ZAFBP-2100+ is a 50Ω filter built into a rugged connectorized package (size: 2.00" x 2.00" x 0.75") case. Covering
the bandwidth of 2100 MHz ± 50 MHz, this bandpass filter offers good matching in the passband and high rejection
in the stopband. Power handing capacity is as high as 4.7W at 25°C.
Product Overview
Key Features
Feature
High rejection
Flat group delay characteristics
(0.6 ns typical)
High power (4.7W)
Good VSWR (1.4:1 typical in
passband)
Advantages
This enables the filter to attenuate sub harmonics and spurious signals.
This model has a group delay flatness of 0.6 ns which helps in minimizing the signal distortion.
Suitable for base station and long-haul applications and test labs.
This provides good matching when used other devices.
Notes
A.
Performance and quality attributes and conditions not expressly stated in this specification document are intended to be excluded and do not form a part of this specification document.
B.
Electrical specifications and performance data contained in this specification document are based on Mini-Circuit’s applicable established test performance criteria and measurement instructions.
C.
The parts covered by this specification document are subject to Mini-Circuits standard limited warranty and terms and conditions (collectively, “Standard Terms”); Purchasers of this part are entitled
to the rights and benefits contained therein. For a full statement of the Standard Terms and the exclusive rights and remedies thereunder, please visit Mini-Circuits’ website at www.minicircuits.com/MCLStore/terms.jsp
www.minicircuits.com
P.O. Box 35166, Brooklyn, NY 11235-0003 (718) 934-4500 sales@minicircuits.com
Page 1 of 3
Mini-Circuits
®
Bandpass Filter
50Ω 2050 to 2150 MHz
Features
• High rejection, 50 dB
• Flat group delay over passband, 0.6 ns typical
• Good VSWR, 1.4:1 typical in passband
• Connectorized package
Parameter
Pass Band
Stop Band, Lower
Stop Band, Upper
Center Frequency
Insertion Loss
VSWR
Insertion Loss
VSWR
Insertion Loss
VSWR
Coaxial
ZAFBP-2100+
CASE STYLE: CC1397
Connectors
Model
Price Qty.
SMA-FEMALE
ZAFBP-2100-S+ $69.95 ea. (1-9)
Electrical Specifications at 25°C
F#
—
F1-F2
F1-F2
DC-F3
DC-F3
F4-F5
F4-F5
Frequency (MHz)
—
2050-2150
2050-2150
DC-1800
DC-1800
2340-5000
2340-5000
Min.
—
—
—
20
—
20
—
Typ.
2100
5.0
1.4
29
29
48
12
Max.
—
6.0
1.7
—
—
—
—
Unit
MHz
dB
:1
dB
:1
dB
:1
Applications
• Harmonic rejection
• Transmitters / receivers
• Lab use
Maximum Ratings
Functional Schematic
RF IN
RF OUT
Operating Temperature
Storage Temperature
RF Power Input*
-55°C to 100°C
-55°C to 100°C
4.7W max. at 25°C
* Derate linearly to 2W at 100°C
ambient.
Permanent damage may occur if any of these limits are exceeded.
Typical Performance Data at 25°C
Frequency
(MHz)
5
200
1000
1500
1800
1920
1950
2050
2080
2100
2120
2150
2230
2300
2340
2360
2700
3500
4200
5000
Insertion Loss
(dB)
82.27
62.21
46.92
40.41
31.18
14.74
7.58
3.64
3.75
3.97
4.21
4.49
7.44
31.94
49.74
59.55
50.60
56.32
72.75
43.07
VSWR
(:1)
4585.90
175.67
102.53
79.81
36.11
8.88
3.03
1.40
1.26
1.30
1.30
1.11
1.35
6.51
12.22
15.06
42.87
42.86
44.81
33.90
Frequency
(MHz)
2050
2055
2060
2065
2070
2075
2080
2085
2090
2095
2100
2105
2110
2115
2120
2125
2130
2140
2145
2150
Group Delay
(nsec)
6.39
6.37
6.37
6.37
6.37
6.38
6.39
6.41
6.45
6.48
6.51
6.55
6.59
6.63
6.67
6.72
6.77
6.88
6.95
7.01
Typical Frequency Response
FREQUENCY (MHz)
DC
INSERTION LOSS (dB)
F3
F1
F2
F4
F5
0
ZAFBP-2100+
INSERTION LOSS (Full band)
3.5
4.0
4.5
5.0
2050
2075
2100
2125
2150
0
ZAFBP-2100+
INSERTION LOSS (Passband)
INSERTION LOSS (dB)
The +Suffix identifies RoHS Compliance. See our web site
for RoHS Compliance methodologies and qualifications
20
INSERTION LOSS (dB)
+RoHS Compliant
10
20
30
40
50
60
70
1000
1250
1500
1750 2000 2250 2500
FREQUENCY (MHz)
2750
3000
40
60
80
0
1000
2000
3000
FREQUENCY (MHz)
4000
5000
1000
ZAFBP-2100+
VSWR
7.1
ZAFBP-2100+
GROUP DELAY
GROUP DELAY (nSec)
6.9
100
VSWR
1.4
6.7
10
1.2
1
2050 2075 2100 2125 2150
6.5
1
0
1000
2000
3000
FREQUENCY (MHz)
4000
5000
6.3
2050
2070
2090
2110
FREQUENCY (MHz)
2130
2150
Notes
A.
Performance and quality attributes and conditions not expressly stated in this specification document are intended to be excluded and do not form a part of this specification document.
B.
Electrical specifications and performance data contained in this specification document are based on Mini-Circuit’s applicable established test performance criteria and measurement instructions.
C.
The parts covered by this specification document are subject to Mini-Circuits standard limited warranty and terms and conditions (collectively, “Standard Terms”); Purchasers of this part are entitled
to the rights and benefits contained therein. For a full statement of the Standard Terms and the exclusive rights and remedies thereunder, please visit Mini-Circuits’ website at www.minicircuits.com/MCLStore/terms.jsp
www.minicircuits.com
P.O. Box 35166, Brooklyn, NY 11235-0003 (718) 934-4500 sales@minicircuits.com
Mini-Circuits
®
REV. OR
M130728
ZAFBP-2100+
EDU1038_1
URJ
131022
Page 2 of 3
Bandpass Filter
ZAFBP-2100+
Coaxial Connections
INPUT
OUTPUT
1 (SMA female)
2 (SMA female)
Outline Drawing
Outline Dimensions (
inch
)
mm
A
2.00
50.80
G
.125
3.18
B
2.00
50.80
H
.38
9.65
C
.75
19.05
J
1.00
25.40
D
.938
23.83
E
.13
3.30
F
1.750
44.45
wt
grams
100.0
Notes
A.
Performance and quality attributes and conditions not expressly stated in this specification document are intended to be excluded and do not form a part of this specification document.
B.
Electrical specifications and performance data contained in this specification document are based on Mini-Circuit’s applicable established test performance criteria and measurement instructions.
C.
The parts covered by this specification document are subject to Mini-Circuits standard limited warranty and terms and conditions (collectively, “Standard Terms”); Purchasers of this part are entitled
to the rights and benefits contained therein. For a full statement of the Standard Terms and the exclusive rights and remedies thereunder, please visit Mini-Circuits’ website at www.minicircuits.com/MCLStore/terms.jsp
www.minicircuits.com
P.O. Box 35166, Brooklyn, NY 11235-0003 (718) 934-4500 sales@minicircuits.com
1. There was a penguin whose home was very far from the polar bear's home. If he walked, it would take him 20 years to get there. One day, the penguin was very bored staying at home, so he decided to ...
[i=s]This post was last edited by nos001 on 2016-9-11 16:03[/i] This edge capture is used to measure the cycle time of the AC waveform. It uses the CCP3 pin. The capture setting of PIC24F16KL402 is ve...
In the process of learning interrupts, the simplest program used is as follows. I use a development board and load it directly. Can I ask an expert why the program cannot enter the interrupt? Thank yo...
The oscilloscope probe given away by keysight during the Thanksgiving month is actually 850 RMB on Taobao. Click here to view Bingqi23's reward post as evidence; another netizen reportedly posted an o...
We operate I/O by writing registers. When the output is set to open drain, some tutorials say that the input can be set to pull-up or no pull-up. So the question is, if the input is set to pull-up, do...
1 Introduction
A wide variety of communication cables and control cables are widely used in various instruments and control equipment. Whether the cable is well-conducted and
whether
th...[Details]
Today, with the increasing integration of functions, mobile phones can also be used as portable media players (PMP), digital cameras, handheld computers (PDAs), and even global positioning systems ...[Details]
introduction
Throughout the history of automotive lighting, power has always played an important role. Initially, cars only needed headlights to see the road in the dark. Later, other light so...[Details]
In public places such as schools, government agencies, factories and mines, as well as public corridors in residential areas, the phenomenon of long-burning lights is very common, which causes a h...[Details]
We know that microcontroller development tools generally include real-time online emulators and programmers. Among them, online emulators are very good tools, but they are also more expensive...[Details]
MediaTek (2454) announced the acquisition of F-MStar (3697) and attracted the attention of IC design industry. This morning, Gartner Semiconductor Industry Research Director Hong Cenwei analyzed ...[Details]
General LED lighting has a current limiting resistor in the driving circuit, and the power consumed by the resistor has nothing to do with the LED light emission. In order to improve efficiency, a...[Details]
With the advocacy and implementation of the government's Safe City Plan, the security market has increasingly higher requirements for the clarity of surveillance images. Imagine that after a case o...[Details]
Nippon Electric Works and Volvo Technology Japan have developed a wireless power supply system for electric vehicles (EVs). Using this system, the two companies have successfully conducted an exper...[Details]
I've been studying dot matrix recently. It looks simple, but it takes a while to master it completely! The 8*8 dot matrix hardware circuit I'm making now is like this. The row is driven by 74HC138 + t...[Details]
Since the late 1990s, with the demand for higher system efficiency and lower power consumption, the technological update of telecommunications and data communication equipment has promoted the deve...[Details]
Introduction
As the country increases its efforts to control the atmospheric environment, motorcycle emission regulations will become stricter year by year, and motorcycles that do not meet the...[Details]
Introduction
X1226 has the functions of clock and calendar. The clock relies on hour, minute and second registers to track, and the calendar relies on date, week, month and year registers to tr...[Details]
0 Introduction
Wireless Sensor Network (WSN) monitors the target by deploying a large number of sensor nodes in the target area. WSN realizes the positioning and tracking of the target, determi...[Details]
In order to develop lighting LED technology, developed countries attach great importance to the research of LED testing methods and standards. For example, the National Institute of Standards and T...[Details]