The Interconnect Solution Source
•
ROW
Connectors
Cable to
Board or Panel
2
WTA-WTA
Examples:
PLUG:
RECEPTACLE:
WTA 26
WTA 26
PC
JT
SAD9 JL
PLUG
WTA
= 2-row, straight-plug, w/o mounting ears
RECEPTACLE
SERIES
WTA
= 2-row, straight, receptacle, w/o mounting ears
NUMBER OF CONTACTS
10, 14, 20, 24, 26, 30, 36, 40, 44, 50, 54, 56, 60, 66, 70
10, 14, 20, 24, 26, 30, 36, 40, 44, 50, 54, 56, 60, 66, 70
TYPE OF CONTACTS
• Pin or socket contacts can be used in either plug or receptacle.
• When pin contacts are use, standard hardware orientation places the female hardware next to the #1 pin contact.
• When socket contacts are used, standard hardware orientation places the male hardware next to the #1 socket.
PC
PD5
PD7
PD9
PD11
PD13
PD15
PD20
PF3
PF6
PF8
PW34
PW40
Pin, straight, solder cup
Pin, straight, dip solder, .078
Pin, straight, dip solder, .109
Pin, straight, dip solder, .140
Pin, straight, dip solder, .172
Pin, straight, dip solder, .203
Pin, straight, dip solder, .234
Pin, straight, dip solder, .312
Pin, straight, flex-circuit, .050
Pin,straight, flex circuit, .093
Pin,straight, flex circuit, .125
Pin, straight, wire wrap, .513
Pin, straight, wire wrap. .625
SAC
SAD7
SAD9
SAD11
SAF3
SAF6
SAF9
SAP
SAW24
SAW40
Socket, straight, solder cup
Socket, straight, dip solder, .109
Socket, straight, dip solder, .140
Socket, straight, dip solder, .172
Socket, straight, flex-circuit, .050
Socket, straight, flex-circuit, .093
Socket, straight, flex-circuit, .140
Socket, straight, pin termination, .150, connector saver
Socket, straight, wire wrap, .375
Socket, straight, wire wrap, .625
TYPE OF HARDWARE
• Jackset hardware determines image of connector. Must specify image with Guide Set Hardware.
• Plug facial seal gaskets and hoods; order separately or add “Q” in part number. Example: WTA10PD9QJ. See “Gaskets” and
“Hoods” under next tab for instructions.
JT
= Turning jackset, .500
J
= Fixed jackset
JTA
= Turning Jackset, .200
JL
= Fixed jackset, long
JTB
= Hex turning jackset, .200
JTC
= Hex turning jackset, .500
OPTIONS
• OPTION CODES: Add to the end of the part number. Example: WTA10SAD9J-D01. Call factory for additional codes.
-443: Polarized Pin installed in contact position noted by dash number. See “Polarization” under next tab.
-444: Contact position noted by dash number is left open (to mate with -443). See “Polarization” under next tab.
-B82: Termination face sealed against conformal coating.
-D01: Pre-tin contact terminations. (Solder cup, wire wrap and flex circuit contacts are excluded.)
-D54: Combine B82 and D01 special codes.
-G69: Solder cups are fixed in an outward orientation, otherwise contacts can rotate.
“W” Series Connectors
W-10
Airborn, Inc. • 4321 Airborn Drive • Addison, TX 75001-0519
Ph: (972)931-3200 Fax: (972)931-9305 E-mail: info@airborn.com
0005
Linux and Android
京公网安备 11010802033920号
EEWORLD
