance
• Telcordia GR-253-Core
NORTH AMERICA
:
800 498-JDSU (5378)
WORLDWIDE
:
+800 5378-JDSU
WEBSITE
:
www.jdsu.com
In the wince driver, dynamically modify the display resolution and color depth
WINCE 5.0 + Samsung S3C2450 platform uses 24-bit LCD, and S3C2450 LCD controller supports 16-bit, 24-bit, 32-bit, etc. Therefore, there are the following requirements: The upper application can set th...
doublesex Embedded System
STM32 is programmed with keil5, and the switch routine storage location cannot be compiled normally
[size=5]I downloaded the STM32F205 program from waveshare, copied the example to the desktop, and opened it with keil5. I found that the following three header files had exclamation marks , and when c...
byron1902 stm32/stm8
50 classic embarrassing sentences
[size=3]1. The important task of the post-80s generation is to create the post-08 generation. [/size] [size=3]2. Facts have proved that feelings can withstand the wind and rain, but cannot withstand d...
emily Talking
Newbie help, about the 2xx clock problem ~
The user's guide says thatAfter a PUC, MCLK and SMCLK are sourced from DCOCLK at ~1.1 MHz (seethe device-specific data sheet for parameters) and ACLK is sourced fromLFXT1CLK in LF mode with an interna...
zhxin999 Microcontroller MCU
The serial communication between the microcontroller and the computer fails, and the MAX232 becomes hot.
I have been debugging the hardware for my graduation project recently. I encountered the problem mentioned in the title. The connection method of MAX is the one in the textbook. I have checked it seve...
浪儿飘 Embedded System
About DSP28335 SPI transmission
#include "DSP2833x_Device.h" #include "DSP2833x_Examples.h" unsigned char table[]={0xC0, //"0"0xF9, //"1"0xA4, //"2"0xB0, //"3"0x99, //"4"0x92, //"5"0x82, //"6"0xF8, //"7"0x80, //"8"0x90, //"9"0x88, /...
Aguilera DSP and ARM Processors

EEWorld
subscription
account

EEWorld
service
account

Automotive
development
circle

Robot
development
community

Index Files: 541  2389  2290  1793  2219  11  49  47  37  45 
Datasheet   0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z
Room 1530, 15th Floor, Building B, No. 18 Zhongguancun Street, Haidian District, Beijing Telephone: (010) 82350740 Postal Code: 100190
Copyright © 2005-2026 EEWORLD.com.cn, Inc. All rights reserved 京ICP证060456号 京ICP备10001474号-1 电信业务审批[2006]字第258号函 京公网安备 11010802033920号