●All specifications in this catalog and production status of products are subject to change without notice. Prior to the purchase, please contact NEC TOKIN for updated product data.
●Please request for a specification sheet for detailed product data prior to the purchase.
●Before using the product in this catalog, please read "Precautions" and other safety precautions listed in the printed version catalog.
9634ESDVOL09E1003E1
Contents
Introduction of EMI Core
½½½½½½½½½½½½½½½½½½½½½½½½½½½½½½½½½4
Tips on EMI Core Usages
½½½½½½½½½½½½½½½½½½½½½½½½½½½½½½½5
New Product
Toroidal Cores for Round Cables with High Heat Resistance
and Cable Holding Mechanism ESD-R-H Series
½½½½½½½½½½½½6
Snap-on Cores for Round Cables with High Heat Resistance
and Cable Holding Mechanism ESD-SR-H Series
½½½½½½½½½½½7
Ring Type
Toroidal Cores (Bare Type)
½½½½½½½½½½½½½½½½½½½½½½½½½½½½½½8
Toroidal Cores (Coated Type)
½½½½½½½½½½½½½½½½½½½½½½½½½½½12
Toroidal Cores with Case
½½½½½½½½½½½½½½½½½½½½½½½½½½½½½½½14
Toroidal Cores with Snail-shaped Case½½½½½½½½½½½½½½½½½½½16
Snap-on Type
Snap-on Cores for Round Cables
½½½½½½½½½½½½½½½½½½½½½½½½½½½18
Flat Type
Solid / Split Cores for Flat Cables
½½½½½½½½½½½½½½½½½½½½½½½½20
Bead Type
Bead Cores
½½½½½½½½½½½½½½½½½½½½½½½½½½½½½½½½½½½½½½½½½½½28
●All specifications in this catalog and production status of products are subject to change without notice. Prior to the purchase, please contact NEC TOKIN for updated product data.
●Please request for a specification sheet for detailed product data prior to the purchase.
●Before using the product in this catalog, please read "Precautions" and other safety precautions listed in the printed version catalog.
9634ESDVOL09E1003E1
EMI Core
Vol.09
●All specifications in this catalog and production status of products are subject to change without notice. Prior to the purchase, please contact NEC TOKIN for updated product data.
●Please request for a specification sheet for detailed product data prior to the purchase.
●Before using the product in this catalog, please read "Precautions" and other safety precautions listed in the printed version catalog.
9634ESDVOL09E1003E1
EMI Cores
Ring Type
Introduction of EMI Core
Material Outer Diameter Inner Diameter
（㎜）
（㎜）
Mn-Zn
& Ni-Zn
Mn-Zn
& Ni-Zn
Mn-Zn
& Ni-Zn
Mn-Zn
& Ni-Zn
Mn-Zn
Height
（㎜）
Series Name
Shape
Model
Page
for Round Cables
Bare type
Toroidal Cores
(Bare Type)
Toroidal Cores
(Coated Type)
Toroidal Cores
with Case
Toroidal Cores
with Snail-shaped Case
Toroidal Cores
(ESD-R-H series)
ESD-R
9.5∼38.1
5.0∼19.0
3.0∼28.5
8
Coated type
ESD-R
12.0∼32.0
6.2∼19.0
3.0∼28.8
12
with Case
ESD-R
12.9∼61.0
6.0∼32.4
6.4∼24.0
14
Solid
with Snail-shaped Case
with High Heat Resistance and
Cable Holding Mechanism
ESD-R-B
21.5∼51.5
8.8∼25.5 13.0∼17.5
16
ESD-R-H
52.5
22.7
8.5
6
for Flat Cables
Bare type
Solid Core
for Flat Cables
ESD-FPL
Ni-Zn
14.5∼80.0
0.55∼2.2
2.75∼12.0
20
for Round Cables
with Case
with High Heat Resistance and
Cable Holding Mechanism
Snap-on Core
for Round Cables
(ESD-SR series)
Snap-on Core
for Round Cables
(ESD-SR-H series)
ESD-SR
Ni-Zn
−
φ6∼φ14.5
−
18
ESD-SR-H
Ni-Zn
−
φ9∼φ13
−
7
Split
for Flat Cables
with Metal Clamp
Split Core
for Flat Cables
Split Core
for Flat Cables
ESD-FPD
Ni-Zn
37.0∼80.0
2.0∼2.6
10
21
with Plastic
ESD-FPD-1
Ni-Zn
37.0∼80.0
2.0∼2.6
10
21
Beads
Single Piece Core
Beads Core
B-20
Mn-Zn
& Ni-Zn
2.8∼9.7
0.8∼4.8
1.2∼8.0
28
Case by case product guide
●When
you have worry about damages to cable covering and insulation.
Coated Type Core, Core with Case ...................................................
page 12∼15
●When
you want to retrofit the core
Hinged-Clamp Core
・For Round Cable: ESD-SR, ESD-SR-H series ..............................
・For Flat Cable: ESD-FPD series ......................................................
page 18∼19
page 21
●When
you want to fix the core
Core with Snail Shaped Case
・For Round Cable: ESD-R-B, ESD-R-H series ................................
・For Flat Cable: ESD-FPD-1 series ..................................................
page 16∼17
page 21
EMI Core
4
●All specifications in this catalog and production status of products are subject to change without notice. Prior to the purchase, please contact NEC TOKIN for updated product data.
●Please request for a specification sheet for detailed product data prior to the purchase.
●Before using the product in this catalog, please read "Precautions" and other safety precautions listed in the printed version catalog.
9634ESDVOL09E1003E1
EMI Cores
Ring Type
Tips on EMI Core Usages
■Characteristics and how to count turns
Number of turns are counted by how many times the lead wire passes through the inner
hole of the core. Do not count the number of lead wire winding outside the core, as it results
in different turn count. (Fig. 1)
When desired performance can not be obtained just by 1 turn, impedance characteristics
value can be raised by increasing the turn. In this case, the effective frequency band should
be checked that it is in the desired range as adding turns results in lowering down the
effective band range. (Fig. 2)
（Representative Example：ESD-R-16C）
10000
Resonance point changes to lower band
Impedance increase
1000
Impedance ( )
3T
2T
1T
100
1Ｔ
2Ｔ
3Ｔ
10
*Number of lead wire wound outside the core + 1
= Number of read wire passes through the inner
hole of the core
= Turn count
1
1
10
100
1000
Frequency (MHz)
Fig.2 Relationship between impedance and turn counts
Fig.1 How to count turns
■Effective band range depending on core material
There are two materials of ferrite, Ni-Zn series and Mn-Zn series. Ni-Zn series is effective
for MHz band range such as FM band while Mn-Zn series is effective for kHz band range.
Note that above effective band range is a reference only. Examination of effectiveness
with actual instrument is necessary.
As Mn-Zn series has lower resistance compared to Ni-Zn series, make sure to provide
adequate insulation before use.
Mn-Zn series vs Ni-Zn series ½ ½ Characteristics (representative example)
Z -f
(measurement condition: measured with same-dimension ring core)
1000
AM band range
100
FM band range
Ni-Zn series core
Impedance ( )
Mn-Zn series core
10
1
0.01
0.1
1
10
100
1000
Frequency (MHz)
Fig.3 Effective Band Range of Mn-Zn series / Ni-Zn series ferrite
EMI Core
5
●All specifications in this catalog and production status of products are subject to change without notice. Prior to the purchase, please contact NEC TOKIN for updated product data.
●Please request for a specification sheet for detailed product data prior to the purchase.
●Before using the product in this catalog, please read "Precautions" and other safety precautions listed in the printed version catalog.
I have been doing basic experiments on 51 these days, using a 110-speed 51 board. After memorizing the instruction system, I started writing programs, starting with the running light, interrupts and t...
The new USB flash drive I just bought has a problem. When I load something with 1G memory, I can see that 1G space has been occupied when I open the properties. But when I open the content, it pops up...
As digital multimedia applications become more and more widespread, video decoding has become a basic element in embedded system design. There are many video standards, and the product can implement o...
The Internet of Things (IoT) has become an integral part of our daily lives. It is hard to imagine life without being able to turn on the water heater from your phone when you are almost home. To achi...
The previous post briefly introduced the basic principles and initial experience of measuring PCB current with I prober 520. This post mainly tests the probe accuracy, limit bandwidth and measurement ...
The global PV inverter market will shrink from $6.3 billion in 2017 to $3.7 billion in 2022 due to falling prices, according to GlobalData.
Global PV Inverter Market Value to Shrink to $3.7 Bil...[Details]
Designing for automotive LCD displays larger than 5" can be complex. The display source driver requires a supply rail called analog voltage device drain (AVDD) in the 10V to 15V range and two supply ...[Details]
In order to strengthen the management of new energy vehicle charging facilities in our city, prevent and reduce accidents, protect the lives and property of the people, and improve the public safet...[Details]
On April 20, the Photovoltaic Summit, guided by Jiangsu Renewable Energy Industry Association, hosted by Growatt, and supported by LONGi Solar Technology Co., Ltd. and Jiangsu Bigo New Energy Group...[Details]
I recently upgraded MDK to V5.25 and found that there are many libraries in the Managing Run-Time Environment. Compared with the past, it is much better, from the bottom-level driver to the upper-le...[Details]
1. Usage scenarios In the first case, when using a common STM32 delay function, similar to HAL_Delay(time), since this function uses a loop to judge and delay, when executing this function, the ent...[Details]
The day before yesterday, I learned about STM's Systick and found it quite useful for precise timing. When I used CVAVR before, I found that the delay.h in it was very useful. So, I used STM32's...[Details]
The trade war between China and the United States has become the focus. The United States has begun to play the ban card against Chinese technology companies. The ZTE incident shows that if the ban...[Details]
Friends who work in the photovoltaic industry, do you still remember the hard work on June 30 last year? How many people worked late into the night for months in a row just to connect to the grid a...[Details]
Because the STM32 HAL library only has millisecond-level delay for HAl_Delay(), in order to achieve accurate microsecond-level delay, Systick has to be modified. However, since it is used internally ...[Details]
From last year to now, competition in the photovoltaic inverter industry has become increasingly fierce. In addition to the introduction of new products, various marketing and promotion methods hav...[Details]
At the just concluded InfoComm 2018 exhibition, the two major brands, Zhongke Jiguang and China Hualu, both displayed three-color light source
laser TVs
. The outstanding color performance ...[Details]
STM32 uses FSMC to read and write CPLD programs. CPLD is hung on the address line and data line of STM32. CPLD is regarded as an off-chip RAM for reading and writing. On the board I made, CPLD is hun...[Details]
51mcu
京公网安备 11010802033920号
EEWORLD
