●All specifications in this catalog and production status of products are subject to change without notice. Prior to the purchase, please contact NEC TOKIN for updated product data.
●Please request for a specification sheet for detailed product data prior to the purchase.
●Before using the product in this catalog, please read "Precautions" and other safety precautions listed in the printed version catalog.
2010.11.8 9565SCAVOL12E
FOR CORRECT USE OF SUPER CAPACITORS
1. Please confirm the operating conditions and the specifications of the
Super Capacitors befor using them.
2. The electrolyte of these Super Capacitors is sealed with material such as rubber.
When you use the capacitors for a long time at high temperature, the moisture of
the eleotrolyte evaporates and the equivalent series resistance (E.S.R.) increases.
The fundamental failure mode is the open mode depending on E.S.R. increase.
When using a capacitor, please introduce a safe design assuming unex-
pected capacitor failure, such as redundancy in design and protection from
fire and erroneous operation.
3. Please read 'Notes on Using the Super Capacitor' on page 60 when you design
the circuits using the Super Capacitors.
●All specifications in this catalog and production status of products are subject to change without notice. Prior to the purchase, please contact NEC TOKIN for updated product data.
●Please request for a specification sheet for detailed product data prior to the purchase.
●Before using the product in this catalog, please read "Precautions" and other safety precautions listed in the printed version catalog.
2010.11.8 9565SCAVOL12E
CONTENTS
page
1. Organization of Super Capacitor Series
……………………………………………………………
2. Performance for Selection
……………………………………………………………………………
…………………………………………………………………
4
5
5
6
7
9
9
3. Characteristics of Super Capacitor
4. Typical Applications
5. Part Number System
6. Rated Specifications
……………………………………………………………………………………
……………………………………………………………………………………
……………………………………………………………………………………
6.1 FC Series（SMD Type）
…………………………………………………………………………
6.2 FM Series
6.3 FG Series
6.4 FT Series
6.5 FY Series
6.6 FR Series
6.7 FS Series
…………………………………………………………………………………………
13
…………………………………………………………………………………………
20
…………………………………………………………………………………………
22
…………………………………………………………………………………………
24
…………………………………………………………………………………………
26
…………………………………………………………………………………………
28
6.8 FA，FE Series
……………………………………………………………………………………
30
6.9 HV Series（High Capacitance Type）
…………………………………………………………
32
7. Packing
……………………………………………………………………………………………………
33
………………………………………………………………
34
8. List of Plating Type and Sleeve Type
9. Measurement Conditions
………………………………………………………………………………
35
10. Notes on Using Super Capacitor
（Electric
Double-Layer Capacitor）
………………………
36
●All specifications in this catalog and production status of products are subject to change without notice. Prior to the purchase, please contact NEC TOKIN for updated product data.
●Please request for a specification sheet for detailed product data prior to the purchase.
●Before using the product in this catalog, please read "Precautions" and other safety precautions listed in the printed version catalog.
2010.11.8 9565SCAVOL12E
1. Organization of Super Capacitor Series
−25
to 70℃
guaranteed
mA order
back-up
μA
order
back-up
−40
to 85℃
guaranteed
For automatic
mounting
（SMD）
（embossad
taping）
series
3.5 to 5.5V
FC
For automatic
mounting
（radial
taping）
FME
FML
Type
5.5V
series
3.5 to 6.5V
FM
Type
3.5 to 5.5V
FMR
−40
to 85℃
guaranteed
Can Case type
（self-supporting
Type）
series
5.5V
FT
series
3.5 to 5.5V
FG
FGR
Type
5.5V
series
5.5 to 11V
FS
series
3.5 to 5.5V
FY
series
5.5V
FR
series
5.5V
FE
series
5.5 to 11V
FA
For A order
current
series
2.7V
10 to 100F
HV
4 Super Capacitors Vol.12
●All specifications in this catalog and production status of products are subject to change without notice. Prior to the purchase, please contact NEC TOKIN for updated product data.
●Please request for a specification sheet for detailed product data prior to the purchase.
●Before using the product in this catalog, please read "Precautions" and other safety precautions listed in the printed version catalog.
2010.11.8 9565SCAVOL12E
2. Performance for Selection
Low ESR
kA
Backup current depends on SuperCapacitor
equivalent series resistance (ESR)
Backup current
A
High power
SuperCapacitor
BOX type
High power
SuperCapacitor
HV Series
Low impedance application use
FA, FE, FS, FT, FM Series
mA
High ESR
μ
A
0.01
0.1
1
10
10
2
High impedance application use
FG, FY, FC, FM, FR Series
10
3
1 hour
10
4
10
5
10
6
1 minute
1 day 1 week
10
8
Backup time
1 month
( sec )
10
7
Backup time depends on capacitance
3. Characteristics of Super Capacitor
Super Capacitor can not be used for applications in AC circuit such as ripple absorption because it has high internal resistance
(several hundred mΩ to a hundred
Ω)
compared to aluminum electrolysis capacitor. Thus its main use would be similar to that
of secondary battery such as power back-up in DC circuit. The following list shows the characteristics of Super Capacitors as
compared to aluminum electrolyses capacitors for power back-up and secondary batteries.
Secondary battery
NiCd battery
Back-up ability
Eco-hazard
Operating temperature range
Charge time
Charge/discharge life time
Restrictions on charge/discharge
Flow soldering
Automatic mounting
Safety risks
◎
Cd
−20
to 60
℃
few hours
approx. 500 times
yes
not applicable
not applicable
leakage, explosion
Lithium ion battery
◎
− −
−
−20
to 50
℃
few hours
approx. 500 to 1000 times
yes
not applicable
not applicable
leakage, combustion, explosion, ignition
Capacitor
Aluminum electrolysis capacito
△
− −
−
−55
to 105
℃
few minutes
limitless (*1)
none
applicable
applicable
heat-up, explosion
Super Capacitor
○
− −
−
−40
to 85
℃（FR，FT）
few minutes
limitless (*1)
none
applicable
applicable (FM and FC series)
gas emission (*2)
(*1) Aluminum electrolysis capacitor and Super Capacitor has limited lifetime. However, when used under proper conditions, both can operate
sufficiently within the designed lifetime of the set they are built in.
(*2) There is no harm as it is a mere leak of water vapor which transitioned from water contained in the electrolyte (diluted sulfuric acid).
However, application of abnormal voltage surge exceeding maximum operating voltage may result in leakage and explosion.
Super Capacitors Vol.12 5
●All specifications in this catalog and production status of products are subject to change without notice. Prior to the purchase, please contact NEC TOKIN for updated product data.
●Please request for a specification sheet for detailed product data prior to the purchase.
●Before using the product in this catalog, please read "Precautions" and other safety precautions listed in the printed version catalog.
Engaged in ALTERA FPGA design for more than 6 years, led the design of 3 inkjet printing devices (including equipment working protocol, FPGA main modules, host computer VC++, C# test software), can in...
I have 108MHZ clock and data. How can I connect the EP3C25Q240C8N chip?I am ready to connect the clock to the global clock, but I don't know where to connect the data? Ordinary IO?
Note: One bit of da...
[i=s]This post was last edited by Beifang on 2017-9-14 15:47[/i] (1) Title of the work: Somatosensory gloves (2) Introduction to the functions of the work: The function of the somatosensory gloves is ...
Since we had a National Day holiday last week, the PCB boards and component packages were mailed this week! The PCB boards arrived first yesterday!So I couldn't wait to solder the chips I applied for ...
Anyone who has learned C language knows that they should write the main function first. However, many times we see different main functions. Why is this? Which one is correct? Today we will talk about...
In
circuit design,
current
measurement
is widely used, and the main fields are divided into three categories: in measurement,
the electric meter
is used to measure the curre...[Details]
Introduction
Power subsystems are becoming more and more integrated into the overall system. Power systems have moved from being separate "essential dangerous devices" to being monitorable...[Details]
1 Introduction
As an emerging microfabrication technology, micro-electromechanical system (MEMS) technology has begun to be applied in various fields. It can integrate functions such as inform...[Details]
On the afternoon of July 10, Beijing time, Taiwan's largest chip designer MediaTek expects its smartphone chip shipments to grow by double digits in the third quarter of this year, and the company is ...[Details]
Flooded Batteries
This battery developed in Germany can be used to power flashlights, strobe lights and toys as long as it is filled with water. This battery can be stored for 50 years and can...[Details]
Introduction
Liquid crystal, as a display device, is widely used in low-power products such as instruments, meters, and electronic equipment with its unique advantages. In the past, the displ...[Details]
1. Disadvantages of choosing too high a voltage level
Choosing too high a voltage level will result in too high an investment and a long payback period. As the voltage level increases, the...[Details]
This article will introduce a design method for a distributed control system used in a tracking car, which can perform distributed control of motor modules, sensor modules, and lighting control mod...[Details]
1 Introduction
With the rapid economic development, my country's electricity demand has been growing at a rate of more than 20% per year. According to the current economic development trend an...[Details]
Energy conservation and environmental protection are the main directions of current automotive technology research, and power batteries are the key to electric vehicle technology. Research on powe...[Details]
1 Introduction to the overall system solution
The hardware part is mainly used to amplify the sound. When the sound is loud enough, the signal can be introduced into the microcontroller for de...[Details]
Introduction
Temperature and humidity control are widely used in people's production and life. People use thermometers and hygrometers to collect temperature and humidity, and control temperatu...[Details]
Some people believe that hybrid vehicles are just a transitional product, and the ultimate goal of developing new energy vehicles is electric vehicles. Therefore, China should skip hybrid vehicles ...[Details]
1. Driver IC Product Range
IR provides users with a variety of driver integrated circuits from single-phase to three-phase bridge. All types use highly integrated level conversion technol...[Details]
Since the early 1950s, when ultrasound detection began to be used in the medical field, ultrasound diagnostic technology has made great progress. Ultrasonic diagnostic instruments are of various fo...[Details]
Recruitment
京公网安备 11010802033920号
EEWORLD
