EEWORLDEEWORLDEEWORLD

Part Number

Search

10091960-400LF

Description
MALE, STRAIGHT TWO PART BOARD CONNECTOR, PRESS FIT
Categorysemiconductor    Other integrated circuit (IC)   
File Size297KB,18 Pages
ManufacturerFCI connector
Download Datasheet Compare View All

10091960-400LF Overview

MALE, STRAIGHT TWO PART BOARD CONNECTOR, PRESS FIT

Electronics Division
FCI USA LLC
Report EL-2011-04-020A CR-PE
Intermateability Testing, ATCS and FCI XCede® Connectors
(XCede® is a registered trademark of the Amphenol Corp.)
01 May 2011
PURPOSE
ATCS and FCI XCede® connectors were subjected to intermateability testing. Tested product included ATCS gold plated receptacles
and headers, FCI GXT™ plated receptacles and headers, and FCI gold plated headers.
CONCLUSIONS
The tested samples met the specified requirements.
SAMPLE DESCRIPTION
The test samples were composed of 4-pair connector modules. Each connector module was constructed of six (6) wafers, each wafer
having 4 pairs of signal contacts. The header modules were in a vertical configuration; the receptacle modules were in a right angle
configuration. The contact surfaces of the header terminals were lubricated. The details of the submitted test samples are given in the
following table.
SUBMITTED SAMPLE DESCRIPTION
Item
Description
Part #
Plating Type (µm)
1
FCI XCede® Receptacle Module
10091799-101LF
GXT™ (0.76) / Ni (2.54)
1
2
FCI XCede® Receptacle Monoblock
10091960-400LF
GXT™ (0.76) / Ni (2.54)
3
FCI XCede® Header Module
10091767-00C-20DLF GXT™ (0.76) / Ni (2.54)
4
FCI XCede® Header Module
10091767-00C-20DLF
Au (0.76) / Ni (2.54)
5
ATCS XCede® Receptacle Module
950-400A-B1D
Au (0.76) / Ni (1.27)
1
6
ATCS XCede® Receptacle Monoblock
AX400-00566
Au (0.76) / Ni (1.27)
7
ATCS XCede® Header Module
951400C20D
Au (0.76) / Ni (1.27)
8
ATCS XCede® Test Board
PCB444 Rev E
Immersion Sn
1
Each receptacle monoblock consisted of 3 receptacle modules with a common organizer.
Each backplane test board held three (3) header modules; each daughter card test board held a single 3-module monoblock receptacle
assembly. The test boards provided circuitry for low level contact resistance (LLCR) measurement of 120 positions per sample
comprising 60 signal contacts, 51 wide ground contacts, and 9 narrow (end) ground contacts. Dielectric testing was conducted on
single unmounted modules
The connectors were tested in all inter-mated combinations of ATCS and FCI receptacles with ATCS, FCI GXT™ plated, and FCI
gold plated headers. The resulting sample sets are listed in the following table.
EL-2011-04-020A CR-PE
1. This Engineering Test Report shall not be reproduced except in full unless written permission is received from the V.P. Engineering.
Page 1 of 18

10091960-400LF Related Products

10091960-400LF 10091767-00C-20DLF 10091799-101LF 950-400A-B1D 951400C20D AX400-00566
Description MALE, STRAIGHT TWO PART BOARD CONNECTOR, PRESS FIT MALE, STRAIGHT TWO PART BOARD CONNECTOR, PRESS FIT MULTIWAY RACK AND PANEL CONN, RECEPTACLE 75 CONTACT(S), FEMALE, RIGHT ANGLE TWO PART BOARD CONNECTOR, PRESS FIT MALE, STRAIGHT TWO PART BOARD CONNECTOR, PRESS FIT MALE, STRAIGHT TWO PART BOARD CONNECTOR, PRESS FIT
Urgently looking for wireless identification device for undergraduate B in 2007
[i=s]This post was last edited by paulhyde on 2014-9-15 09:38[/i] I have a graduation project to do, but I have no idea what to do. Can anyone who has done it send me a copy? I would be very grateful!...
sunshinejimmy Electronics Design Contest
Characteristics of pulse circuit
[p=26, null, left][color=rgb(79, 79, 79)][size=4] 1) The transistors in the pulse circuit work in a switching state. In most cases, the transistor works in the saturation region or cutoff region of th...
fish001 Analogue and Mixed Signal
ARM9200 interrupt problem
The code fixed in Flash is first moved to SDRAM for execution, but when an interrupt occurs, it seems to run back to Flash for execution. What is going on? How can I make the interrupt also run in SDR...
20064484 ARM Technology
About Power
The voltage source has a stable output voltage, the current source has a stable output current, so the power source should have a stable output power. This makes me wonder, how can the output power be...
secondlife110 Power technology
"FormTest" or one of its components could not be found. Please make sure that the path and file name are correct and that all required libraries are available.
Development tools: 2005 .net Device operating system: ce4.2 symbol MC3000 compact 2.0 sp1 has been installed compact 2.0 sp2 has been installed Code: No code has been written, just create a Form, add ...
huangluling Embedded System

EEWorld
subscription
account

EEWorld
service
account

Automotive
development
circle

Robot
development
community

Index Files: 1861  1648  1534  595  1538  38  34  31  12  21 
Datasheet   0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z
Room 1530, 15th Floor, Building B, No. 18 Zhongguancun Street, Haidian District, Beijing Telephone: (010) 82350740 Postal Code: 100190
Copyright © 2005-2026 EEWORLD.com.cn, Inc. All rights reserved 京ICP证060456号 京ICP备10001474号-1 电信业务审批[2006]字第258号函 京公网安备 11010802033920号