: .......................................................................16 detents with 2.5 Ncm (+/- 30%) or no detents
Outer shaft
1
:......................................................................32, 16 or no detents
For 32 detents: 0.5, 1.0 or 2.0 Ncm (+/- 30%)
For 16 detents: 1.5 or 2.5 Ncm (+/- 30%)
Rotational life:
2
..................................................................1,000,000 revolutions min. with 0.5, 1.0 or 1.5 Ncm switching torque or with no detents
500,000 revolutions min. with 2.0 Ncm switching torque
300,000 revolutions min. with 2.5 Ncm switching torque
Residual switching torque (end of life): ................................90% typ.
Shaft strength: ...................................................................100 N min. push, 100 N min. pull, 50 Ncm min. bending
Fastening torque of nut: .....................................................100 Ncm max.
Shock: ...............................................................................100 G max. (MIL-STD-202G, method 213B, condition C)
Flammability:.....................................................................UL94-V0 (IP65/IP68: O-rings and non-threaded bushing gasket are UL94-HB)
Packaging Sizes
Tray: .................................................................................20 pcs. (nuts are supplied and packed separately)
Additional Data for Push Button Switch
Mechanical Data
Push button actuation force (new condition): ........................6 N (+/- 30%)
Push button switch travel: ...................................................0.5 (+/- 0.2) mm
Push button switch life:
2
......................................................200,000 actuations min.
Residual push button actuation force (end of life): ................90% typ.
Electrical Data
Contact bouncing time: ......................................................2 ms max.
Dielectric withstanding voltage to housing/shaft:..................500 VDC during 60 seconds (MIL-STD-202G, method 301)
[align=left]I recently bought a 4412 development board, equipped with a 7-inch screen, WIFI module, and GPS module. Here are some photos to introduce it. The photo taken by the mobile phone is a bit b...
[i=s]This post was last edited by huaiqiao on 2016-5-23 19:03[/i] [size=3]1. First of all, I replied to a post two days ago about how to add a logo to a PCB. (See the reply on the 4th floor for detail...
I successfully built the SDK in PB5 and installed it, but when I clicked SET ACTIVE PLATFORM in EVC4 to associate the SDK, I couldn't find the SDK. How can I solve this problem? I have reinstalled EVC...
I just learned to draw PCB, can you give me some advice, thank youThe board size is a bit big, this is what they asked, I can't do anything about it...4YTI8ZVM[@BA)YE$L@3MAF7.jpg(165.14 KB)Downloads:7...
Now I use F449 to make a handheld data acquisition instrument, and use a 320x240 (16RGB) LCD screen with a bus interface as a display. A preliminary idea is to use the Px port to simulate the bus beha...
Regardless of the price factor, the one-piece molded inductor can make the capacity and peak current very large while being very small. Can it replace the ordinary power inductor in applications such ...
EtherCAT (Ethernet for Control Automation Technology) is a real-time industrial fieldbus communication protocol based on an Ethernet-based development framework. EtherCAT is one of the fastest indu...[Details]
Nios II is a configurable 16-/32-bit RISC processor. Combined with a rich set of peripheral-specific instructions and hardware acceleration units, it provides a highly flexible and powerful SOPC sy...[Details]
ISP devices, such as field programmable devices (FPGAs and CPLDs), do not require a programmer. Using programming kits provided by the device manufacturer, they employ a top-down modular design app...[Details]
Ever since the Tesla fire incident, electric cars, already known for their poor reputation, have been subjected to even more scathing criticism. Despite this, many people are still willing to buy t...[Details]
We are entering a new era where people are increasingly affordably equipped with more electronic gadgets. Electronics have become essential to our lives. For example, the average consumer now owns ...[Details]
A tubular motor is an electric motor that is typically used to control the movement of machines and equipment. Tubular motors are generally divided into two categories: linear tubular motors and ro...[Details]
A pure sine wave inverter has a good output waveform with very low distortion, and its output waveform is essentially the same as the AC waveform of the mains power grid. In fact, the AC power prov...[Details]
A scale, a large, ground-mounted scale, is typically used to measure the tonnage of truck cargo. It's the primary weighing device used in factories, mines, and businesses for bulk cargo measurement...[Details]
introduction
As core electronic components used in vastly different fields, automotive-grade chips and mobile/consumer-grade chips exhibit significant differences in their...[Details]
introduction
The OMAP-L138 dual-core processor is a new generation of low-power single-chip systems (SoCs) from TI. It is widely used in communications, industrial, medical diagnostic, and aud...[Details]
0 Introduction
Portable terminals integrate a computer and display screen into a single device. Due to limited space in portable devices, previous designs often used a single-chip microcompute...[Details]
In microwave amplification circuits, the power chip is the core of the entire circuit. A large number of semiconductor devices in the chip will generate a lot of heat when working. If the heat diss...[Details]
In recent years, with the development of MOSFETs, they have gradually replaced transistors in the low-power, fast-switching industry. Major manufacturers in this field have also been reducing their...[Details]
Electronic devices are small individual components in electronic circuits. Transistors are common electronic components. Because of their wide range of applications, according to the usage of the e...[Details]
Recently, I received a request to use OK1028A-C to output PWM square wave. However, I found that there was no relevant instructions on the OK1028 platform, so I started writing this article.
A...[Details]
Linux and Android
京公网安备 11010802033920号
EEWORLD
