Do not use relays under exceeding conditions such as over ambient temperature, over voltage and over current.
Incorrect use could result in abnormal heating, damage to related parts or cause burning.
READ CAUTIONS IN THE SELECTION GUIDE.
Read the cautions described in NEC/TOKIN's "Miniature Relays" when your choose relays for your application.
The information in this document is subject to change without notice.
•
•
•
All specifications in this catalog and production status of products are subject to change without notice. Prior to the purchase, please contact NEC Tokin for updated product data.
Please request for a specification sheet for detailed product data prior to the purchase.
Before using the product in this catalog, please read “Precautions” and other safety precautions listed in the printed version catalog.
2006.03.24 P0614EMDD03V0L02E
UC2/UD2 SERIES
DIMENSIONS AND PAD LAYOUTS
(Unit : mm [inch])
UC2 SERIES
mm [inch]
10.6 [0.417]
6.5 [0.256]
3.2
7.6
2.2
2.2
(mm)
8- 0.85
5.3 [0.209]
3.4 [0.134]
2.8 [0.110]
(1.5)
3.2
2.2
2.2
[0.126] [0.087] [0.087]
(1.5)
5.08
[0.2]
(Bottom view)
Note.
General tolerance :
±0.1
Tolerance of lead pitch is :
±0.15
mm [0.006inch]
Another tolerance is
±0.3
mm [0.012 inch]
( ) is reference value.
Value of trimmed lead type (NJ type)
UD2 SERIES
• STANDARD
mm [inch]
3.2
10.6 [0.417]
5.45 [0.215] max.
(mm)
2.2
2.2
6.5 [0.256]
0.2
(1.5)
3.2
2.2
2.2
[0.126] [0.087] [0.087]
(1.5)
5.08 [0.2]
8.4 [0.331]
0.8
2.66
Tolerance of lead pitch is :
±0.15
mm [0.006inch]
Another tolerance is
±0.3
mm [0.012 inch]
( ) is reference value.
(Bottom view)
Note.
General tolerance :
±0.1
• MINIMUM FOOTPRINT TYPE
mm [inch]
3.2
10.6 [0.417]
6.5 [0.256]
2.2
2.2
(mm)
6.0 [0.236] max.
0.2
(1.5)
3.2
2.2
2.2
[0.126] [0.087] [0.087]
(1.5)
5.08 [0.2]
6.8 [0.268]
1.86
0.8
Tolerance of lead pitch is :
±0.15
mm [0.006inch]
Another tolerance is
±0.3
mm [0.012 inch]
( ) is reference value.
(Bottom view)
Note.
General tolerance :
±0.1
2
•
•
•
All specifications in this catalog and production status of products are subject to change without notice. Prior to the purchase, please contact NEC Tokin for updated product data.
Please request for a specification sheet for detailed product data prior to the purchase.
Before using the product in this catalog, please read “Precautions” and other safety precautions listed in the printed version catalog.
2006.03.24 P0614EMDD03V0L02E
5.94
6.74
5.08
UC2/UD2 SERIES
PIN CONFIGURATIONS
(bottom view)
UC2 SERIES
1
2
3
4
1
2
3
4
+
+
R S
Index mark of
relay direction
8
7
6
5
+
8
7
6
5
Non-latch type
(not energized position)
Single coil latch type
(reset position)
S : Coil polarity of set (operate)
R : Coil polarity of reset (release)
UD2 SERIES
+
1
2
3
4
+
R S
1
2
3
4
Index mark of
relay direction
8
7
6
5
+
8
7
6
5
Non-latch type
(not energized position)
Single coil latch type
(reset position)
S : Coil polarity of set (operate)
R : Coil polarity of reset (release)
MARKINGS
(top view)
<2>
<1>
<3>
<1> Part number
JAPAN
UD2
<5>
0035
4. 5 N U
<2> Manufacturer
<3> Country of origin
<4> Date code
<5> Index mark of relay direction
(pin No. 1, 8)
<4>
SAFETY STANDARD AND RATING
UL Recoginzed
(UL508)*
File No.E73266
CSA Certified
(CSA C22.2 No. 14)
+
File No.LR46266
TUV Certified
(EN61810)
No. 2050596
Creepage and clearance of coil to contact is over
than 2 mm (According EN60950)
Basic insulation class
30 Vdc,1A (resistive)
110 Vdc, 0.3A (resistive)
125 Vac,0.5A (resistive)
*Spacing : UL840
+
Spacing : CSA std950
3
•
•
•
All specifications in this catalog and production status of products are subject to change without notice. Prior to the purchase, please contact NEC Tokin for updated product data.
Please request for a specification sheet for detailed product data prior to the purchase.
Before using the product in this catalog, please read “Precautions” and other safety precautions listed in the printed version catalog.
2006.03.24 P0614EMDD03V0L02E
UC2/UD2 SERIES
PERFORMANCE CHARACTERISTICS
(Community)
Contact Form
Maximum Switching Power
Contact Ratings
Maximum Switching Voltage
Maximum Switching Current
Maximum Carrying Current
Minimun Contact Ratings
Initial Contact Resistance
Contact Material
Nominal Operating Power
Non-Latch Type
Single Coil Latch Type
2 Form c
30W (resistive)
220 Vdc
1A
1A
10 mV.dc, 10
µ
A
100 m
4
37.5 VA (resistive)
250 Vac
Max. (Initial)
Silver alloy with gold alloy overlay
140 to 230 mW
100 to 120 mW
Approximately 2 ms
Approximately 1 ms without diode
1000 M
Between Open Contacts
Between Adjacent Contacts
Between Coil and Contacts
1500 Vac for one minute (2500 V surge, 2
×
10
µ
s
1
)
735 m / s
2
(misoperating)
980 m / s
2
(destructive failure)
10 to 55 Hz at double amplitude of 3 mm
(misoperating)
10 to 55 Hz, double amplitude of 5 mm
(Destructive failure)
–40 to +85°C
18 degrees at nominal coil voltage (140 mW)
No-load
5
×
10
7
7
3
Operate Time (Excluding Bounce)
Release Time (Excluding Bounce)
Insulation Resistance
Breakdown Voltage
at 500 Vdc
1000 Vac for one minute (1500 V surge, 10
×
160
µ
s
1
)
Shock Resistance
Vibration Resistance
Ambient Temperature
Coil Temperature Rise
operations (Non-latch type)
Running specifications
Load
Weight
1
2
1
×
10 operations (Latch type)
30 Vdc 1 A (resistive), 1
×
10
5
operations at 20°C
125 Vac 0.3 A (resistive), 1
×
10
5
operations at 20°C
Approximately 0.8 grams
rise time : 10
µ
s, decay time to half crest : 160
µ
s
rise time : 2
µ
s, decay time to half crest : 10
µ
s
3
This shows a number of operation where it can be running by which a fatal is not caused, and number of operation by which a
4
steady characteristic is maintained is 1
×
10
7
operations.
This value is a reference value in the resistive load.
Minimum capacity changes depending on switching frequency and enviroment temperature and the load.
RECOMMENDED RELAY DRIVE CONDITIONS
Drive under conditions. If it is impossible, please inquire to NEC/TOKIN.
Nonlatch type
Single coil latch type
Voltage : within
±5%
st nominal voltage
Square pulse (rise and fall time is rapidly)
Pulse height : within
±5%
at nomianl voltage
Pulse width : More than 10 ms
Ambient temperature
40
+85°C
4
•
•
•
All specifications in this catalog and production status of products are subject to change without notice. Prior to the purchase, please contact NEC Tokin for updated product data.
Please request for a specification sheet for detailed product data prior to the purchase.
Before using the product in this catalog, please read “Precautions” and other safety precautions listed in the printed version catalog.
Minimum footprint type with Silver-Nickel alloy contact
Latch type Nil: Nonlatch type
S: Single coil latch type
Nominal coil voltage
A numerical value of coil voltage (See the following lineup)
Series name
5
•
•
•
All specifications in this catalog and production status of products are subject to change without notice. Prior to the purchase, please contact NEC Tokin for updated product data.
Please request for a specification sheet for detailed product data prior to the purchase.
Before using the product in this catalog, please read “Precautions” and other safety precautions listed in the printed version catalog.
I used this software to debug the delay time, but found that the situation did not seem good.
After I changed the delay program, I ran it again, but found that the delay time remained unchanged.
void ...
What is the current of a relay? I have been looking online for a long time but there is no definite answer. I have read a lot of specifications but I don't know what they say. I am confused. I hope ex...
LED is the abbreviation of "LIGHT EMITTING DIODE" in English, and Chinese abbreviation is light emitting diode. Due to its many advantages such as environmental protection, long life, high photoelectr...
There are several problems when ADC samples two sets of DAC output voltages, as shown in the figure. In addition, if the signal is about 1uA, do we need a 20-bit ADC chip? Do we need to consider the f...
There are still 5 PCB boards. Interested friends can continue to apply: [url=https://bbs.eeworld.com.cn/thread-95123-1-1.html]https://bbs.eeworld.com.cn/thread-95123-1-1.html[/url] There are still a f...
This program is written to simulate the serial port hardware mechanism. When used, a timed interrupt can be set with a time interval of 1/4 baud rate. The receiving function is called once for ea...[Details]
A single-chip microcomputer is also called a single-chip microcontroller. It is not a chip that completes a certain logical function, but a computer system integrated into one chip. In general, a c...[Details]
At present, the traffic congestion in cities is quite serious. According to relevant news reports: In China, the traffic congestion has expanded from megacities such as Beijing, Shanghai, and Guang...[Details]
1. Introduction
Since the 1980s, with the continuous development of automotive electronic technology, there are more and more electronic control units in automobiles, such as electronic fuel i...[Details]
In recent years, the market for mobile/portable devices such as smartphones and laptops has continued to grow rapidly. While these products continue to integrate more new features to enhance the ...[Details]
1. Introduction
Light control circuit plays a vital role in urban street lamps or corridor lighting. With light control circuit, the lights can be automatically turned on and off according to ...[Details]
DSP (digital signal processor) is used more and more frequently in today's engineering applications. There are three main reasons for this: first, it has powerful computing power and is capable of ...[Details]
The automotive lighting and signal control system is responsible for controlling the vehicle's lighting, signal lights, electric horns, reversing and brake buzzers. Traditional automotive lighting...[Details]
The typical fault troubleshooting listed below is for reference of maintenance personnel.
When the computer is turned on, the indicator light is off and there is no screen display
Mainte...[Details]
In recent years, with the rapid development of the information industry, dot matrix LED display screens have been widely used in various advertising and information display systems such as the fina...[Details]
Capacitance Measurement
Used to verify that capacitors meet the manufacturer's specifications. For quality control, a group of capacitors may be placed in an environmental chamber and the cap...[Details]
Today, the value of electronic components in cars accounts for 15-20% of the total vehicle. In the future, this proportion may be as high as 30-40% as more safety electronics, fuel consumption and ...[Details]
Introduction
Automakers are working to reduce vehicle weight to reduce CO2 emissions and improve fuel efficiency. Designers are therefore seeking new technologies and design techniques that can...[Details]
0 Introduction
There are many types of sensors, and the working principles, measurement targets and measurement environments of different types of sensors vary greatly. The corresponding detection s...[Details]
With the continuous advancement of various technologies in the field of measurement and control, the baseband subsystem of general measurement and control equipment has entered the fourth generation o...[Details]
Microcontroller MCU
京公网安备 11010802033920号
EEWORLD
