TMM-129-06-F-D-SM-10-A

Serial Port:   一. USART_ITConfig(USART1, USART_IT_TXE, ENABLE): As long as the transmit register is empty, there will always be an interrupt. Therefore, if you are not sending data, turn off the tran...[Details]

The photovoltaic inverter is the core equipment of the photovoltaic system. Its main function is to convert the direct current generated by the photovoltaic modules into alternating current that meets...[Details]

Unlike three years ago, today's artificial intelligence is no longer just a floating concept, and the venture capital circle has begun to explore the various possibilities of this technolog...[Details]

The adoption rate of serverless cloud computing is gradually increasing, but it has not yet reached people's expectations. Various surveys show that serverless is still an eme...[Details]

The pins of stm32 have two uses: GPIO (general purpose io) and AFIO (alternate function io) For some pins (depending on the chip), neither of these two uses exists. For example, in 64-pin products, O...[Details]

The clock system of STM32 can be directly summarized in a diagram (from the STM32F10X reference manual).  The following is an analysis of this diagram 1. STM32 input clock source 1.1 Function of cl...[Details]

When STM32 uses JTMS (PA13) and JTCK (PA14) as normal I/O ports, add the following code before initialization (the order cannot be reversed):   RCC_APB2PeriphClockCmd(RCC_APB2Periph_AFIO, ENABLE); G...[Details]

I have encountered many problems when tinkering with LD driver recently. I will record them one by one below. Otherwise, who will remember who in five hundred years? 1. Configuration issues of multi-...[Details]

/*----------------------------------------------------------------------                             TMOD (89H)                     T1 T0       GATE C/T` M1 M0 GATE C/T` M1 M0 -----------------------...[Details]

International Solar Photovoltaic Network News: On November 21, Australia's SMA Solar Technology Co., Ltd. signed a contract with the local government to provide photovoltaic inverters with an insta...[Details]

At the early morning of November 17th, Beijing time, at the Global Supercomputing Conference held in Denver, the United States, the "nonlinear earthquake simulation" application completed by the te...[Details]

    Each I/O port of the AVR microcontroller corresponds to three registers: DDRx, PORTx and PINx, where DDRx is the data direction, i.e. input or output; PORTx is the state of the internal pull-up r...[Details]

#include  MSP430x12x2.h   #define TEM_ADC_CHL 0x0a  void InitSys(void);  void Read_ADC(unsigned int INCH_channel);  void ADC_TO_TEM(void); unsigned int ADC_sample_val;  unsigned int long temp1,temp2;...[Details]

MSP430 uses ADC10 to measure the voltage of the temperature diode inside the chip #include "msp430x22x4.h"  //This program uses ADC10 to measure the voltage of the temperature diode inside the chip  ...[Details]

　　On the evening of January 24, vivo officially released the first vivo X20 Plus screen fingerprint version equipped with under-screen fingerprint unlocking technology in Beijing. Let's follow the mo...[Details]