Smooth, white, topcoated film for immediate destructibility on many surfaces; adhesive
permanently bonds to high and low surface energy plastics, textured and contoured
surfaces, powder coatings, and slightly oily metals; good UV resistance; UL/CSA recognized
Film fractures upon removal; good for security seals; high speed die cutting liner;
FDA compliant for indirect food contact
Press printable and writable; adheres well to most high and low surface energy substrates;
survives autoclaving while adhered to most surfaces; excellent resistance to flagging on
small diameter vials and containers
Film fractures upon removal; good for security seals; high speed die cutting liner; FDA
compliant for indirect food contact
Description
Adhesive Caliper Liner
Top Coat
Comments
FA102
White acetate
P1212
2.0
50# super
calendared Kraft
43# densified Kraft
No
7110
White paper
320
2.0
No
FA112
Clear acetate
P1212
2.0
50# super
calendared Kraft
No
Void
7381
White PET
300
2.3
55# densified Kraft
No
White "VOID" message when removed; compact image for small labels; adhesive bonds well
to a wide variety of high and low surface energy plastics, UL/CSA recognized
White "VOID" message when removed; general purpose adhesive bonds to a variety of
substrates including polyolefins; high speed die cutting liner and matrix stripping; topcoat
printable by a variety of film inks and thermal transfer ribbons; FDA compliant for indirect
food contact
Silver "VOID" message when removed; general purpose adhesive bonds to a variety of
substrates including polyolefins; high speed die cutting liner and matrix stripping; topcoat
printable by a variety of film inks and thermal transfer ribbons; FDA compliant for indirect
food contact
FMV22
White PET
P1410
2,0
50# super
calendared Kraft
Yes
FMV02
Silver PET
P1410
2.0
50# super
calendared Kraft
Yes
Triangle
FMV01402
White PET
P1410
2.0
50# super calendared
Kraft-Remoist
Yes
White triangle pattern when removed; general purpose adhesive bonds to a variety of
substrates including polyolefins; liner remoisturized to reduce curl; high speed die cutting
liner and matrix stripping; topcoat printable by a variety of film inks and thermal transfer
ribbons; FDA compliant for indirect food contact
Silver triangle pattern when removed; general purpose adhesive bonds to a variety of
substrates including polyolefins; liner remoisturized to reduce curl; high speed die cutting
liner and matrix stripping; topcoat printable by a variety of film inks and thermal transfer
ribbons; FDA compliant for indirect food contact
FMV01202
Silver PET
P1410
2.0
50# super calendared
Kraft-Remoist
Yes
Stop
76901
Purple
Polyethylene
Acrylic
1.0
65g/m
2
White
densified Glassine
Yes
Designed for high security; high density printable polyethylene film; permanent adhesive
fractures a "STOP" message onto the substrate when removed making it impossible to
replace the label undetected; bonds to many substrates
Designed for high security; high density printable polyethylene film; non-permanent
adhesive fractures a "STOP" message on the face of the label; leaves no adhesive residue
and makes it impossible to replace the label undetected; adhesive bonds to many substrates
76903
Purple
Polyethylene
Acrylic
1.0
65g/m
2
White
densified Glassine
Yes
Note: Technical information and data above should be considered representative only and should not be used for specification purposes.
3M
™
Tamper-Evident Label
76901 clearly warns to
STOP when removing the
label. The warning remains
obvious if attempts are
made to replace it.
3M
™
Tamper-Evident Label
FMV02 flashes a bright
“VOID” alert when peeled off.
8
9
3M
™
Tamper-Evident Label Materials
Color and Material Availability
Silver Polyester
10
“VOID” tamper evident
“Triangle” tamper evident
“Destructible” tamper evident
“STOP” tamper evident
Talk to a label expert
1-800-422-8116 • www.3M.com/converter
PRODUCT USE:
All statements, technical information and recommendations contained in this document are based upon tests or experience that 3M believes
are reliable. However, many factors beyond 3M’s control can affect the use and performance of a 3M product in a particular application, including the
conditions under which the product is used and the time and environmental conditions in which the product is expected to perform. Since these factors are
uniquely within the user’s knowledge and control, it is essential that the user evaluate the 3M product to determine whether it is fit for a particular purpose
and suitable for the user’s method of application.
WARRANTY AND LIMITED REMEDY:
Unless stated otherwise in 3M’s product literature, packaging inserts or product packaging for individual products,
3M warrants that each 3M product meets the applicable specifications at the time 3M ships the product. Individual products may have additional or different
warranties as stated on product literature, package inserts or product packages. 3M MAKES NO OTHER WARRANTIES, EXPRESS OR IMPLIED, INCLUDING,
BUT NOT LIMITED TO, ANY IMPLIED WARRANTY OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE OR ANY IMPLIED WARRANTY
ARISING OUT OF A COURSE OF DEALING, CUSTOM OR USAGE OF TRADE. User is responsible for determining whether the 3M product is fit for a particular
purpose and suitable for user’s application. If the 3M product is defective within the warranty period, your exclusive remedy and 3M’s and seller’s sole
obligation will be, at 3M’s option, to replace the product or refund the purchase price.
LIMITATION OF LIABILITY:
Except where prohibited by law, 3M and seller will not be liable for any loss or damage arising from the 3M product, whether
direct, indirect, special, incidental or consequential, regardless of the legal theory asserted, including warranty, contract, negligence or strict liability.
After the temperature sensor signal is amplified by OP07, it is sent to the microcontroller port through the 4 op amps of LM324 and the 4052 switch. Why are the output and input ports of the X and Y t...
I am using Wildfire 103. I have tried every baud rate of the debugging assistant and it still produces garbled characters. I don't know why. Please provide a solution....
The chip used on my board is TMS320F28335
IO voltage: 3.35V
The core voltage is 1.81V.
First of all, the circuit welding is fine, the voltage supply is also fine, and then the program is also fine.But...
Embedded System
京公网安备 11010802033920号
EEWORLD
