5 x 7 mm, 3.0, 3.3 & 5.0 Volt, HCMOS or Clipped Sinewave,
Precision TCXO/TCVTCXO
Product Description
MtronPTI’s M611x Series TCXO’s and TCVCXO’s provide design engineers with low voltage, surface mount products
with extremely tight stability (to ±0.3 ppm) over temperature and time. Specially processed crystals enable the M611x to
achieve consistent long-term stability and minimal frequency shift after reflow. Our processing also enables us to achieve
excellent g-sensitivity (1.5 ppb/g). The low phase noise (-155 dBc/Hz at 100 kHz) makes the M611x ideal for those design
engineers working on all types of systems as the reference timing source.
Product Applications
The M611x Series is ideally suited for a wide range of applications such as GPS, military, avionics, test and measurement,
WLAN, WiMax base stations (see Fig 2.), point to point/multi-point radios, medical equipment, frequency synthesis, fre-
quency translation and land mobile radio. Standard output for the M611x series is HCMOS compatible or clipped sinewave
and draws as little as 1.5 mA with a 3.3 volt supply at 13 MHz. This low power consumption provides an advantage over
similarly specified ovenized oscillators for power-sensitive applications. The M611x series offers ±9.2 ppm minimum pull
range with excellent tuning linearity performance for critical PLL applications. This series is available in frequencies from 8
to 52 MHz, and is offered in a ceramic surface mount platform with industry standard 5 x 7 mm footprint.
Product Ordering Information
M6110Sxxx, M6111Sxxx & M6112Sxxx - Contact factory for datasheets.
MtronPTI reserves the right to make changes to the product(s) and service(s) described herein without notice. No liability is assumed as a result of their use or application.
Please see www.mtronpti.com for our complete offering and detailed datasheets. Contact MtronPTI for your application specific requirements at 800.762.8800 toll free or 605.665.9321.
M611x Series
Performance Characteristics
5 x 7 mm, 3.0, 3.3 & 5.0 Volt, HCMOS or Clipped Sinewave,
Precision TCXO/TCVTCXO
MtronPTI reserves the right to make changes to the product(s) and service(s) described herein without notice. No liability is assumed as a result of their use or application.
Please see www.mtronpti.com for our complete offering and detailed datasheets. Contact MtronPTI for your application specific requirements at 800.762.8800 toll free or 605.665.9321.
2
M611x Series
Phase Noise Plot
5 x 7 mm, 3.0, 3.3 & 5.0 Volt, HCMOS or Clipped Sinewave,
Precision TCXO/TCVTCXO
Output Waveform
MtronPTI reserves the right to make changes to the product(s) and service(s) described herein without notice. No liability is assumed as a result of their use or application.
Please see www.mtronpti.com for our complete offering and detailed datasheets. Contact MtronPTI for your application specific requirements at 800.762.8800 toll free or 605.665.9321.
3
M611x Series
Product Dimension & Pinout Information
5 x 7 mm, 3.0, 3.3 & 5.0 Volt, HCMOS or Clipped Sinewave,
Precision TCXO/TCVTCXO
Part Markings:
Line 1: Indicates part family,
year, month of production
Line 2: Indicates frequency
MtronPTI reserves the right to make changes to the product(s) and service(s) described herein without notice. No liability is assumed as a result of their use or application.
Please see www.mtronpti.com for our complete offering and detailed datasheets. Contact MtronPTI for your application specific requirements at 800.762.8800 toll free or 605.665.9321.
4
M611x Series
Handling Information
5 x 7 mm, 3.0, 3.3 & 5.0 Volt, HCMOS or Clipped Sinewave,
Precision TCXO/TCVTCXO
Although protection circuitry has been designed into the M611x oscillator, proper precautions should be taken to
avoid exposure to electrostatic discharge (ESD) during handling and mounting. MtronPTI utilizes a human-body
model (HBM) and a charged-device model (CDM) for ESD-susceptibility testing and protection design evaluation.
ESD voltage thresholds are dependent on the circuit parameters used to define the mode. Although no industry-
wide standard has been adopted for the CDM, a standard HBM (resistance = 1500
Ω,
capacitance = 100 pF) is
widely used and therefore can be used for comparison purposes. The HBM ESD threshold presented here was
obtained using these circuit parameters.
Quality Parameters
Part Marking Guide
Line 1: Indicates part family, year, month of production
Line 2: Indicates frequency
MtronPTI reserves the right to make changes to the product(s) and service(s) described herein without notice. No liability is assumed as a result of their use or application.
Please see www.mtronpti.com for our complete offering and detailed datasheets. Contact MtronPTI for your application specific requirements at 800.762.8800 toll free or 605.665.9321.
I saw on the Internet that ISR cannot have return values and parameters, but in the ISR of wince, the OEMInterruptHandle() function has both return values and parameters. This OEMInterruptHandle funct...
Sina Technology News, June 20, according to foreign media reports, IBM and Georgia Tech have successfully made a chip run at 500GHz, at a temperature of -268℃, which also refreshed the speed record of...
Well, I like roasted zongzi～～～～Did you eat zongzi today? As a zongzi lover, I bought two boxes of zongzi a month in advance and started eating them. (ω)╯Eat zongzi (ω)╯Eat zongzi...
How to become an IC design expert? How to improve your design ability? My feeling is that IC design is different from general board-level electronic design. Since the investment in tape-out is larger,...
In order to use the development board NUCLEO-F746ZG to establish a connection with the smart display module, I thought it was a very simple thing, but I took a lot of detours and spent some trouble.Fi...
The problem of dynamic sealing of equipment always exists with the operation of the equipment. Today, we have specially sorted out the various commonly used sealing forms, usage scope and character...[Details]
Blackfin® 16-/32-bit embedded processors offer high performance, low power consumption, flexible software features, and scalability, making them suitable for converged applications such as multi-fo...[Details]
The motor is a very important component for new energy vehicles. In terms of vehicle power, pure electric vehicles use electric motors instead of traditional diesel/gasoline engines. For electric v...[Details]
For new energy vehicles, battery swapping is a quick and convenient way to replenish the vehicle's power, alleviating range anxiety and charging anxiety. So, for plug-in hybrid vehicles, from a tec...[Details]
On July 31st, the "Veco Cup OFweek 2025 (10th) Industry Annual Selection and Awards Ceremony" concluded successfully in Shenzhen. Ecovacs won the "2025 Artificial Intelligence Industry Outstanding ...[Details]
With the global penetration rate of new energy vehicles projected to exceed 45% by 2025, and the industry's transformation entering its second half, the era of intelligentization, LiDAR has rapidly...[Details]
As urbanization accelerates and public safety demands continue to rise, traditional surveillance systems are gradually exposing their limitations due to their reliance on manual oversight, delayed ...[Details]
To achieve a wider range of colors, LED color mixing designs are shifting from single-minded current or voltage control methods to intelligent technologies like microcontrollers or field-programmab...[Details]
Power Integrations (PI) recently announced its second-quarter 2025 financial results, with performance in line with expectations, with revenue increasing 9% year-on-year to $116 million. The indust...[Details]
In recent years, with
the rapid development of
autonomous driving
technology, the industry
has placed higher demands on the accuracy, coverage, and scalability of
simulation
test plat...[Details]
As the global wave of green transformation sweeps across the globe, the transportation industry faces unprecedented challenges and opportunities. As a technology leader in industrial connectivity s...[Details]
The battery is the core component of the vehicle, which is related to the vehicle's safety and mileage. According to the battery life, the ternary lithium battery is about 1500 to 2000 times. So fo...[Details]
On July 29, 2025, the welding procedure qualification for the penstocks of the Yunfu Shuiyuanshan Pumped Storage Power Station was successfully completed at Panyu Zhujiang Steel Pipe (Zhuhai) Co., ...[Details]
Four-step solution
Step 1. In the oscilloscope interface, select File → Print to Window.
Step 2. In the drawing window interface, select Edit, and you will see the option to copy th...[Details]
Embedded System
京公网安备 11010802033920号
EEWORLD
