-
The trade war between China and the United States has become the focus. The United States has begun to play the ban card against Chinese technology companies. The ZTE incident shows that if the ban...[Details]
-
Recently, the US embargo on ZTE has attracted much attention. Let's take a look at the relevant content with the automotive electronics editor. On April 16, local time, the U.S. Department of Co...[Details]
-
STM32 uses FSMC to read and write CPLD programs. CPLD is hung on the address line and data line of STM32. CPLD is regarded as an off-chip RAM for reading and writing. On the board I made, CPLD is hun...[Details]
-
With the development of information technology, intelligence, informatization and networking have become the development trend of modern industrial control. Since the 1980s, the rapid development...[Details]
-
When STM32 uses JTMS (PA13) and JTCK (PA14) as normal I/O ports, add the following code before initialization (the order cannot be reversed): RCC_APB2PeriphClockCmd(RCC_APB2Periph_AFIO, ENABLE); G...[Details]
-
The circuit shown in the figure requires that the light is off when the machine is turned on. Press the button once, and the light D1 will turn on and automatically turn off after a delay of 10 secon...[Details]
-
As an important branch of the power electronics industry, the technological progress of photovoltaic inverters is highly dependent on the development of electronic components and control technology...[Details]
-
International Solar Photovoltaic Network News: On November 21, Australia's SMA Solar Technology Co., Ltd. signed a contract with the local government to provide photovoltaic inverters with an insta...[Details]
-
According to the design requirements, the maximum voltage gain ≥ 60dB is achieved within a wide signal bandwidth (0-10MHz), and the ability to continuously adjust the gain or preset the gain in 5dB...[Details]
-
#include MSP430x12x2.h #define TEM_ADC_CHL 0x0a void InitSys(void); void Read_ADC(unsigned int INCH_channel); void ADC_TO_TEM(void); unsigned int ADC_sample_val; unsigned int long temp1,temp2;...[Details]
-
Program for MSP430 controller LCD SED1335 //------------------------------------------------------------ //------------------------------------------------------------ #define WC_ADD XBYTE #defi...[Details]
-
MSP430 ADC10 single channel multiple conversions #include "msp430x22x4.h" #define uchar unsigned char #define uint unsigned int #define LCDen 0X80; //The upper three bits of P3 are used as cont...[Details]
-
MSP430 uses ADC10 to measure the voltage of the temperature diode inside the chip #include "msp430x22x4.h" //This program uses ADC10 to measure the voltage of the temperature diode inside the chip ...[Details]
-
MSP430 MCU controls stepper motor with display program #include "msp430x22x4.h" #define uchar unsigned char #define uint unsigned int #define comm 0 #define dat 1 #define sclk_1 P4OUT|=0x01 //sc...[Details]
-
Lithium battery has changed the global industrial layout. With the development of new energy vehicles in China, the development speed of China's lithium battery industry is also amazing. So, what a...[Details]